Abstract:Top left: TEM image of a helical carbon nanotube, Top right: mechanical behavior of 1% SCNT and 1% HCNT epoxy nanocomposite, Bottom: observed deformation and failure patterns. This paper is aimed at an experimental investigation of the effect of straight and helical carbon nanotubes on the compressive behavior of epoxy nanocomposites. The epoxy nanocomposites are fabricated with varying levels of SCNT and HCNT, each with two different fabrication techniques viz. high shear mixing and ultrasonication. In samples made using high shear mixing, the compressive strength is found to actually decrease, due to poor dispersion of the CNTs, resulting in voids and clumps, which can adversely affect the strength. Ultrasonic homogenization is found to better disperse the CNTs within the epoxy resin with nearly a 10‐fold decrease in the heterogeneity size. Compression tests conducted on the ultrasonically homogenized CNT‐epoxy nanocomposites indicate a modest increase in the compressive strength. The best increase of 5% is obtained with 1% SCNT. On the other hand, the HCNT samples show a higher post‐peak residual stress suggesting an improved mode II/III fracture toughness. The high shear mixed samples exhibit a bulging deformation with no clear evidence of shear localization. On the other hand, the ultrasonic homogenization (UH) samples bulge and eventually show a clear localized shear band, likely due to a smaller heterogeneity size. Some samples with relatively poor dispersion exhibit an axial splitting failure and a comparatively low compressive strength. In addition, it is demonstrated that using acetone as a solvent during dispersion can affect the curing kinetics, which results in a nanocomposite with a rubbery consistency with low stiffness and strength, but high deformability. Highlights Straight and helical CNTs impact the compressive behavior of epoxy nanocomposites High shear mixing reduces compressive strength due to poor CNT dispersion Ultrasonication improves CNT dispersion but modest rise in compressive strength HCNTs cause higher post‐peak residual stress suggesting higher toughness Using acetone affects curing, leading to rubbery, deformable nanocomposites.

Epoxy/CNT@X Nanocomposite: Improved Quasi-Static, Dynamic Fracture Toughness, and Conductive Functionalities by Non-Ionic Surfactant Treatment

Length-dependent Electrical and Thermal Properties of Carbon Nanotube-Loaded Epoxy Nanocomposites

Single Carbon Fiber/Acid-Treated CNT-Epoxy Composites by Electro- Micromechanical Technique and Wettability Test for Dispersion and Self-Sensing

Poly(methyl Methacrylate)-Decorated Single Wall Carbon Nanotube/epoxy Nanocomposites with Re-Agglomeration Networks: Rheology and Viscoelastic Damping Performance

Improving Insulation Properties of Epoxy Filled with Surface Fluorinated Polystyrene Nanospheres

Improved Dynamic Compressive and Electro-Thermal Properties of Hybrid Nanocomposite Visa Physical Modification

Preparation and functional study of epoxy composites reinforced with ultra-low content single-walled carbon nanotubes

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Insight into the mechanical properties and thermal expansion behavior of epoxy nanocomposites reinforced with multi‐walled carbon nanotube solvent‐free nanofluids

Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites

Adhesion Strengthening Mechanism of Carbon Nanotube-Embedded Epoxy Composites: A Fracture-Based Approach

Toughing epoxy nanocomposites with Graphite-Nanocellulose layered framework

Enhancing mechanical properties of an epoxy resin using “liquid nano-reinforcements”

Tensile, Quasistatic And Dynamic Fracture Properties Of Nano-Al2o3-Modified Epoxy Resin

An integrated nanofiller spray and nanosecond pulse electrically-assisted method for synergistically interlaminar toughening and in-situ damage monitoring of CFRP composites

Surface-related capacitance of microporous carbons in aqueous and organic electrolytes

Enhanced thermomechanical properties of epoxy-multiwalled CNT nano-composites

Synergistic toughening of epoxy resin by block ionomers and carbon nanofibers

Experimental investigation of the compressive behavior of epoxy nanocomposites reinforced with straight and helical carbon nanotubes

Molecular Dynamics Analysis of Surface-Modified Carbon Nanoparticle Reinforced Epoxy Resin

Synergistically enhanced performance of epoxy resin by block copolymer and multi‐walled carbon nanotubes