A Magnetic Activated Sludge for Cu(ii) and Cd(ii) Removal: Adsorption Performance and Mechanism Studies

Yingrui Liu,Qingwei Yang,Rui Feng,Weiying Xu,Liangguo Yan,Bin Du,Qin Wei,Dong Wei

DOI: https://doi.org/10.1039/c9nj04198b

IF: 3.3

2019-01-01

New Journal of Chemistry

Abstract:In the present study, a novel magnetic activated sludge (MAS) was successfully synthesized and applied for heavy metal removal.

What problem does this paper attempt to address?

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

Lili Xu,Jie Chen,Yuezhong Wen,Hong Li,Jianqing Ma,Dongmei Fu

DOI: https://doi.org/10.1080/19443994.2015.1019369

IF: 1.1

2015-01-01

Desalination and Water Treatment

Abstract:A novel CS2-modified chitosan encapsulated magnetic Fe3O4 nanoparticles (CMCS@Fe3O4) was prepared for the removal of Cd(II) from aqueous solution. The adsorption behavior of the CMCS@Fe3O4 toward Cd(II) was studied using batch method. The CMCS@Fe3O4 showed a rapid process and a superior adsorption capacity for Cd(II). The adsorption kinetics followed the pseudo-second-order and the equilibrium data were well described by the Langmuir isotherm for the CMCS@Fe3O4. The maximum adsorption capacity of CMCS@Fe3O4 for Cd(II) was 200 mg g −1 from the Langmuir isotherm. Based on Fourier transform infrared spectroscopy analysis, the –NH2 and –SH groups on the CMCS@Fe3O4 mainly participated in the Cd(II) adsorption process. In addition, the common coexisting ions had a negligible impact on Cd(II) adsorption on the CMCS@Fe3O4. Overall, the results reported herein indicated that the CMCS@Fe3O4 is very attractive and implies a potential of practical application for the removal of toxic heavy metals.
Preparation of smart magnetic fluids and application in sewage treatment: Copper adsorption, kinetic and isotherm study

Deli Xiao,Hui Jiang,Yunlin Zhou,Alhassan Imran,Hongyan Zhao,Yanping Bi

DOI: https://doi.org/10.1016/j.jenvman.2024.120142

IF: 8.7

2024-02-03

Journal of Environmental Management

Abstract:The effective removal of heavy metal ions from sewage remains a critical issue, and applying the operability of magnetic materials to large volume wastewater treatment has been a significant challenge. In this paper, metal ions adsorption induced aggregation strategy is proposed to solve this contradiction. The intelligent magnetic fluid designed in this study is a well-dispersed fluid state when treating sewage, and can efficiently adsorb heavy metal ions in wastewater with high adsorption capacity and ultra-fast adsorption kinetics. More importantly, after saturation of adsorption, the magnetic fluid will transform from a well-dispersed fluid state to an agglomeration state which is easy to precipitate and separate via external magnetic field . In a simple and effective way, the particles size of magnetic nanoparticles was precisely controlled by cellulose derivatives modification to obtain a stable magnetic fluid in water. The Freundlich model best described Cu 2+ adsorption on magnetite nanoparticles, the correlation coefficients from the Cu 2+ adsorption on the two magnetic fluids are 0.9554 and 0.9336, n are 1.868 and 2.117, revealing a favorable adsorption of Cu 2+ onto magnetic fluids. The pseudo second-order model fitted the adsorption kinetic data better, the q e are 0.1948 and 0.1315 mmol/g and the R 2 are 0.9999, indicating that the adsorption of Cu 2+ onto the magnetic fluid was dominated by chemisorption. Moreover, the removal rate of Cu 2+ in tap water and lake water was more than 97.1%, and the removal rate of large volume sewage was 81.7%. The synthetic magnetic fluid has high adsorption capacity, ultra-fast adsorption kinetics, reusability and easy separation, indicating its potential application for the removal of heavy metal ions from large-volume sewage.

environmental sciences
Design of Magnetic Nanoparticles with High Magnetic Separation Efficiencies and Durability for Cu2+ Adsorption

