SPH simulation and experimental investigation of fiber orientation in UHPC beams with different placements

Huanghuang Huang,Xiaojian Gao,Yifeng Li,Anshuang Su

DOI: https://doi.org/10.1016/j.conbuildmat.2019.117372

IF: 7.4

2020-01-01

Construction and Building Materials

Abstract:Various placement methods can be applied to real ultra-high performance concrete (UHPC) structure elements. When placing fresh mixture at single or several target positions to fill the mold, the fiber orientation in the hardened specimen may be significantly variable with the flow distance. To investigate the influence of various placements on fiber orientation in UHPC beams, three casting methods, e.g., placing fresh mixture from one end, the middle position and two ends of the mold, respectively were simulated by the smoothed particle hydrodynamics (SPH) approach. Experimental investigations were also performed on fiber orientation and flexural properties of UHPC beams prepared by these three placements. Based on the modelling and experimental results, fiber orientation for each placement exhibited a descending tendency along the flow distance and was significantly reduced by the cooccurrence of two opposite flows. The variations of the number of fibers per unit area and fiber orientation coefficient reached 52.4% and 63.2%. Consequently, flexural strength, toughness and deflection at modulus of rupture tended to decrease with the flow distance and were notably aggravated by two opposite flow of mixtures. The variations of these three parameters along the beam specimen reached as high as 32.8%, 51.6% and 40.6%, respectively. Therefore, it is vital to control flow distance and direction of fresh mixture to manufacture UHPC elements with a high homogeneity. (C) 2019 Elsevier Ltd. All rights reserved.