Abstract:Ultrasonic guided-wave (UGW) NDT technology is an efficient means for damage identification and has been applied widely in the field of detection for pipelines, railway tracks, ships and aircrafts. Besides, the dispersion curves of the guided waves in a square steel pipe are indispensable references for the integrity test of continuous structural components, which represent the frequency dependence of guided wave velocities. Unfortunately, the complete dispersion curve of ultrasonic waves in square steel pipes cannot be solved by the traditional finite element modal analysis method. To address the problem, the semi-analytical finite element (SAFE) method was used to obtain the ultrasonic guided wave dispersion curves in a square steel pipe, on this basis, a UGW-based NDT strategy is proposed. Firstly, triangular elements are adopted to perform the finite element discretization on the cross-section of the square steel pipe, and the guided wave is assumed to be in a harmonic motion along the wave propagation direction. Then, the wave equation of the ultrasonic guided waves propagating in the square steel pipe is deduced theoretically, through solving the characteristic equation, the wave number and frequency can be obtained, and the relation between the frequency and phase velocity & group velocity is obtained; thus, the dispersion curves can be plotted, which can be used to analyze the vibration characteristics of the guided wave modes. Afterwards, the optimal excitation frequency, excitation direction and excitation location are selected based on dispersion property for the different damage modes of the square steel pipe. Lastly, the proposed damage identification method is validated through numerical simulation. The results show that the dispersion curves of square steel pipe solved with the semi-analytical finite element method are in good agreement with the simulated result, besides, for the damage on the square steel pipe surface, the reflected guided wave package can identify the damage location effectively under the selected excitation.

Bend Detection of Pipe Using Guided Waves

Guided wave-based bend detection in pipes using in-plane shear piezoelectric wafers

Ultrasonic Guided Wave Approach Incorporating SAFE for Detecting Wire Breakage in Bridge Cable

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

Scattering of Torsional Flexural Guided Waves from Circular Holes and Crack-Like Defects in Hollow Cylinders

Non-destructive Evaluation of Spiral-welded Pipes Using Flexural Guided Waves

Defects Detection in Typical Positions of Bend Pipes Using Low-Frequency Ultrasonic Guided Wave

Fluid Pipe Nondestructive Testing Based on Ultrasonic Guided Waves

Location Detection and Numerical Simulation of Guided Wave Defects in Steel Pipes

The investigation of guided wave propagation around a pipe bend using an analytical modeling approach

Detection and Identification of Dents in Pipelines Using Guided Waves

ULTRASONIC GUIDED WAVES NONDESTRUCTIVE DAMAGE DETECTION FOR SQUARE STEEL PIPE BASED ON SEMI-ANALYTICAL FINITE ELEMENT METHOD

Experimental Investigation of Deformation Damage Detection in Pipes Using Ultrasonic Guided Waves

Guided Waves Based Diagnostic Imaging of Circumferential Cracks in Small-Diameter Pipe.

Study on simulation of non-destructive testing for pipeline defects by ultrasonic guided waves

Damage Identification of Pipeline Based on Ultrasonic Guided Wave and Wavelet Denoising

Damage Assessment in L-shaped Bends by Nonlinear Feature Guided Waves

The Reflection of Guided Waves from Simple Dents in Pipes.

Data-Driven Damage Classification Using Guided Waves in Pipe Structures

Magnetostrictive Guided Wave Flaw Detection System for Pipeline

Guided Wave Propagation Based Damage Detection in Welded Rectangular Tubular Structures