Abstract:Tandem solar cells are one of the fastest‐growing PV technology, since, it efficiently overcomes the thermalization and non‐absorption losses. However, appropriate absorber materials with suitable bandgaps are required to design an efficient tandem solar cell. In this context, the present research paper brings forth the results of simulation‐based studies carried out on thin‐film/CQD based 2‐T monolithic tandem solar cell that can be processed easily at a reduced cost. The device has been designed using a‐Si: H of wide bandgap (1.7eV) as top cell and PbS CQD of narrow bandgap (1.2eV) as the bottom cell. The feasibility of the proposed design is investigated in two steps. Initially, top and bottom subcell are designed and calibrated to have state of the art conversion efficiency of 6.86% and 9.38%, respectively in accordance with the previous literature. Afterwards, the bottom cell is inverted to get the desired direction of electron flow in accordance with the top cell. The thickness of the inverted bottom cell has been optimized as 200 nm so as to obtain 8.34% efficiency. Standalone condition reflected JSC and VOC of 9.97 mA.cm−2 and 0.91 V in top cell, and 21.28 mA.cm−2 and 0.63 V in the bottom cell. Further, both the top and bottom subcells are evaluated for tandem configuration with the help of ITO based interlayer to provide the current matching conditions. In the proposed tandem design, the thickness of the absorber layers is optimized to achieve the highest JSC, which is indeed limited by the top cell owing to lower JSC value of 10.61 mA.cm−2 in standalone condition. Optimized tandem design with 200 nm/150 nm thick absorber layer based top/bottom subcell resulted in JSC of 10.52 mA.cm−2, VOC of 1.59 V, FF of 71.65% and PCE of 12.02%.This article is protected by copyright. All rights reserved.

PbS quantum dot tandem solar cell based on solution-processed nanoparticle intermediate layer.

Si Solid-State Quantum Dot-Based Materials for Tandem Solar Cells.

Perovskite/Colloidal Quantum Dot Tandem Solar Cells: Theoretical Modeling and Monolithic Structure

Efficient PbS Quantum Dots Tandem Solar Cells Through Compatible Interconnection Layer

Stable and Highly Efficient PbS Quantum Dot Tandem Solar Cells Employing a Rationally Designed Recombination Layer

Colloidal Quantum Dot Tandem Solar Cells Using CVD Graphene as An Atomically Thin Intermediate Recombination Layer

Interfacial Heterojunction Enables High Efficient PbS Quantum Dot Solar Cells

Realizing Solution-Processed Monolithic PbS QDs/perovskite Tandem Solar Cells with High UV Stability

Hybrid Tandem Quantum Dot/organic Photovoltaic Cells with Complementary Near Infrared Absorption.

Design and Simulation of a‐Si:H/PbS Colloidal Quantum Dots Monolithic Tandem Solar Cell for 12% Efficiency

Hybrid tandem solar cells with depleted-heterojunction quantum dot and polymer bulk heterojunction subcells

Ambient Stable and Efficient Monolithic Tandem Perovskite/PbS Quantum Dots Solar Cells via Surface Passivation and Light Management Strategies

PbS/Cd₃P₂ quantum heterojunction colloidal quantum dot solar cells.

Tandem Solar Cells Based on Quantum Dots

Over 15% Efficiency PbS Quantum‐Dot Solar Cells by Synergistic Effects of Three Interface Engineering: Reducing Nonradiative Recombination and Balancing Charge Carrier Extraction

Efficient Top-Illuminated Organic-Quantum Dots Hybrid Tandem Solar Cells with Complementary Absorption

Synergistic Effect of Electron Transport Layer and Colloidal Quantum Dot Solid Enable PbSe Quantum Dot Solar Cell Achieving over 10 % Efficiency

Tandem Colloidal Quantum Dot Solar Cells Employing a Graded Recombination Layer

Monolithic Two-Terminal Tandem Solar Cells Using Sb 2 S 3 and Solution-Processed PbS Quantum Dots Achieving an Open-Circuit Potential beyond 1.1 V

Efficient and Stable PbS Quantum Dot Solar Cells by Triple-Cation Perovskite Passivation

Four-Terminal Tandem Solar Cell with Dye-Sensitized and PbS Colloidal Quantum-Dot-Based Subcells