Abstract:Recently, aluminum–air batteries have attracted great interest owing to their high output energy density, low cost, and feasibility to store and transport Al metal. However, the commercial application is still hindered by the lack of a high-performance air cathode, where the oxygen reduction reaction (ORR) happens, requiring fast charge transfer and mass transport at the catalyst–electrolyte–air interface. Herein, we report an aerophilic air cathode featuring both high intrinsic catalytic activity and large three-phase interface to facilitate air transport, which is prepared by growing cobalt-embedded and nitrogen-doped carbon nanotube (CoNCNT) arrays on carbon fiber paper and then modifying surface wettability with polytetrafluoroethylene solution. The optimized air electrode during the ORR shows a high onset potential of 0.95 V and fast current increase of 342.96 mA cm<sup>–2</sup> V<sup>–1</sup>, which is comparable to the commercial 20 wt % Pt/C, and has even better stability under the same conditions. Moreover, the aluminum–air battery with the aerophilic air electrode is superior to the battery with a commercial Pt/C electrode or aerophobic electrode in terms of maximum power density and long discharging durability. Bubble behavior measurement shows that aerobic wettability plays an important role in gas transport, thus controlling ORR efficiency of the air electrode. The concept of the gas-wettable electrode proves to be effective in the enhancement of oxygen reduction kinetics and would be also adapted in other gas-involved electrodes for energy-related applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00837?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00837</a>.Elemental mapping images and C 1s XPS spectrum of CoNCNTs/CP; basic bubble contact angle results on different PTFE-modified CoNCNTs/CP; ORR polarization curves under different conditions and K-L plots of 0.8-CoNCNTs, Pt/C and CoNCNTs; CV curves at different scan rates of 0.8-CoNCNTs/CP, Pt/C, and CoNCNTs/CP; electrolyte droplet contact angles on 0.8-CoNCNTs/CP after the long-term reaction; optical pictures of the self-assembled Al–air battery; possible application demonstration; and table of relative atomic contents in CoNCNTs/CP (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00837/suppl_file/am1c00837_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Nitrogen and Cobalt Co-Coped Carbon Materials Derived from Biomass Chitin As High-Performance Electrocatalyst for Aluminum-Air Batteries

Synthesis of Cobalt-Anchored N-doped Carbon As an Oxygen Reduction Reaction Catalyst for Aluminum-Air Batteries

Space-confined Synthesis of CoNi Nanoalloy in N-doped Porous Carbon Frameworks As Efficient Oxygen Reduction Catalyst for Neutral and Alkaline Aluminum-Air Batteries

Hierarchical Porous Manganese- and Nitrogen-Codoped Carbon Nanosheets Derived from Surface Modified Biomass as Efficient Oxygen Reduction Catalysts for Al-Air Batteries

FeCo nanoparticles wrapped in N-doped carbon derived from Prussian blue analogue and dicyandiamide as efficient oxygen reduction electrocatalysts for Al-air batteries

Interface Engineering of Co3Fe7-Fe3C Heterostructure As an Efficient Oxygen Reduction Reaction Electrocatalyst for Aluminum-Air Batteries

Aerophilic Co-Embedded N-Doped Carbon Nanotube Arrays as Highly Efficient Cathodes for Aluminum–Air Batteries

Co5.47N Loaded N-doped Carbon As an Efficient Bifunctional Oxygen Electrocatalyst for a Zn-air Battery.

Cobalt Nanoparticles Encapsulated in Nitrogen-Doped Carbon Nanotube as Bifunctional-Catalyst for Rechargeable Zn-Air Batteries

Ultrathin Co3O4 Nanosheet Clusters Anchored on Nitrogen Doped Carbon Nanotubes/3d Graphene As Binder-Free Cathodes for Al-air Battery

Preparation of Co–N Carbon Nanosheet Oxygen Electrode Catalyst by Controlled Crystallization of Cobalt Salt Precursors for All-Solid-state Al–air Battery

Controllable Synthesis of Co@CoOx/Helical Nitrogen-Doped Carbon Nanotubes Toward Oxygen Reduction Reaction As Binder-free Cathodes for Al-Air Batteries

Advanced Hollow Cubic FeCo-N-C Cathode Electrocatalyst for Ultrahigh-Power Aluminum-Air Battery

High-efficiency oxygen electrocatalyst for Zn-air batteries on CoMn alloy encapsulated in N-doped carbon architectures

Design of Fe and Cu bimetallic integration on Nitrogen-containing microporous graphene-like carbon via a hard-template-assisted strategy as an oxygen reduction catalyst for Al-air batteries

Alloying Co Species into Ordered and Interconnected Macroporous Carbon Polyhedra for Efficient Oxygen Reduction Reaction in Rechargeable Zinc–Air Batteries

High-performance rechargeable zinc-air batteries enabled by cobalt iron anchored on nitrogen-doped carbon matrix as bifunctional electrocatalyst

Cobalt oxide nanosheets anchored on loofah sponge-derived carbon as a high-performance bifunctional electrocatalyst for rechargeable zinc-air batteries

Enhanced Electronic Interaction Between Iron Phthalocyanine and Cobalt Single Atoms Promoting Oxygen Reduction in Alkaline and Neutral Aluminum-Air Batteries

Metal–Organic-Framework-Derived Nitrogen-Doped Carbon-Matrix-Encapsulating Co0.5Ni0.5 Alloy as a Bifunctional Oxygen Electrocatalyst for Zinc–Air Batteries

Plasma-Assisted Synthesis of Defect-Rich O and N Codoped Carbon Nanofibers Loaded with Manganese Oxides as an Efficient Oxygen Reduction Electrocatalyst for Aluminum–Air Batteries