Abstract:As the advancement of deep earth energy engineering in the 21st century, the challenges imposed by dynamic loads and high temperatures will be increasingly regular. This paper studied the dynamic mechanical behaviors and fracture characteristics of defective red sandstone (single fissure inclination of 0°, 30°, 60°, and 90°) subjected to thermal treatments (25 °C, 200 °C, 400 °C, 600 °C, and 800 °C) under descending amplitude low cycle (DALC) impact loading. The experiments were conducted using a modified split Hopkinson pressure bar (SHPB) system, and the fracture surfaces of the failed specimens were characterized through the use of high-resolution 3D laser scanning to obtain point cloud data. Subsequently, the fractal, roughness, texture, and elevation features of fracture surfaces were analyzed using the boxing-counting method, grayscale co-occurrence matrix (GLCM), and elevation-based statistics. The scanning electron microscopy (SEM) was utilized to study the fracture micromorphology as well. Additionally, the mechanisms of damage and fracture evolution were discussed based on the results of X-ray diffractometry (XRD), synchronous thermal analysis (STA), discrete element method (DEM), and strain energy density theory. The results demonstrate that the peak stress and dynamic elastic modulus deteriorate with rising temperatures and increase with larger fissure angles. While the peak strain, strain rate, and peak stress increase factor (PIF) exhibit the opposite trend. The threshold values for the intensification of these events are 400 °C and 60°. The damage is dominated by tensile cracks, which transition to shear at 30° and 60° due to temperature dependence. Meanwhile, the fractal dimension (D C ), joint roughness coefficient (JRC), second-order statistics of GLCM, and elevation eigenvalues have been modeled using multiple regression analysis to investigate their interaction with temperature and fissure angle. The best-fit models illustrate significant linear or non-linear correlations between the aforementioned parameters and the mechanical parameters. Furthermore, the magnitude and distribution pattern of thermal cracks, as well as the growth of shear fractures, are governed by the dehydration, thermal expansion, phase transition, plasticization, thermal fracture, and thermal decomposition. Finally, strain energy density theory manifests promising prospects for understanding and predicting DALC impact fracture patterns of specimens.

Mixed mode I-II fracture mechanism of sandstone samples after thermal treatment: Insights from optical monitoring and thermal analysis

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

Experimental investigation on mixed mode I-III fracture behaviors and degradation mechanism of sandstone under thermal-chemical stimulation

Experimental investigation on the fracture surface features of heat-treated red sandstone containing fissure under constant amplitude low cycle impact using 3D digital reconstruction

Effect of temperature on mixed mode I/III fracture behavior of diorite: An experimental investigation

Experimental investigation of a fissured rock with thermal storage potential subjected to descending amplitude low cycle impacts

Fracture and deformation behaviors of saturated and dried single-edge notched beam sandstones under three-point bending based on DIC

Mechanical behavior and fracture characteristics of high-temperature sandstone under true triaxial loading conditions

Study on dynamic fracture properties of sandstone under the effect of high-temperature using large-scale sample

Experimental Study on Dynamic Tensile Mechanical Behavior and Fracture Mechanical Characteristics of Sandstone with a Single Prefabricated Fissure

Thermal effects on fracture toughness of cracked straight-through Brazilian disk green sandstone and granite

Effect of loading rate on mode I fracture behavior of red sandstone: Insights from AE and DIC techniques

Thermal treatment effects on rock fracture behaviour under three loading modes: A comparative analysis of granite and mudstone

Opening and Mixed Mode Fracture Processes in a Quasi-Brittle Material Via Digital Imaging

Thermal Effects on Tension Softening Response and Fracture Characteristics of Quartz-Diorite

Uniaxial Compressive Behaviors of Sandstone-concrete Binary with Rough Interface after High Temperatures

Energy and Infrared Radiation Characteristics of the Sandstone Damage Evolution Process

Initial and unstable fracture toughness of quartz-diorite rock under mixed mode I/II loading: Experimental and numerical investigation

Tensile mechanical behavior and fracture characteristics of sandstone exposed to freeze-thaw treatment and dynamic loading

Investigation of the Fracture Characteristics of Rock Mass After Thermal–Mechanical Damage Coupling

Experimental investigation of mixed mode I-II fracture property of thermally treated granite under dynamic loading