Abstract:Magnetic eddy current losses is significant in permanent magnet motors, especially in high-power density permanent magnet motors. It significantly affects the magnet’s temperature and properties and may cause irreversible demagnetization. Several methods for reducing magnetic eddy current losses is proposed to address these problems. First, a field-circuit coupled mathematical model was established to calculate the magnetic eddy current losses. Experiments on the phase current and magnetic eddy current losses verify the accuracy of field-circuit coupled mathematical model. Then based on the model, the effect of the trigger angle, slot opening width, pole arc coefficient, pole arc center offset, and auxiliary slots on the magnetic eddy current losses were assessed. The results showed that the magnetic eddy current loss could be reduced by choosing a suitable leading trigger angle, pole arc coefficient, and pole arc center offset. A smaller slot opening width reduced the eddy current losses. A novel auxiliary slot with an optimized size is proposed to reduce eddy current losses. Finally, taking the trigger angle, slot opening width, pole arc coefficient, pole arc center offset and the auxiliary groove as the optimization factors and the magnetic eddy current loss as the optimization target, the optimal parameter scheme is obtained by Taguchi method. The simulation results show that the optimized magnetic eddy current losses is reduced by 8.57%.

Eddy Current Loss Control in High Speed PM Starter-Generator

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Control Integrated Studies on High Speed Permanent Magnetic Generators System

3-D Eddy Current Analysis in the End Region of a Turbogenerator by Using Reduced Magnetic Vector Potential

Armature Design of an Ultra-High Speed Pm Generator

Coupling analysis of high speed PM generator used for distributed generation system

Topology Investigation on High Speed PM Generator with Back Wound Windings.

Multidisciplinary Design and Optimization of High-Speed Hybrid Excitation Starter Generator for Aircraft Power System

Design of High-Speed PMSM Considering Multi-Physics Fields and Power Converter Constraints

Loss Calculation and Thermal Simulation Analysis of High-Speed PM Synchronous Generators with Rotor Topology

High Speed Electrical Generators, Application, Materials And Design

Loss Calculation and Thermal Analysis of Three Modes of Retaining Sleeves for High-Speed PM Generators

Electromagnetic Design and Analysis of High Speed Permanent Magnet Motor with Composite Rotor

Windings Indirect Liquid Cooling Method for a Compact Outer-Rotor PM Starter/Generator With Concentrated Windings

Control Design for PMM Starter-Generator Operated in Flux-Weakening Mode

Influence on Rotor Eddy-Current Loss in High-Speed Pm Bldc Motors

Loss and Thermal Analysis of a High-Power-Density Permanent Magnet Starter/Generator

High-speed Permanent Magnet Electrical Machines — Applications, Key Issues and Challenges

Improved Speed Extension for Permanent Magnet Synchronous Generators by Means of Winding Reconfiguration

Profiling the Eddy Current Losses Variations of High-Speed Permanent Magnet Machines in Plug-in Hybrid Electric Vehicles

Design and analysis of a novel hybrid cooling method of high-speed high-power permanent magnet assisted synchronous reluctance starter/generator in aviation applications