Abstract:Novel visible-light-driven heterostructure semiconductors are considered as promising photocatalysts for the elimination of environmental organic pollutants. Herein, a solvent-assisted low-temperature in situ calcination strategy was developed to fabricate type II BiOIO3/Bi4O5I2 heterojunction by using BiOIO3 as self-sacrificed template. The phase transition temperature of BiOIO3 was reduced under solvent-assisted operating conditions. By controlling the elevated temperature from 200 to 300 °C, an in situ stepwise pyrolysis reaction occurred during the calcination process, which was described as BiOIO3 → BiOIO3/Bi4O5I2 → Bi4O5I2. The light absorption edge of different samples significantly red shifted from 385 to 632 nm with the increase of calcination temperature. Meanwhile, two interlocked interface lattice fringes were identified in high resolution transmission electron microscope (HRTEM) of BiOIO3/Bi4O5I2-250 composites, confirming the formation of BiOIO3/Bi4O5I2 heterojunction. The as-obtained BiOIO3/Bi4O5I2 heterojunction demonstrated the optimal photodegradation performance, which brought about 99.4% of bisphenol A (BPA) degraded within 30 min visible light (λ > 420 nm) illumination. Besides, after 5 repeated cycles, the photoactivity of BiOIO3/Bi4O5I2 heterojunction still maintained 91.5%, unfolding its high photostability. The superior photoreactivity of BiOIO3/Bi4O5I2 nanosheets was assigned to the formation of well-matched type II heterojunction, which significantly enhanced the separation and migration of photoinduced charge carriers. Superoxide radical (O2-) and hole (h+) are dominant reactive species in this photodegradation system. Based on active species quenching experiments and electron paramagnetic resonance (ESR) measurements, a possible type II heterojunction mechanism for enhanced photodegradation performance of BiOIO3/Bi4O5I2 heterostructure was proposed. This work affords an innovative method for design and construction of type II composites toward sustainable water purification.

In situ preparation of <i>p</i>-<i>n</i> BiOI@Bi<sub>5</sub>O<sub>7</sub>I heterojunction for enhanced PFOA photocatalytic degradation under simulated solar light irradiation

Insights into the Intrinsic Mechanisms Underlying the Ultra-Highly Efficient Degradation of PFOA over S-scheme Heterojunction of Bi7O5F11/BiOF

Decomposition of highly persistent per fl uorooctanoic acid by hollow Bi/BiOI<sub>1-x</sub>F<sub>x</sub>: Synergistic e ff ects of surface plasmon resonance and modified band structures

Insights into the degradation mechanism of perfluorooctanoic acid under visible-light irradiation through fabricating flower-shaped Bi5O7I/ZnO n-n heterojunction microspheres

Efficient photocatalytic decomposition of PFOA over BiOI 1-x with low power LED light

High-performance Photocatalytic Decomposition of PFOA by BiOX/TiO2 Heterojunctions: Self-induced Inner Electric Fields and Band Alignment

Enhanced selective photocatalytic reduction and oxidation of perfluorooctanoic acid on Bi/Bi 5 O 7 I decorated with poly (triazine imide)

In Situ Preparation of a Bi2O2CO3/BiOI with 2D/2D P-N Heterojunction Photocatalyst for Water Purification under Visible Light.

Improved visible-light photocatalytic degradation of pollutants under the synergistic effect of BiOI/BiFeWO 6 p-n heterojunction and oxygen vacancies

Ionic liquid-assisted fabrication of metal–organic framework-derived indium oxide/bismuth oxyiodide p-n junction photocatalysts for robust photocatalysis against phenolic pollutants

Improved Visible-Light Photocatalytic Degradation of Pollutants under the Synergistic Effect of BiOI/BiFeWO6 P-N Heterojunction and Oxygen Vacancies

Enhanced Selective Photocatalytic Reduction and Oxidation of Perfluorooctanoic Acid on Bi/Bi5O7I Decorated with Poly (triazine Imide)

Chemical Etching Preparation of the Bi2WO6/BiOI P–n Heterojunction with Enhanced Photocatalytic Antifouling Activity under Visible Light Irradiation

Synergistic introducing of oxygen vacancies and hybrid of organic semiconductor: Realizing deep structure modulation on Bi<sub>5</sub>O<sub>7</sub>I for high-efficiency photocatalytic pollutant oxidation

Interface engineered fabrication of Bi4O7/BiOCl 1D/2D p-n heterojunction for enhanced visible light driven photocatalysis

In Situ Assembly of BiOI@Bi12O17Cl2 P-N Junction: Charge Induced Unique Front-Lateral Surfaces Coupling Heterostructure with High Exposure of BiOI {001} Active Facets for Robust and Nonselective Photocatalysis

Efficient photodegradation of PFOA using spherical BiOBr modified TiO2 via hole-remained oxidation mechanism

In Situ Low-Temperature Pyrolysis Fabrication Type Ii Bioio3/Bi4o5i2 Heterostructures with Enhanced Visible-Light-Driven Photooxidation Activity

Atomic Interfacial Structure and Charge Transfer Mechanism on In-Situ Formed BiOI/Bi2O2SO4 P–n Heterojunctions with Highly Promoted Photocatalysis

BiOI/Bi2O2[BO2(OH)] Heterojunction with Boosted Photocatalytic Degradation Performance for Diverse Pollutants under Visible Light Irradiation

A facile approach to construct BiOI/Bi5O7I composites with heterostructures: efficient charge separation and enhanced photocatalytic activity