Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The topology optimization is considered to enhance the strength, stiffness, and specific energy absorption of a quasi-honeycomb sandwich structure since it can achieve the optimal distribution of materials. However, the existing material interpolation models do not make the topology structure have good clarity and stability. In the present study, a novel variable-density topology optimization based on an improved interpolation model is developed for the design of a quasi-honeycomb core. The combined cells are circularly spreading outward from the geometric center of the design domain, and the wall thickness function of the equivalent cell (i.e. a simplified model of the combined cell) is established on the basis of relative density. The SR material interpolation model is modified by adding the minimum elastic modulus term, fitting the weighting and penalty factors, and adopting the volume constraint of Bi-directional Evolutionary Structural Optimization (BESO). The optimization is conducted to minimize the compliance of the quasi-honeycomb core, in which the relative densities of equivalent cells are chosen as the design variables due to the mapping between topology elements and equivalent cells. The three-dimensional (3D) geometric models of original and optimized quasi-honeycomb cores, upper face sheets, and lower face sheets are built using SolidWorks and printed on a 3D printer. The deflection, strain, bending stiffness, and energy absorption under different material retention rates, restraint positions, and face sheet thicknesses are investigated by three-point bending tests. It is found that the improved SR material interpolation model is efficient for suppressing the grid dependence and checkerboard, and the mechanical properties of optimized quasi-honeycomb sandwich structures are significantly enhanced in comparison with original structures, confirming that the developed method provides important guidance for designing and optimizing the quasi-honeycomb sandwich structure.

Enhanced Mechanical Performance of Brazed Sandwich Panels with High Density Square Honeycomb-Corrugation Hybrid Cores

Failure analysis of brazed sandwich structures with square honeycomb-corrugation hybrid cores under three-point bending

Effect of an S-shaped reinforced core on the compression properties of composite honeycomb sandwich panel and tube structures

All-composite honeycomb-enhanced corrugated hybrid structures to improve flexural responses

In-plane compressive response of composite sandwich panels with local-tight honeycomb cores

Fabrication, design, and optimization of hierarchical composite Kagome honeycomb sandwich structure under uniaxial compression

Mechanical behaviors and failure modes of sandwich cylinders with square honeycomb cores under axial compression

Meta-honeycomb sandwich tubes: Designing, manufacturing, and crashworthiness performance

Fabrication and compressive performance of novel lightweight C/SiC honeycomb for ultrahigh stability structures

Improved design of 3D printed star honeycomb pressure resistance and sandwich panel protective capability

High-velocity impact performance of sandwich panels with additively manufactured hierarchical honeycomb cores: An experimental and numerical study

Study on the bending and shear properties of quasi-honeycomb sandwich structures considering the variable-density core design

An investigation on the mechanical behaviour of sandwich composite structures with circular honeycomb bamboo core

Thermomechanical Collaborative Design and Experimental Verification of a Sandwich Structure with a Polyimide Foam Core

Evaluation of the influence of design in the mechanical properties of honeycomb cores used in composite panels

Crashworthiness and optimization of bionic sandwich cores under out-of-plane compression

Development of epoxy-based sandwich composite panel with hollow glass microspheres/clay hybrid core and banana fiber facesheet for structural applications

Effects of core geometry, silica nanoparticles, and polyurethane foam on the mechanical properties of a novel circular-shaped core sandwich panels under compression test: Experimental study

Compressive Strength and Energy Absorption of Sandwich Panels with Aluminum Foam-Filled Corrugated Cores

Variable-density topology optimization and bending test of quasi-honeycomb sandwich structures

Study on mechanical properties of multi-structure dactyl-inspired sandwich honeycomb with basalt fiber