Abstract:Purpose The purpose of this paper is to validate an assumption of what to use as an effective (steady state) heat transfer coefficient of thermal conductivity for the honeycomb core sandwiched by Fiberglass face sheets composite. A one-dimensional model based on Fourier law is developed. The results are validated experimentally. Design/methodology/approach The results were obtained from the one-dimensional mathematical model of an overall or effective heat conductivity of the Honeycomb composite panel. These results were validated experimentally by applying heat flux on the specimen under controlled environment. The surface temperatures at different voltages were recorded and analysed. The skin of the sandwich composite material used in the investigation was Fiberglass sheet with a thickness of 0.5 mm at the bottom and 1.0 mm at the top surface. Both skins have a stacking sequence of zero degrees. Due to the presence of air cells in the core (Honeycomb), the model considers the conduction, convection and radiation heat transfer, across the thickness of the panel, combined as an effective conduction mode, whose value may be predicted by using the coefficient of thermal conductivity of the air based on the average temperature difference between the two skins. The experimental results for the heat transfer through the thickness of the panel provide validation of this assumption/prediction. Both infrared thermography and conventional temperature measurement techniques (thermocouples) were used to collect the data. Findings The heat transfer experiment and mathematical modeling were conducted. The data obtained were analyzed, and it was found that the effective thermal conductivity was temperature-dependent as expected. The effective thermal conductivity of the honeycomb panel was close to that of air, and its value could be predicted if the panel surface temperatures were known. It was also found that as temperature raised the variation between experimental and predicted effective air conduction raised up. This is because there was an increase in molecular diffusion and vibration. Therefore, the convection heat transfer increased at high temperatures and the air became an insulator. Originality/value Honeycomb composite panels have excellent physical and thermal properties that influence their performance. This study provides an appropriate method in determining thermal conductivity, which is one of the critical thermal properties of porous composite material. This paper also gives useful and practical data to industries that use or manufacture honeycomb composite panels.

An X-lattice Cored Rectangular Honeycomb with Enhanced Convective Heat Transfer Performance

Convective Heat Transfer in a Lightweight Multifunctional Sandwich Panel with X-type Metallic Lattice Core

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

A Lightweight X-type Metallic Lattice in Single-Phase Forced Convection

Analytical Design of Effective Thermal Conductivity for Fluid-Saturated Prismatic Cellular Metal Honeycombs

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Experimental, numerical and theoretical study on heat transfer in paper honeycomb structure

Natural convection characteristics of honeycomb fin with different hole cells for battery phase-change material cooling systems

Graded square honeycomb as sandwich core for enhanced mechanical performance

Thermal performance augmentation of honeycomb metal matrix embedded phase change material in shell-tube latent heat storage unit

A Pore Scale Study on Heat Transfer Characteristics of Integrated Thermal Protection Structures with Phase Change Material

Studies on the Effect of Shape-Stabilized PCM Filled Aluminum Honeycomb Composite Material on Thermal Control

Structure Design and Heat Transfer Performance Analysis of a Novel Composite Phase Change Active Cooling Channel Wall for Hypersonic Aircraft

Experimental and numerical analysis of a bolted reinforced honeycomb with tunable Poisson's ratio

Review and comparison of turbulent convective heat transfer in state-of-the-art 3D truss periodic cellular structures

A new heat resistant load bearing system incorporating honeycomb structured cementitious composite investigated via experiments and modelling

Effective heat conductivity of Honeycomb (porous) composite panel

Enhanced Mechanical Performance of Brazed Sandwich Panels with High Density Square Honeycomb-Corrugation Hybrid Cores

Performance Enhancement of Sandwich Panels with Honeycomb–corrugation Hybrid Core

Numerical study of heat transfer characteristics of phase change materials reinforced with porous media based on hybrid mesh

Compressive Mechanical Properties and Energy Absorption of Cubic Spherical Hollow Cellular Material Based on the Rod and Curved Surface Structure