Abstract:The conventional graphite anode is still insufficient to meet the demand due to its low theoretical specific capacity(372 mAhg-1). Compared to the graphite, the high surface-to-volume ratio and open porous system of graphene shows great advantages:i) fast ion transport enabling the high rate capability, which is an obstacle for graphite with microsize bulk lithium diffusion; ii) the large surface areas of graphene can provide more electrochemical reaction active sites for energy storage. Meanwhile, Graphene is an excellent substrate to host active nanomaterial for energy applications due to its high conductivity, large surface area, structural flexibility, and chemical stability.1,2Overall, the superior electronic conductivity and mechanical properties of graphene make it suitable for fabrication into high-performance composites with other anode materials for LIBs. Recently, Alloy-type anodes (Si, Ge, Sn, Sb, etc.) have attracted much attention due to their higher Li storage capacity than the graphite anode that is currently used in Li-ion batteries. Compared with the silicon etc., Germanium has high theoretical capacity (1384 mAh/g), good lithium diffusivity (400 times faster than in silicon), and high electrical conductivity (104 times higher than silicon).3 However, the practical usage of Ge as an anode material is hindered by dramatic volume changes (∼300%) caused by insertion/extraction of lithium ions, which results in crack and pulverization, and loss of electrode contact.4 Herein, we developed a facile synthesis method (solution-phase reactions) to form hybrid materials of amorphous hierarchical porous GeOx whose primary particles are 3∼7 nm diameter anchored on reduced grapheme oxide (RGO) sheets for lithium ion battery applications. The high rate performance of mesoporous GeOx/RGO composite is attributed to (1) the amorphous hierarchical porous GeOx whose primary particles are 3∼7 nm diameter anchored on conducting RGO stabilize the cycling performance and rate capability; (2)fast charge transfer reaction at the large interfacial area of RGO between hybrid electrode and liquid electrolyte. Acknowledgements This work is supported by the Project of the Ningbo 3315 International Team of Advanced Energy Storage Materials, China Postdoctoral Science Foundation funded project. References: Yoo, E., et al.Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries. Nano Letters. 2008.8(8): 2277-2282. Xiang, H. F., et al. Graphene sheets as anode materials for Li-ion batteries: preparation, structure, electrochemical properties and mechanism for lithium storage.Rsc Advances 2012. 2(17): 6792-6799. Wang, X. L., et al. Amorphous Hierarchical Porous GeOx as High-Capacity Anodes for Li Ion Batteries with Very Long Cycling Life. Journal of the American Chemical Society 2011. 133(51): 20692-20695 Yuan, F. W., et al. Alkanethiol-Passivated Ge Nanowires as High-Performance Anode Materials for Lithium-Ion Batteries: The Role of Chemical Surface Functionalization. Acs Nano 2012. 6(11): 9932-9942.

Facile Synthesis of Germanium–reduced Graphene Oxide Composite As Anode for High Performance Lithium-Ion Batteries

Facile Scalable Synthesis Of Carbon-Coated Ge@C And Gex@C (X=S, Se) Anodes For High Performance Lithium-Ion Batteries

Facile Synthesis of Porous Germanium-Iron Bimetal Oxide Nanowires As Anode Materials for Lithium-Ion Batteries

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Amorphous Hierarchical Porous GeO X /reduced Graphene Oxide Composite As a High-Performance Anode Material for Lithium Ion Batteries

Germanium nanoparticles encapsulated in flexible carbon nanofibers as self-supported electrodes for high performance lithium-ion batteries.

In Situ Reaction Synthesis of GeO2/RGO Nanocomposite for High Performance Lithium Storage

Ge nanoparticles uniformly immobilized on 3D interconnected porous graphene frameworks as anodes for high-performance lithium-ion batteries

Efficient preparation of uniform germanane nanosheets as anode with high-cycling stability in lithium-ion batteries

Self-assembled GeOX/Ti3C2TX Composites As Promising Anode Materials for Lithium Ion Batteries

GeO2 Nanoparticles Decorated in Amorphous Carbon Nanofiber Framework as Highly Reversible Lithium Storage Anode

In Situ Grown Graphene-Encapsulated Germanium Nanowires for Superior Lithium-Ion Storage Properties

Nitrogen-rich three-dimensional porous carbon mosaicked Na4Ge9O20 as anode material for high-performance lithium-ion batteries

Binder-Free Germanium Nanoparticle decorated Multi-Wall Carbon Nanotube Anodes prepared via two-step Electrophoretic Deposition for high capacity Li-Ion Batteries

In Situ One-Step Synthesis of a Ge/Zn2GeO4/N-Doped Carbon Composite As an Anode Material for Lithium-Ion Batteries

Topological Transformation of Hydrogen-Terminated Germanium to Germanium Nanosheets for Fast Lithium Storage

Amorphous Germanium Nanomaterials as High‐Performance Anode for Lithium and Sodium‐Ion Batteries

Influence of Carbon Matrix Dimensions on the Electrochemical Performance of Germanium Oxide in Lithium-Ion Batteries

Pyramid-Patterned Germanium Composite Film Anode for Rechargeable Lithium-Ion Batteries Prepared Using a One-Step Physical Method

High Conductivity Cu 3 Ge and High-Capacity GeO 2 Synergistically Enhance a Continuous Channel Ge-Based Anode for Lithium-Ion Batteries with Long-Life and Scalable Preparation

Zinc‐Triazolate Metal‐Organic Framework Assisted Synthesis of Germanium Nanoparticles Encapsulated in Nitrogen‐Doped Carbon as Anode Materials for Lithium‐Ion Batteries