Abstract:The rocking response of freestanding building contents simplified as rigid bodies was usually investigated in two dimensions with ground motions as the input, while their three-dimensional (3-D) rocking response subjected to horizontal bidirectional floor motions needs further investigation in both deterministic and probabilistic views. In this paper, the rocking response of freestanding 3-D rectangular blocks subjected to seismic excitations with two horizontal components are first investigated by shake table tests and finite element (FE) numerical simulation. An incremental dynamic analysis-based overturning fragility assessment method for the blocks within a building subjected to bidirectional ground motions is then proposed, using uncoupled nonlinear FE models of the block-building systems. The overturning fragility of six blocks within a four-story reinforced concrete frame structure is assessed. The influence of excitation directions, floor levels, block slenderness ratios (2.5, 3, 3.5 and 4), block sizes (size parameters of 91 mm, 182 mm and 364 mm) and intensity measurements (IMs) on the overturning fragility of the block is characterized. The experimental overturning fragility curves of three blocks in real conditions under bidirectional seismic excitations are finally obtained from the shake table tests. Rocking-torsional rotations are observed for the block with sliding not allowed. The block rocks around a side or a vertex while overturns around a side. Except the largest block, the block under bidirectional excitations is usually more and sometimes equally vulnerable to overturn in comparison to that under unidirectional excitations. The block on a higher floor is found to be more vulnerable to overturn than that on a lower floor considering the peak ground acceleration-based IM. These observations highlight on the significance of 3-D analysis for the rocking blocks considering floor acceleration amplification. This paper also enlarges the experimental database of seismic rocking response of rectangular blocks under bidirectional horizontal motions.

Overturning risk of furniture in earthquake-affected areas:

A New Simple Formula to Evaluate the Risk of Furniture Overturning

ROCKING RESPONSE OF FREE-STANDING FURNITURES UNDER EARTHQUAKE FLOOR MOTIONS

Seismic overturning fragility analysis for freestanding building contents subjected to horizontal bidirectional floor motions

Probabilistic Assessment of Seismic Stability of a Rock Slope by Combining the Simulation of Stochastic Ground Motion with Permanent Displacement Analysis

Impact of Probabilistic Modeling Alternatives on the Seismic Fragility Analysis of Reinforced Concrete Dual Wall–Frame Buildings towards Resilient Designs

Seismic Vulnerability Assessment Indices for Buildings: Proposals, Comparisons and Methodologies at Collapse Limit States

Retrofitting through the loss-Based Earthquake engineering

Prediction of Seismic Collapse Vulnerability of RC Frame Based on Pushover Analysis Method

Using image-based inspection data to improve response predictions of earthquake-damaged unreinforced masonry buildings

Seismic retrofit cost model for Italian masonry residential buildings to support territorial-scale risk analysis

Experimental study on rocking blocks subjected to bidirectional ground and floor motions via shaking table tests

Seismic fragility analysis of slopes based on large-scale shaking table model tests

Simulation of Earthquake-Induced Hazards of Falling Exterior Non-Structural Components and Its Application to Emergency Shelter Design

A new method of assessing the stability of anti-dip bedding rock slopes subjected to earthquake

Shear walls optimization in a reinforced concrete framed building for seismic risk reduction

Appraising the Risk Assessment of Non-Structural Components via Simplified and Machine-Learning-Based Approaches

Damage assessment of unreinforced masonry buildings incorporating damage accumulation

Seismic Risk Assessment for A Reinforced Concrete Frame Designed According to Chinese Codes

A hybrid risk assessment approach for assessing the earthquake risks in worn-out urban fabrics: a case study in Iran

Benchmarking The Use of Shaking Table for Simulating the Earthquake Performance of Typical Residential Houses for Disaster Risk Reduction