Abstract:This article proposes two new topologies of DC series‐parallel active compensators for voltage and current compensation in DC microgrids. In the first topology, the back‐to‐back connection of an isolated bidirectional DC/DC converter with a full‐bridge converter is used to compensate voltage and current. In the second one, to eliminate the transformer, simplifying the converter structure and reducing its cost, an active compensator based on a three‐leg voltage source converter is proposed which can compensate both the microgrid voltage harmonics, sag and swell, and the load current harmonics DC microgrids are gaining increasing attention due to their advantages such as high reliability, high efficiency, ease of renewable energy sources integration, and the absence of frequency and reactive power regulation problems. Connection of AC energy sources and loads to the DC microgrids through AC/DC converters can distort the DC microgrids voltage and current. In addition, the fault occurrence in the DC or upstairs AC microgrids can cause voltage sag and swell. Compensating and reducing these voltage and current distortions requires efficient and cost‐effective solutions. This article proposes two new topologies of DC series‐parallel active compensators for voltage and current compensation in DC microgrids. In the first topology, the back‐to‐back connection of an isolated bidirectional DC/DC converter with a full‐bridge converter is used to compensate voltage and current. In the second one, to eliminate the transformer, simplify the converter structure and reduce its cost, an active compensator based on a three‐leg voltage source converter is proposed which can compensate both the microgrid voltage harmonics, sag and swell, and the load current harmonics. The proposed topologies performances are confirmed through their simulation in the MATLAB/SIMULINK environment. A simple experimental setup is also provided to validate the simulation results.

Active Compensator for Multi-Paralleled Grid-Tied Inverters under variable Grid Conditions

Design of Grid-tied Inverters with the Functions of Reactive and Harmonic Compensation

Coordination of Multiple Grid-Connected Inverters for Harmonic Compensation

Resonance suppression for grid-connected multi-inverter based on active damping method

A Hybrid Static Compensator for Dynamic Reactive Power Compensation and Harmonic Suppression

Power Control Flexibilities for Grid-Connected Multi-Functional Photovoltaic Inverters

An Active Compensator to Counteract the Effects of Grid Impedance in Grid-Connected Inverter with an LCL Filter

Enhancement of Withstand Capability of Grid-Tied Inverters during transients, utilizing dc-side magnitudes

Active Power Compensation in Microgrids and Nanogrids under the Loss of Synchronization

A new series‐parallel active compensator for DC microgrids based on three‐leg voltage source converter

Low-Loss Active Grid Impedance Cancellation in Grid-Connected Inverters with LCL Filter

Secondary Frequency Regulation and Stabilization Method of Islanded Droop Inverters Based on Integral Leading Compensator

Enhanced Adaptive Virtual Impedance Control Method for Harmonic Voltage Mitigation in Parallel Grid-Forming Inverters

Flexible Pcc Voltage Unbalance Compensation Strategy for Autonomous Operation of Parallel Dfigs

Unbalanced Voltage Compensating And Current Sharing Strategy Of Parallel Converters In Islanded Microgrids

Harmonic and Reactive Currents Sharing by Multi-Functional Grid-Connected Inverters in A Micro-Grid

Cost-Effective DC Current Suppression for Single-Phase Grid-Connected PV Inverter

Sharing of Active Power Supply and Reactive Power Compensation for Parallel Inverters

The Research Status and Prospect of Hybrid Var Compensator and the Filter Combined System

Coordinated Second-Order Voltage Harmonic Mitigation in Hybrid Microgrids

Reactive Power Compensation For Parallel Inverters Without Control Interconnections In Microgrid