Abstract:Hydraulic fracturing is widely used to stimulate unconventional reservoirs, but a systematic and comprehensive investigation into the hydraulic fracturing process is insufficient. In this work, a discrete element-lattice Boltzmann method is implemented to simulate the hydro-mechanical behavior in a hydraulic fracturing process. Different influential factors, including treatment parameters (injection rates and fluid viscosity), formation parameters (in situ stress states and natural fractures) and rock properties (heterogeneity of rock strengths and rock permeability), are considered and their impacts on the initiation and propagation of hydraulic fractures are evaluated. A higher injection rate, increased viscosity, and larger in situ stress will lead to an increase in the initiation pressure. Conversely, higher formation permeability and a greater degree of heterogeneity in bond strengths will result in a decrease in the initiation pressure. The complexity of generated fractures is significantly influenced by the injection rate and degree of heterogeneity. However, fluid viscosity, in situ stress states, and formation permeability individually do not affect the geometrical complexity. Shear displacement can occur during a hydraulic fracturing process due to increased pore pressure and variations in in situ stress caused by injected fluid. Low-viscosity fluid with a high injection rate can have a significant pressure buildup and generate complex fracture networks in low-permeability heterogeneous formations. Natural fractures can significantly impact the complexity of generated fractures, while more in-depth research is required regarding complex natural fracture distributions. Hydraulic fracturing technique is essential for the development of unconventional reserves, such as shale gas/oil and geothermal reservoirs. To optimize field operations and properly estimate the stimulation reservoir volume, it is necessary to investigate the impact of influential factors. In this work, we adopt a numerical scheme (DEM-LBM) to investigate the process in detail and consider as many factors as possible, including treatment parameters (injection rates and fluid viscosity), formation parameters (in situ stress states and preexisting natural fractures), and rock properties (heterogeneity of rock strengths and rock permeability). The impacts of those influential factors on the initiation and propagation of hydraulic fractures are evaluated. We find that all factors have a significant impact on fracture initiation pressure. However, the complexity of generated fractures is mainly affected by injection rates and heterogeneity degrees of rock strengths. The combination of low-viscosity fluid and a high injection rate can result in the generation of a much more complex fracture network in a low-permeability heterogeneous formation. The existence of natural fractures can significantly influence the complexity of the generated fracture networks. Further research on natural fracture networks is feasible based on the foundation established in this work. Different influential factors have significant impacts on the initiation pressureExistence of natural fractures, high injection rates and heterogeneity degrees increase the geometrical complexity of fracturesLow-viscosity fluid combined with a high injection rate leads to a complex fracture network in low-permeability heterogeneous formation

Numerical Investigation on the Hydraulic Fracture Propagation Based on Combined Finite-Discrete Element Method

Numerical Simulation of Hydraulic Fracturing Based on Discrete Element Method

Numerical simulation study of fracture height growth considering the influence of bedding planes

Study on the induced effect of bedding weakness in deep shale gas reservoir on hydraulic fractures propagation

Numerical Investigation of Influential Factors in Hydraulic Fracturing Processes Using Coupled Discrete Element-Lattice Boltzmann Method

Numerical Simulation of Hydraulic Fracture Propagation in Unconsolidated Sandstone Reservoirs

Numerical Simulation of Hydraulic Fracture Propagation on Multilayered Formation Using Limited Entry Fracturing Technique

Numerical Analysis for Dynamic Propagation and Intersection of Hydraulic Fractures and Pre-existing Natural Fractures Involving the Sensitivity Factors: Orientation, Spacing, Length, and Persistence

Numerical Investigation of Influence of In-Situ Stress Ratio, Injection Rate and Fluid Viscosity on Hydraulic Fracture Propagation Using a Distinct Element Approach

Interference Behaviour between Bedding Planes and Hydraulic Fractures and Its Influence on the Complex Fracture Network in Shale

Numerical study of hydraulic fractures propagation in deep fracture-cavity reservoir based on continuous damage theory

Numerical Study of Simultaneous Growth of Multiple Hydraulic Fractures from a Horizontal Wellbore Combining Dual Boundary Element Method and Finite Volume Method

Numerical Analysis on the Formation of Fracture Network during the Hydraulic Fracturing of Shale with Pre-Existing Fractures

Study on the Interaction Mechanism of Hydraulic Fracture and Natural Fracture in Shale Formation

Characterizing the Hydraulic Fracture Propagation Behavior in Deep Fractured Formations Based on DDM and FVM

Study on Interaction Between Induced and Natural Fractures by Extended Finite Element Method

Numerical and experimental investigation of the interaction of natural and propagated hydraulic fracture

Numerical Simulation of the Simultaneous Development of Multiple Fractures in Horizontal Wells Based on the Extended Finite Element Method

Physical Simulation Experiments of Hydraulic Fracture Initiation and Propagation under the Influence of Deep Shale Natural Fractures

Effects of Geo-Stress and Natural Fracture Strength on Hydraulic Fracture Propagation in a Deep Fractured Tight Sandstone Reservoir