Shenghua Wang,Yingying Yu,Le He,Dake Zhang,Miaomiao Ye

DOI: https://doi.org/10.1088/1361-6528/ab55c2

IF: 3.5

2019-01-01

Nanotechnology

Abstract:Fe3O4@SiO2 core-shell structured nanoparticles are promising candidates for adsorption of heavy metal ions from waste water due to their high adsorption capacities and feasible recycling process. However, their practical applications have been hindered by the trade-off between the magnetic separation efficiency and durability. In this study, we demonstrate the preparation of amino-functionalized Fe3O4@SiO2 absorbents with both high magnetic separation efficiencies and durability in strong acidic environment. Our key strategy was to use a thin but highly protective silica layer by manipulating the sol-gel chemistry. With the protection of a thin but poorly permeable silica shell, the durability of the Fe3O4 in strong acid solution was significantly enhanced while its magnetic separation efficiency was maintained. We also demonstrated the adsorption of Cu2+ from aqueous solution corresponded well with the pseudo-second-order kinetic model and the Langmuir adsorption isotherm. The adsorption capacity can be further improved by coating an additional layer of mesoporous SiO2 outside Fe3O4@SiO2. The design of highly durable magnetic absorbents without sacrificing the magnetic separation efficiency greatly facilitates the practical applications of magnetic nanoparticles in adsorption of heavy metal ions.
Efficient Removal of Cu(II) and Citrate Complexes by Combined Permanent Magnetic Resin and Its Mechanistic Insights

Qimeng Li,Haiou Song,Ruiming Han,Guoxiang Wang,Aimin Li

DOI: https://doi.org/10.1016/j.cej.2019.02.070

IF: 15.1

2019-01-01

Chemical Engineering Journal

Abstract:Owing to the enormous threat from anthropogenic contamination in water resources, the effective control of heavy-metal pollution has become increasingly important. In this study, the combination of permanent magnetic anion exchange resin (MAER) and magnetic cation exchange resin (MCER) was employed to efficient removal of Cu(II) and citrate acid (CA). The removal mechanisms were systematically investigated by batch adsorption experiments, and also certificated by species distribution calculation, kinetic tests and solid-phase characterizations. The presence of CA markedly inhibited the adsorption of Cu(II) onto MCER, while the co-existing Cu(II) was beneficial for CA uptake onto MAER. With the increase of Cu(II) concentrations, the adsorption amount of CA onto MAER gradually increased and reached a plateau, with promotion rates ranging of 24.4%-47.9%. For combined magnetic resins treatment, as the MAER dosage increased from 0 to 1.50 g/L, the removal efficiencies of CA and Cu(II) were enhanced from 1.1% and 33.2% to 98.8% and 99.1%, respectively. The anionic [Cu-CA] complexes (mainly CuL-and a small fraction of Cu2L22-) in bi-solutes system possessed higher affinity than free-CA species towards MAER, resulting in a mutual enhancement of Cu(II) and CA uptake. Both decomplexing-adsorption of Cu(II) from neutral Cu species (CuHL0) by MCER and direct complex-adsorption of anionic complex species (CuL-and Cu2L22-) by MAER were proposed as the mechanisms for synergetic removal of CA and Cu(II) in combined processes. Furthermore, nanoscale Cu powders were recovered from the desorption liquid by chemical reduction. The combined magnetic resins exhibited superior reusability over five repeated cycles, indicating their great potential in treatment of complexing heavy metal-organic acid wastewaters.
Using deep eutectic solvent dissolved low-value cotton linter based efficient magnetic adsorbents for heavy metal removal

Sihong Ye,Mingli Xu,Hui Sun,Ying Ni,Rui Wang,Runping Ye,Lingzhong Wan,Fangzhi Liu,Xiaonan Deng,Juan Wu

DOI: https://doi.org/10.1039/d3ra01248d

IF: 4.036

2023-01-01

RSC Advances

Abstract:A novel magnetic bio-adsorbent was synthesized by modifying cotton linter (CL) cellulose with deep eutectic solvents (DESs) and Fe 3 O 4 magnetic nanoparticles. And the adsorption mechanism of Cu 2+ by Fe 3 O 4 /CL-DESs in aqueous solution was proposed.

chemistry, multidisciplinary
Highly selective and ultrafast removal of cadmium and copper from water by magnetic core-shell microsphere

