Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Buckling Analyses of Spherical Shells by the Finite Element Method Based on the Willis-Form Equations

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Isogeometric Method for Buckling Prediction and Post-Buckling Analysis of Variable Stiffness Composite Underwater Pressure Shell

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Dynamic Buckling of Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation under Time Dependent External Pressure

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Analytical Research on Dynamic Buckling of Thin Cylindrical Shells with Thickness Variation under Axial Pressure

Buckling of Cylindrical Shells with Measured Settlement under Axial Compression

Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure

Numerical Simulation on Buckling of Combined Multilayered Unequal-Thickness Cylindrical Shell

Buckling analyses of cylindrical shells with axial variable elastic modulus under external pressure

Experimental and Numerical Investigations on Buckling Behaviours of Axially Compressed Cylindrical–conical–cylindrical Shells at Elevated Temperature

Influence of Initial Imperfections on Ultimate Strength of Spherical Shells

Analytical Study On the Buckling of Cylindrical Shells with Circumferential Thickness Variation Under Varying External Pressure

A Method for Solving the Buckling Problem of a Thin-Walled Shell

Buckling Critical Load Calculation and Analysis of Axially Impacted Cylindrical Shells Embedded in Elastic Media