Abstract:Due to the detrimental effect on tool life, material removal efficiency, and workpiece surface equality, chatter has become a major obstacle to high-performance milling. According to the previous research, the active noise equalizer (ANE) can decrease chatter frequencies with having a little influence on normal frequencies, which satisfies the initial control requirement for optimization of actuator performance. Recent researches show that chatter frequencies are time-varying with broadband characteristic in thin-walled component milling. However, tradition studies focused on invariant line spectrum chatter frequency suppression, which cannot meet the time-varied need. To this end, in this research, the real-time fast Fourier transform (FFT) identification is introduced into ANE, which can update the reference chatter frequencies for time-varying chatter frequencies’ suppression in thin-walled workpiece milling. However, during the period between two FFT, the identified frequencies remain unchanged, which will deviate from the real chatter frequencies and disable the controller. In order to deal with this problem, the modified narrowband filtered-x least mean square (NFXLMS) is combined with the real-time FFT identification for time-varying chatter frequencies suppression. The modified NFXLMS is a narrowband active control algorithm, which can handle the small change of chatter frequencies during the period between two FFT. Simulation results show that the proposed two control algorithms can both suppress the time-varying chatter frequencies effectively. The modified NFXLMS has better control effect than ANE, but it has larger impacts every time the chatter frequencies are identified by FFT. Finally, the thin-wall workpiece milling tests are implemented. The off-line simulation based on practical experimental data is carried out that indicates that the developed algorithms work well in practice.

Spectral Interference Rejection Algorithm for Beat Frequency Estimation in Machining Chatter

Detecting Oscillations Via Adaptive Chirp Mode Decomposition.

On-line chatter detection and identification based on wavelet and support vector machine

Feature Extraction of Chatter for Precision Hole Boring Processing Based on EMD and HHT

Early Chatter Identification of Robotic Boring Process Using Measured Force of Dynamometer

An effective EMD-based feature extraction method for boring chatter recognition

Development of a novel online chatter monitoring system for flexible milling process

Adaptive threshold discrimination and synchronous squeezing transform for high-speed milling chatter detection

Real time FFT identification based time-varying chatter frequency mitigation in thin-wall workpiece milling

Cutting chatter recognition based on spectrum characteristics and extreme gradient boosting

Milling Chatter Detection Based on Information Entropy of Interval Frequency

A New Algorithm for Chatter Quantification and Milling Instability Classification Based on Surface Analysis

Chatter detection in simulated machining data: a simple refined approach to vibration data

Milling Chatter Detection Based on VMD and Difference of Power Spectral Entropy

Timely chatter identification for robotic drilling using a local maximum synchrosqueezing-based method

Investigation on Milling Chatter Identification at Early Stage with Variance Ratio and Hilbert–Huang Transform

Milling chatter monitoring based on sparse representation and image similarity measurement

Investigation on an in-process chatter detection strategy for micro-milling titanium alloy thin-walled parts and its implementation perspectives

A Novel Approach for Chatter Online Monitoring Using Coefficient of Variation in Machining Process

A novel chatter detection method in micro-milling process using wavelet packet entropy

Feasible spindle speed interval identification method for large aeronautical component robotic milling system