Abstract:Surface plasmon resonance (SPR), a promising technology, is beneficial for various applications, such as photothermal conversion, solar cells, photocatalysts, and sensing. However, the SPR performance may be restricted by the 1D- or 2D-distributed hotspots. The bicontinuous interconnected gyroid-structured materials have emerged in light energy conversion due to a high density of 3D-distributed hotspots, ultrahigh light–matter interactions and large scattering cross-section. Here, a series of bioinspired Au–CuS gyroid-structured materials are fabricated by precisely controlling the deposition time of CuS nanoparticles (NPs) and then adopted for solar steam generation. Specifically, Au–CuS/GMs-80 present the highest evaporation efficiency of 88.8% under normal 1 sun, with a suitable filling rate (57%) and a large inner surface area (∼2.72 × 105 nm2 per unit cell), which simultaneously achieves a dynamic balance between water absorption and evaporation as well as efficient heat conduction with water in nanochannels. Compared with other state-of-the-art devices, Au–CuS/GMs-80 steam generator requires a much lower photothermal component loading (<1 mg cm–2) and still guarantees outstanding evaporation performance. This superior evaporation performance is attributed to broadband light absorption, continuous water supply, excellent heat generation and thermal insulation, and good light–heat–water interaction. The combination of 3D interconnected nanostructures with controllable metal–semiconductor deposition could provide a new method for the future design of high-performance plasmonic devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c06701?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c06701</a>.Summarization of various samples; characterizations of H. glaucippe; optical microscopy image and lower magnification SEM image of Au–CuS/GMs-80; TEM images of Au seeds/GMs from the top view; TEM cross-section images of O/GMs, Au seeds/GMs, and Au-CuS/GMs; Au-CuS layer thickness of Au–CuS/GMs with different tCuS values; thickness curve of Au–CuS films and the proportion of the Au NP radius; XPS result of Au–CuS/GMs; fitting curves of FR and S; water contact angles of O/GMs and Au–CuS/GMs; SERS signals detected from Au/GMs-SERS and Au/LMs-SERS; solar steam generation performances of the samples; average weight of Au–CuS/GMs-80 scales; SEM images of Au–CuS/GMs-80 before and after 50 cycles of solar steam generation; optical image of the Au–CuS/GMs-80 lower surface after the irradiation of 808 nm light; efficiencies of various steam-generation devices under solar light; and efficiencies of various steam-generation devices under NIR light (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c06701/suppl_file/am0c06701_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Gyroid‐Structured Au Materials with 3D Interconnected Networks for Highly Efficient Heat Localization and Solar Vapor Generation

Efficient Water Transport and Solar Steam Generation Via Radially, Hierarchically Structured Aerogels

3D Interconnected Gyroid Au–CuS Materials for Efficient Solar Steam Generation

Dual Plasmons with Bioinspired 3D Network Structure Enabling Ultrahigh Efficient Solar Steam Generation

Three dimensional hydrogel evaporator made of nano level antireflection particles for high-efficiency solar steam generation

Biomimetic Superstructures Assembled from Au Nanostars and Nanospheres for Efficient Solar Evaporation

High-absorption Solar Steam Device Comprising Au@Bi2MoO6-CDs: Extraordinary Desalination and Electricity Generation

Solar Absorber Gel: Localized Macro‐Nano Heat Channeling for Efficient Plasmonic Au Nanoflowers Photothermic Vaporization and Triboelectric Generation

Enhanced Photothermal Steam Generation and Gold Using the Efficiency of Ultralight Gold Foam with Hierarchical Porosity

The Dispersion of Au Nanorods Decorated on Graphene Oxide Nanosheets for Solar Steam Generation

Gas Foaming Guided Fabrication of 3D Porous Plasmonic Nanoplatform with Broadband Absorption, Tunable Shape, Excellent Stability, and High Photothermal Efficiency for Solar Water Purification

A green and efficient strategy facilitates continuous solar-induced steam generation based on tea-assisted synthesis of gold nanoflowers

Amphipathic Janus Nanofibers Aerogel for Efficient Solar Steam Generation

A hierarchical porous aerohydrogel for enhanced water evaporation

Ultralight anisotropic Ti3C2Tx MXene/Carbon nanotube hybrid aerogel for highly efficient solar steam generation

Biomimetic Difunctional Carbon-Nanotube-Based Aerogels for Efficient Steam Generation

A 3D Photothermal Structure Toward Improved Energy Efficiency in Solar Steam Generation

Versatile PVA/CS/CuO Aerogel with Superior Hydrophilic and Mechanical Properties Towards Efficient Solar Steam Generation

Hierarchical porous metallic glass with strong broadband absorption and photothermal conversion performance for solar steam generation

High Efficient 3D Solar Interfacial Evaporator: Achieved by the Synergy of Simple Material and Structure

Bioinspired design of electrospun nanofiber based aerogel for efficient and cost-effective solar vapor generation