Abstract:Lignin is an abundant source of aromatics with low effective hydrogen-to-carbon ratio (H/Ceff), and the depolymerization of lignin provides significant potential for producing liquid products with an improved H/Ceff value. In this work, the catalytic conversion of lignin monomers, dimer, trimers, and realistic lignin over spherical MOF-derived catalysts was well established, to get liquid fuels with a higher H/Ceff. The optimal ratio of the catalyst exhibited good hydrodeoxygenation activity and stability for the hydrotreatment of lignin model compounds and lignin. The addition of Mo facilitated the decrease of the particle size of a spherical structure, strengthened the electron-transfer capability between metals Mo and Ni, and enhanced the acid strength. All of these factors contributed to higher hydrodeoxygenation activity in the hydrotreatment process. Up to 100% conversion and 90% yields of ethylcyclohexane and cyclohexanol with H/Ceff values of 2.0 and 1.667, respectively, were obtained. The catalyst achieved a decrease of the oxygen element and an increase of H/Ceff and HHV values. The physicochemical characterizations were performed by various means including X-ray diffraction (XRD), scanning electronic microscopy (SEM), transmission electron microscopy (TEM), H2-temperature-programmed reduction (H2-TPR), NH3-temperature-programmed desorption (NH3-TPD), pyridine-infrared spectroscopy (Py-IR), inductively coupled plasma emission spectrometer (ICP), and Raman and X-ray photoelectron spectroscopy (XPS) analyses, which definitely elucidated the formation of a synergistic effect between metals Mo and Ni. Additionally, a control experiment also illustrated the synergistic effect that facilitated the occurrence of the hydrotreatment process under lower temperatures after the addition of metal Mo. Based on the optimal reaction condition (240 °C, 4 h, 2.0 MPa H2), both lignin and its monomers/dimers/trimers could be effectively hydrotreated to afford liquid products with improved H/Ceff value compared to raw lignin.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c05273.Py-IR spectra of different catalysts (Figure S1); mass balance of hydrogenation under the optimal reaction condition (Figure S2); GC-MS results and product distributions of bio-oil from different lignin feedstocks (Figure S3); and recycling experiments of different lignin feedstocks (Table S1) (PDF)This article has not yet been cited by other publications.

High performance of Mo-promoted Ir/SiO2 catalysts combined with HZSM-5 toward the conversion of cellulose to C5/C6 alkanes.

Catalytic Fast Pyrolysis of Cellulose in a Microreactor System Using Hierarchical Zsm-5 Zeolites Treated with Various Alkalis

Preparation of aromatics from fast catalytic pyrolysis of cellulose over alkali-treated HZSM-5

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

[Influence of ZSM-5(38)/Al-MCM-41 Composite Molecular Sieve Catalysts on Pyrolysis of Cellulose].

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Solvent-free Crystallization of ZSM-5 Zeolite on SiC Foam As a Monolith Catalyst for Biofuel Upgrading

Conversion of Palmitic Acid to Jet Fuel Components over Mo/H-ZSM-22 Bi-Functional Catalysts with High Carbon Reservation

Improving catalytic production of aromatic hydrocarbons with a mesoporous ZSM-5 modified with nanocellulose as a green template

Catalytic Pyrolysis of Microcrystalline Cellulose Extracted from Rice Straw for High Yield of Hydrocarbon over Alkali Modified ZSM-5

Integration of Biomass Catalytic Pyrolysis and Methane Aromatization over Mo/HZSM-5 Catalysts

Highly stable Mo-based bimetallic catalysts for selective deoxygenation of oleic acid to fuel-like hydrocarbons

High yield production of C2–C3 olefins and para-xylene from methanol using a SiO2-coated FeOx/ZSM-5 catalyst

Direct conversion of cellulose using carbon monoxide and water on a Pt-Mo2C/C catalyst

Production of gasoline components from biomass catalytic hydropyrolysis using zeolite-based bifunctional catalysts

A Promising Moox-Based Catalyst for N-Heptane Isomerization

Catalytic Conversion of Lignin to Liquid Fuels with an Improved H/C eff Value over Bimetallic NiMo-MOF-Derived Catalysts

Light Promotion and Different Reaction Pathways Enhance Photothermocatalytic Syngas Production for Cellulose Steam Reforming Over Ni/θ‐Al2O3

Single-Step Synthesis of Dimethyl Ether from Biomass-Derived Syngas over Cuo-Zno-Mox (M = Zr, Al, Cr, Ti)/Hzsm-5 Hybrid Catalyst: Effects of Mox

Hydroconversion of n-octane over different MoO3 phase modified nanosized HZSM-5 zeolites

Synthesis of Ni/mesoporous ZSM-5 for direct catalytic conversion of cellulose to hexitols: modulating the pore structure and acidic sites via a nanocrystalline cellulose template