Abstract:The quasi-rigid body model is the relationship model between the volume error and the geometric error of the CMM under the consideration of simple deformation. The quasi-rigid body model reflects the comprehensive influence of all geometric errors and ensures the calibration accuracy of geometric errors. However, the geometric error solution based on the quasi-rigid body model has the problem of multicollinearity. To solve this problem, in this study, the geometric errors of CMM are compensated using laser tracing multistation measurement technology and the LASSO (Least absolute shrinkage and selection operator, LASSO) algorithm. First, a laser tracing multi-station measurement model is established, and then the coordinates of the laser tracer station are obtained by solving the redundant equations provided by the laser tracer multi-station measurement system using the L-M (Levenberg Marquardt) algorithm. The global positioning system localization principle combined with the L-M algorithm is used to determine the actual position of the CMM measurement point. Then, the volume error is determined by calculating the difference between the actual position of the measurement point and the planned position. A mathematical model of the volumetric and geometric errors is obtained from the CMM quasi-rigid body model, and the LASSO algorithm is used to solve the model to obtain the 17 geometric errors of the CMM. Using the relationship between the volume error and the uniaxial geometric error, the 4 rotational errors are solved of εz (x), εx- (z), εv (z), εz (z). To verify the measurement accuracy of the compensated CMM, the compensation effect is verified by using the XL80 interferometer with the measuring block. The experimental results indicate that when error compensation is performed, the measurement accuracy of the CMM is improved by >50% compared to the initial state, and no mechanical processing is involved.

Volumetric Error Measurement and Compensation of Three-Axis Machine Tools Based on Laser Bidirectional Sequential Step Diagonal Measuring Method

Volumetric error modeling and decoupled error compensation analysis of five-axis CNC machine tools

Volumetric error identification for CNC machine tool based on multi-body system and vector diagonal measurement

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

Simultaneous Measuring Method Of Linear Guide Geometric Errors In Four-Degrees Of Freedom

Mathematic Model of Simultaneously Measuring Six-dimensional Parameters by Laser

A method of geometric error identification and compensation of CNC machine tools based on volumetric diagonal error measurements

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Modeling and Compensation of Volumetric Errors for a Six-Axis Automated Fiber Placement Machine Based on Screw Theory

Implementation and Verification of a Four-Probe Motion Error Measurement System for a Large-Scale Roll Lathe Used in Hybrid Manufacturing

Measurement and compensation for volumetric positioning errors of CNC machine tools considering thermal effect

A Volumetric Positioning Error Compensation Method for Five-Axis Machine Tools

Calibration and Compensation of Machine Tool Volumetric Error Using a Laser Tracker

Measurement method for volumetric error of five-axis machine tool considering measurement point distribution and adaptive identification process

Fast Detection of Geometric Errors for Three-Axis Machine Tools with Combined Double-Ball Bars Based on Spatial Circle Detection

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

A systemic approach to identify the volumetric and dynamic errors for five-axis machine tools with double ball-bar test

A New Error Measurement Method to Identify All Six Error Parameters of A Rotational Axis of A Machine Tool

Full-scale Measurement of CNC Machine Tools

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

LASSO based compensation method for geometric errors of large coordinate measuring machine