Abstract:Due to the detrimental effect on tool life, material removal efficiency, and workpiece surface equality, chatter has become a major obstacle to high-performance milling. According to the previous research, the active noise equalizer (ANE) can decrease chatter frequencies with having a little influence on normal frequencies, which satisfies the initial control requirement for optimization of actuator performance. Recent researches show that chatter frequencies are time-varying with broadband characteristic in thin-walled component milling. However, tradition studies focused on invariant line spectrum chatter frequency suppression, which cannot meet the time-varied need. To this end, in this research, the real-time fast Fourier transform (FFT) identification is introduced into ANE, which can update the reference chatter frequencies for time-varying chatter frequencies’ suppression in thin-walled workpiece milling. However, during the period between two FFT, the identified frequencies remain unchanged, which will deviate from the real chatter frequencies and disable the controller. In order to deal with this problem, the modified narrowband filtered-x least mean square (NFXLMS) is combined with the real-time FFT identification for time-varying chatter frequencies suppression. The modified NFXLMS is a narrowband active control algorithm, which can handle the small change of chatter frequencies during the period between two FFT. Simulation results show that the proposed two control algorithms can both suppress the time-varying chatter frequencies effectively. The modified NFXLMS has better control effect than ANE, but it has larger impacts every time the chatter frequencies are identified by FFT. Finally, the thin-wall workpiece milling tests are implemented. The off-line simulation based on practical experimental data is carried out that indicates that the developed algorithms work well in practice.

Adaptive Removal of Time-Varying Harmonics for Chatter Detection in Thin-Walled Turning

On-line chatter detection and identification based on wavelet and support vector machine

Detecting Oscillations Via Adaptive Chirp Mode Decomposition.

A novel adaptive control algorithm for the rejection of harmonics in a standard vibrator

Feature Extraction of Chatter for Precision Hole Boring Processing Based on EMD and HHT

Prediction of Cutting Chatter Based on Hidden Markov Model

Early Chatter Identification of Robotic Boring Process Using Measured Force of Dynamometer

Chatter suppression by parametric excitation: Model and experiments

Adaptive threshold discrimination and synchronous squeezing transform for high-speed milling chatter detection

An effective EMD-based feature extraction method for boring chatter recognition

Real time FFT identification based time-varying chatter frequency mitigation in thin-wall workpiece milling

Investigation on Milling Chatter Identification at Early Stage with Variance Ratio and Hilbert–Huang Transform

Development of a novel online chatter monitoring system for flexible milling process

Chatter Detection in Turning Using Machine Learning and Similarity Measures of Time Series via Dynamic Time Warping

Milling chatter detection with WPD and power entropy for Ti-6Al-4V thin-walled parts based on multi-source signals fusion

Digital Modeling-Driven Chatter Suppression for Thin-Walled Part Manufacturing

Online chatter detection in robotic machining based on adaptive variational mode decomposition

Investigation on Adaptive Filter for On-Line Detection and Active Control of Chatter Vibration in Milling Process

Time-varying dynamics updating method for chatter prediction in thin-walled part milling process

Topological Feature Vectors for Chatter Detection in Turning Processes

Spectral Interference Rejection Algorithm for Beat Frequency Estimation in Machining Chatter