Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Continuous additive manufacturing of hemp yarn-reinforced biocomposites with improved impregnation method

Hemp hurd filled PLA‐PBAT blend biocomposites compatible with additive manufacturing processes: Fabrication, rheology, and material property investigations

Damage and fracture studies of continuous flax fiber-reinforced composites 3D printed by in-nozzle impregnation additive manufacturing

Polylactide Composites Reinforced with Pre-Impregnated Natural Fibre and Continuous Cellulose Yarns for 3D Printing Applications

Hydroxyapatite functionalized natural fiber‐reinforced composites: Interfacial modification and additive manufacturing

3D printing of polypropylene reinforced with hemp fibers: Mechanical, water absorption and morphological properties

Process optimization of continuous flax fiber/polylactic acid prepreg filaments toward high performance 3D‐printed composites

Advancing additive manufacturing: 3D‐printing of hybrid natural fiber sandwich (Nona/Soy‐PLA) composites through filament extrusion and its effect on thermomechanical properties

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Toward the Manufacturing of a Non-Toxic High-Performance Biobased Epoxy–Hemp Fibre Composite

3D‐printing continuous plant fiber/polylactic acid composites with lightweight and high strength

Hybrid yarn structures as a promising approach for thermoplastic biocomposites

Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer

Characterization and Scalable Production of Industrial Hemp Fiber Filled PLA Bio-Composites

Preparation of hemp‐based biocomposites and their potential industrial application

Mechanical property characterizations of woven natural fiber-reinforced polymers 3D printed through a laminated object manufacturing process

Evaluation of Eco-Friendly Hemp-Fiber-Reinforced Recycled HDPE Composites

The Influence of Chemically Treated Hemp Fibre on the Mechanical Behavior and Thermal Properties of Polylactic Acid Made with FDM

Performance of Hybrid Composites Fabricated by Flax/Hemp Fibers Using Wire Mesh Plain Weaving Techniques

Determining the mechanical properties of biomaterial-based economic thermoplastic composites reinforced with hemp fibres

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites