Abstract:Preparation of hemp hurd‐based biomaterials and characterization of their structural, morphological, mechanical and thermal properties. Biocomposites are an emerging field in plastic industry. The incorporation of agri‐food waste in conventional or biobased polymer matrices allows the industry to lessen its carbon footprint, while producing recyclable plastic products. In this work, hemp hurd, a byproduct of hemp fiber production process, was used as a filler to prepare novel compostable composites in two different loadings (22% and 32% w/w respectively). Waste hemp hurds were selected due to their abundance and the lack of derived high‐value products. Three different polymers were used, namely poly[(tetramethyleneadipate)‐co‐(tetramethyleneterephthalate)] (PBAT) and poly(tetramethylene succinate) (PBS) as compostable polymers and a polyethylene elastomer for comparison. The bare polymers and prepared blends were then characterized for their structure and morphology by XRD and FESEM, as well as for their wettability, thermal and mechanical properties (namely energy absorbed on impact and flexural modulus). Structural and morphological characterization unveiled the different interactions occurring between hemp and the polymer matrices, suggesting the major impact of the type of used polymer when compared with biomass loading percentages. Mechanical tests showed that both PBAT and PBS blends properties are comparable to those of the pure polymers (i.e., in the case of PBAT the flexural modulus of the pure polymer was 82.2 MPa while the hemp‐loaded blends stood at around 50 MPa, whereas all PBS polymers and blends were 220 MPa, with no statistical difference between samples). These biomaterials have also similar thermal properties with respect to the bare polymers, underlining the promising potential as sustainable alternative to pure polymers. Highlights Waste hemp hurds were used to load biodegradable polymers at different percentages. Hemp hurd‐based biomaterials with excellent properties were prepared. Polymer flexural behavior was maintained even after hemp addition. Polymer‐hemp interactions for each polymeric matrix were elucidated. Hemp substitutes up to 32% w/w of polymer without affecting its properties.

Characterization and Scalable Production of Industrial Hemp Fiber Filled PLA Bio-Composites

Hemp hurd filled PLA‐PBAT blend biocomposites compatible with additive manufacturing processes: Fabrication, rheology, and material property investigations

Tensile Strength of Poly(Lactic Acid)/Bleached Short Hemp Fiber Fully Green Composites as Replacement for Polypropylene/Glass Fiber

Mechanical Properties and Microstructure of Hemp Hurd Reinforced Polylactide Biocomposites for 3D Printing

Preparation of hemp‐based biocomposites and their potential industrial application

PLA Composites Reinforced with Flax and Jute Fibers—A Review of Recent Trends, Processing Parameters and Mechanical Properties

Effect of steam explosion and silanization of hemp fibers on polylactic acid biocomposites; analysis of mechanical-thermal properties and fungal biodegradation

Mechanical Performances Analysis and Prediction of Short Plant Fiber-Reinforced PLA Composites

Tribological Properties of Hemp Fiber Reinforced Polylactic Acid Bio-Composites: Effect of Different Types of Modification Methods

Development and Properties of Bio-Based Polymer Composites Using PLA and Untreated Agro-Industrial Residues

Fabrication of outstanding mechanical performance engineered poly (lactic acid)/thermoplastic poly(ester)urethane in-situ nanofiber composites with a large-scale industrial innovation methodology

Evaluation of Eco-Friendly Hemp-Fiber-Reinforced Recycled HDPE Composites

Valorization of Agro-Wastes as Fillers in PLA-Based Biocomposites for Increasing Sustainability in Fused Deposition Modeling Additive Manufacturing

Exploring biofiber properties and their influence on biocomposite tensile properties

Preparation and characterization of bio-based green renewable composites from poly(lactic acid) reinforced with corn stover

Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications

Polylactide-based renewable green composites from agricultural residues and their hybrids

Utilizing the Potential of Waste Hemp Reinforcement: Investigating Mechanical and Thermal Properties of Polypropylene and Polylactic Acid Biocomposites

Development and characterization of eco-friendly extruded green composites using PLA/wood dust fillers

Sustainable packaging biocomposites from polylactic acid and wheat straw: Enhanced physical performance by solid state shear milling process

Application of Natural (Plant) Fibers Particularly Hemp Fiber as Reinforcement in Hybrid Polymer Composites - Part I. Origin of Hemp and Its Coming into Prominence, Cultivation Statistics, and Legal Regulations