Abstract:Passive vibration isolation techniques with low-frequency characteristics have been a hot topic in the aerospace field. A hydraulic inertial vibration isolator is a highly effective type of isolator for controlling low-frequency vibrations. It typically consists of a main spring, a minor spring, an inertial mass, and a fluid domain. Due to its multi-domain nature, analyzing the isolation mechanism of this type of isolator is challenging. The bond graph method is employed to establish the dynamic model of the isolator. Subsequently, the state equations of the isolator are derived, and the energy equations of both the mechanical and the fluid parts of the isolator are obtained. Based on this, the energy transfer characteristics between the mechanical and fluid domains inside the isolator under external excitation are discussed. The time-domain response of the forces transmitted to the foundation is analyzed. It is shown that the anti-resonance frequency occurs when the forces transmitted to the foundation generated by the main spring and the fluid pressure are equal to that of the minor spring. To verify the proposed method's correctness, a prototype of the isolator is designed and a carefully designed experiment is conducted. The acceleration transmissibility of the isolator is used to conduct a comparative study. The results show that the theoretical results are in good agreement with the experimental results. To depict the dynamic characteristics of the isolator under large amplitude vibration, the nonlinear dynamic model of the isolator is developed, and the corresponding force transmissibility of the isolator is formulated. The energy flow between the mechanical and the fluid domains under this condition is also analyzed. The results indicate that the energy flow responses exhibit a similar change tendency to the force transmissibility. However, the peak of the energy ratio between the mechanical subsystem and the fluid is the same as the linear condition, suggesting that this value is determined by the amplification ratio of the isolator. This research provides enhanced physical insight to understand the dynamic characteristics of this type of isolator and will help to shorten the design cycle of the isolator.

Dynamic Mass Isolation for Improving the Moving Efficiency of an Impact Drive Mechanism

Dynamic Mass Isolation Method Utilized in Self-Moving Precision Positioning Stage for Improved Speed Performance.

Experiment on Active Vibration Isolation of a Conical Shell Isolator

Comparison of the Dynamic Performance of Nonlinear One and Two Degree-Of-Freedom Vibration Isolators with Quasi-Zero Stiffness

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Analysis and Experimental Study on Dynamic Characteristics of an Integrated Quasi-Zero Stiffness Isolator

A novel high-static-low-dynamic-stiffness isolator with sliding mass: modeling and analysis

Dynamic Isotropy Design and Analysis of a Six-Dof Active Micro-Vibration Isolation Manipulator on Satellites

Modeling and Analysis of a Multi-Dimensional Vibration Isolator Based on the Parallel Mechanism

A Novel Framework of Lightweight Optimization Design of a Prototype Wafer Stage With Control Verification

Developing experimental technology and numerical analysis model for non-linear behaviour of Bi-tilt isolator

Dynamic modeling and control for a five-dimensional hybrid vibration isolator based on a position/orientation decoupled parallel mechanism

Modelling and optimisation of a five dimensional vibration isolator

Active Control of Quasi-Zero-Stiffness Vibration Isolator with Variable Load

Dynamic response characteristics of an E-type impact isolation structure with a free mass constraint

Study on Modeling and Dynamic Performance of a Planar Flexible Parallel Manipulator Based on Finite Element Method

The Bond Graph Modeling and Experimental Verification of a Hydraulic Inertial Vibration Isolator Including Nonlinear Effects

Optimal Design and Performance Evaluation of Lightweight Inerter Systems (LwIS) for Seismic Response Mitigation

Parameter Optimization and Application for the Inerter-Based Tuned Type Dynamic Vibration Absorbers

Semi-Active Control for A Multi-Dimensional Vibration Isolator with Parallel Mechanism

Electronic Inertia Design for In-Wheel-drive System to Improve Off-Road Dynamic Performance