Abstract:Among various energy storage/conversion systems, lithium-sulfur batteries are considered as one of the most promising candidate due to not only very high theoretical energy density of 2600 Wh kg-1 (based on lithium-sulfur redox couple) and wide operating temperature range benefiting from its unique multiple-electron-transfer chemistry, but also abundant reserves and environmental friendliness of sulfur. However, several intrinsic obstacles should be overcome for its applicably extension, including the ultra-low electrical conductivity of sulfur and its lithiated products, huge volumetric changes during charge and discharge, and the shuttling mechanism of soluble intermediate polysulfides. Here, a hierarchical nanostructured carbon/sulfur hybrid in which the porous carbon was in situ integrated into graphene/single-walled carbon nanotube (SWCNT) hybrid matrix with small cyclo-S8 molecule clusters was fabricated as advanced cathode material for lithium-sulfur battery application. The sp2 graphene/SWCNT hybrid interlinked framework was served as robust conductive scaffold with good electrical conductivity and structure stability, while the micro-/mesoporous carbon accommodated sulfur and lithium polysulfides, provided accessibility for liquid electrolyte to active material, and suppress the shuttle behavior due to the spacial confinement. Therefore, such hierarchical all-carbon nanostructure hybridized with small cyclo-S8 molecule clusters obtained an excellent electrochemical performance including an ultrahigh specific capacity of 1121 mAh g-1 at 0.5 C, a favorable high-rate capability of 809 mAh g-1 at 10 C, a very low capacity decay of 0.12 % per cycle, and an impressive cycling stability of 877 mAh g-1 after 150 cycles at 1 C. As sulfur loading increasing from 50 wt % to 77 wt %, high capacities of 970, 914, and 613 mAh g-1 were still available at current densities of 0.5, 1, and 5 C respectively. Based on the total mass of packaged devices, gravimetric energy density of GSH@APC-S//Li cell was expected to be 400 Wh kg-1 at a power density of 10000 W kg-1, matching the level of engine driven systems. Reference: [1] HJ Peng, et al. Adv. Funct. Mater., 2014, DOI: 10.1002/adfm.201303296

Hollow Germanium Nanocrystals on Reduced Graphene Oxide for Superior Stable Lithium-Ion Half Cell and Germanium (Lithiated)-Sulfur Battery

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Anchored Monodispersed Silicon and Sulfur Nanoparticles on Graphene for High-Performance Lithiated Silicon-Sulfur Battery

Topological Transformation of Hydrogen-Terminated Germanium to Germanium Nanosheets for Fast Lithium Storage

Germanium nanoparticles encapsulated in flexible carbon nanofibers as self-supported electrodes for high performance lithium-ion batteries.

Facile Synthesis of Germanium–reduced Graphene Oxide Composite As Anode for High Performance Lithium-Ion Batteries

Hierarchical Nanostructured Carbon/Sulfur Hybrid Cathode for High-Performance Lithium-Sulfur Battery

Nanoarchitectured Graphene/CNT@Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium‐Sulfur Batteries

Heterogeneous isomorphism hollow SiGe nanospheres with porous carbon reinforcing for superior electrochemical lithium storage

Dual-Phase Lithium Metal Anode Containing a Polysulfide-Induced Solid Electrolyte Interphase and Nanostructured Graphene Framework for Lithium-Sulfur Batteries.

The Design of a High-Energy Li-ion Battery Using Germanium-Based Anode and LiCoO2 Cathode

Germanium Nanowires via Molten-Salt Electrolysis for Lithium Battery Anode

Hierarchically Designed Germanium Microcubes with High Initial Coulombic Efficiency toward Highly Reversible Lithium Storage

Blackberry-like Hollow Graphene Spheres Synthesized by Spray Drying for High-Performance Lithium-Sulfur Batteries

Liquid-phase Exfoliated-Graphene-supporting Nanostructural Sulfur As High-Performance Lithium–sulfur Batteries Cathode

A Freestanding Hollow Carbon Nanosphere As Efficient Sulfur Hosts For High-Performance Lithium-Sulfur Batteries

Dense Graphene Monolith for High Volumetric Energy Density Li–S Batteries

Ionic Liquid Electrodeposition of Strain-Released Germanium Nanowires As Stable Anodes for Lithium Ion Batteries

Conductive Mesoporous Niobium Nitride Microspheres/Nitrogen-Doped Graphene Hybrid with Efficient Polysulfide Anchoring and Catalytic Conversion for High-Performance Lithium-Sulfur Batteries.

Enhanced charge capacity and stability of Germanium(IV) Sulfide-Based anodes through Triton X100-Assisted synthesis and polysulfide shuttle mitigation

A High‐energy‐density Long‐cycle Lithium–sulfur Battery Enabled by 3D Graphene Architecture