Abstract:The classical critical state theory of granular mechanics makes no reference to the anisotropy of the material and has thus raised questions over the uniqueness of the critical state when fabric anisotropy is taken into consideration. The recently developed anisotropic critical state theory (ACST) suggests that at a critical state the fabric anisotropy tensor acquires normwise a unique normalized critical state value, while the orientation depends on the shearing mode. Consequently it follows that for the same granular material under the same loading conditions, the fabric anisotropy tensor at the critical state should be independent of the initial fabric anisotropy. The fabric tensor in the ACST is referred to in a general sense, not specifying what entity it is constituted of. The present study investigates the evolution of three commonly used fabric tensors based on particle orientation, contact normal, and void vectors, under constant mean effective stress biaxial loading using the two-dimensional discrete element method (2D DEM). These fabric measurements provide a relatively comprehensive coverage of the fundamental characteristics of the particle-contact-void system of a granular material. Global shear banding is avoided in the biaxial simulations to keep the samples as homogeneous representative volumes during loading. The analysis confirms the existence of a unique fabric based on each of the three fabric tensor formulations for the same granular material under the same loading conditions at a critical state. The relationship between the void vector fabric tensor and the contact normal and particle orientation fabric tensors is also tentatively explored. Different fabric quantities (including scalars such as the void ratio and fabric tensor norm and orientation) are found to require different levels of deformation to reach their respective critical states. (C) 2017 American Society of Civil Engineers.

Fabric evolution and dilatancy within anisotropic critical state theory guided and validated by DEM

A New Definition on Critical State of Granular Media Accounting for Fabric Anisotropy

Effects of initial fabric anisotropy on mechanical behavior and critical state of granular soil

Unique Quantification of Critical State in Granular Media Considering Fabric Anisotropy

Evolution of Various Fabric Tensors for Granular Media Toward the Critical State

Quantification of Fabric Evolution in Granular Material under Cyclic Loading

A CFD–DEM Study on the Suffusion and Shear Behaviors of Gap-Graded Soils under Stress Anisotropy

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

DEM Investigation on the Evolution of Fabric under True Triaxial Conditions in Granular Materials

Unified Modeling of the Influence of Consolidation Conditions on Monotonic Soil Response Considering Fabric Evolution

Dependency of Dilatancy Ratio on Fabric Anisotropy in Granular Materials

Micro-Scale Modeling of Anisotropy Effects on Undrained Behavior of Granular Soils

A Hypoplastic Model for Granular Soils Incorporating Anisotropic Critical State Theory

High-cycle Shakedown, Ratcheting and Liquefaction Behavior of Anisotropic Granular Material with Fabric Evolution: Experiments and Constitutive Modelling

Modeling Combined Fabric Evolution in an Anisometric Granular Material Driven by Particle-Scale X-Ray Measurements

Numerical Simulation of Whole Process and States of Tensile Membrane Structure

Lessons learned from matching 3D DEM and experiments at macro, meso and fabric scales for triaxial compression tests on lentils

On non-coaxiality and fabric evolution of granular media in circular shear simulated by DEM

Evolution of Soil Fabrics Toward Critical State for Granular Soils: A Comprehensive Investigation

A novel constitutive model of the anisotropic sand accounting for the fabric evolution

Critical State for Anisotropic Granular Materials: A Discrete Element Perspective