Reaction Characteristics and MILD Combustion of Residual Char in a Pilot-Scale Furnace

Fan Hu,Pengfei Li,Tai Zhang,Wenhao Li,Kai Wang,Junjun Guo,Jianchun Mi,Zhaohui Liu

DOI: https://doi.org/10.1021/acs.energyfuels.9b02962

IF: 4.6541

2019-01-01

Energy & Fuels

Abstract:Residual char is an important product of the coal chemical industry, and the reasonable utilization of residual char is of great significance. This work systematically investigates the combustion characteristics of residual char by thermogravimetric analysis (TGA), fixed-bed reactor (FBR) basic experiments, and 300 kW pilot-scale experiments. The pilot-scale experiments cover the conventional swirl flame combustion and moderate or intense low-oxygen dilution (MILD) combustion. The TGA and FBR basic experiments show that, in comparison to the pulverized coal, the residual char has a higher ignition temperature and lower reaction rate, resulting in lower reactivity. The pilot-scale experiments display that the MILD combustion of residual char can be established even without preheating the secondary air. For the same combustion condition (swirl flame or MILD combustion), the NO emissions from burning residual char are lower than those of firing pulverized coal by approximately 50%, mainly as a result of the much lower amount of fuel N in the residual char. Moreover, the MILD combustion can further reduce the NO emissions of residual char by approximately 30% compared to the swirl combustion, and the burnout rate of the MILD combustion of residual char is about 93%. Increasing residence time, reducing particle size, or preheating secondary air appropriately can further improve the burnout rate. Considering the relatively low pollutant emissions and high burnout rate, the MILD combustion is the promising approach for the large-scale direct utilization of residual char.