Shunli Wan,Chunlei Yu,Yan Li,Zhongxiang Lu,Yuchen Wang,Yan Wang,Feng He

DOI: https://doi.org/10.1016/j.cej.2020.126576

IF: 15.1

2021-02-01

Chemical Engineering Journal

Abstract:Advanced treatment of heavy metals from various types of water is challenging but of great urgency due to their serious threat to water quality security. In this study, a new magnetic hybrid adsorbent with the core-shell structure, which is denoted as Fe3O4@SiO2@MO, was prepared by successively covering SiO2 and manganese oxide (MO) on Fe3O4. The covered SiO2 was designed to protect the magnetic core Fe3O4 from acid corrosion in practical application. The Fe3O4@SiO2@MO can be separated from solution within 10 s using an external magnetic field and very quickly remove Cd(II) and Cu(II) with equilibrium time below 10 min due to its special coating structure, which sharply reduces the diffusion distance of two metals before adsorption. Their effective coefficients of intraparticle diffusion (D) were determined to be 2.0 × 10−10 and 8.5 × 10−10 cm2 s−1. High levels of Ca(II) and Mg(II) inconspicuously affected the Cd(II) and Cu(II) retention onto Fe3O4@SiO2@MO, and only a decrease in removal below 20 and 12% for Cd(II) and Cu(II) occurred, respectively, due to the specific inner-sphere complexation between MO and the targeted metals. We preliminarily uncovered this interaction using XPS and FTIR analyses. Furthermore, in cyclic batch experiments, 1 kg Fe3O4@SiO2@MO can effectively treat 0.5 and 3.25 m3 of Cd(II)- and Cu(II)-contaminated wastewater to satisfy their corresponding discharge standards, respectively, which is equivalent to 500 and 3250 folds of its own weight. All results validate that Fe3O4@SiO2@MO is a promising engineered magnetic adsorbent to decontaminate heavy-metal-polluted wastewater.

engineering, chemical, environmental
Low-Cost magnetic adsorbent for efficient Cu(II) removal from water

Li-Ting Zhang,Jiao Guo,Meng Li,Orphe Bukasa Tshinkobo,Chao Wang,Chang-Guo Xue,Yin Liu,Jian-Jun Li

DOI: https://doi.org/10.1088/2053-1591/abbe3f

IF: 2.025

2020-10-01

Materials Research Express

Abstract:Abstract Selective adsorption using magnetic adsorbent is supposed as one of the most effective methods for heavy metal removal from water for the advantage of efficient solid-liquid separation. However, the application of this technique is hindered by the high cost, unfavorable environmental effects of the chemical synthesis of magnetic adsorbents. In this study, the industrial waste coal-fly-ash magnetic sphere (CMS) were carefully processed to prepare cheap and green magnetic core material. Then, a composite bioadsorbent using CMS as core and chitosan (CS) as the shell (CMS@CS for short) was fabricated via an extrusion-dripping method. Structural investigations indicate that the obtained CMS@CS samples are hollow microsphere with a solid wall or porous solid microsphere depending on the preparation conditions. CMS particles are evenly distributed in both microspheres. The porous sample has an 81.49 m 2 g −1 special surface area, 96 times larger than the hollow. The highest Cu(II) adsorption of the porous sample is measured as 22.41 mg g −1 , 3.6 times larger than that of the hollow. The Cu(II) adsorption of the CMS@CS samples is closely related to the internal structure, surface chemical modification, and solution pH. The adsorption mechanism could be explained by a two-step procedure model. The CMS@CS adsorbents have an average magnetism of 10.07 emu g −1 , thus could be magnetically separated efficiently. The density of CMS@CS is tested as 1.45–1.65 g cm −3 . A similar density with water would improve its suspend ability in the water. The used CMS@CS adsorbent could be recycled several times after appropriate treatment.

materials science, multidisciplinary
Solvent-Free Synthesis of Magnetic Sewage Sludge-Derived Biochar for Heavy Metal Removal from Wastewater

Jiayi Tian,Kexin Guo,Yucan Sun,Ruoxi Lin,Tan Chen,Bing Zhang,Yifei Liu,Ting Yang

DOI: https://doi.org/10.3390/ijerph20010155

IF: 4.614

2023-01-01

International Journal of Environmental Research and Public Health

Abstract:The commonly used two-step and one-pot synthesis methods for producing biochar require the use of iron salt solutions, resulting in the undesirable consequences of energy consumption for dewatering and potential pollution risks. To address this drawback, a magnetic sewage sludge-derived biochar (MSBC-2) was synthesized by a solvent-free method in this study. The pseudo-second-order kinetic model and Langmuir model provided the best fit to the experimental data, implying a monolayered chemisorption process of Pb2+, Cd2+and Cu2+ onto MSBC-2. As the reaction temperature increased from 25 °C to 45 °C, the maximum adsorption capacities increased from 113.64 mg·g−1 to 151.52 mg·g−1 for Pb2+, from 101.01 mg·g−1 to 109.89 mg·g−1 for Cd2+ and from 57.80 mg·g−1 to 74.07 mg·g−1 for Cu2+, respectively. Thermodynamic parameters (ΔG0 < 0, ΔS0 > 0, ΔH0 > 0) revealed that the adsorption processes of all three metals by MSBC-2 were favourable, spontaneous and endothermic. Surface complexation, cation-π interaction, ion exchange and electrostatic attraction mechanisms were involved in the adsorption of Pb2+, Cd2+ and Cu2+ onto MSBC-2. Overall, this study will provide a new perspective for the synthesis of magnetic biochar and MSBC-2 shows great potential as an adsorbent for heavy metal removal.
Magnetic EDTA-modified chitosan/SiO2/Fe3O4 adsorbent: Preparation, characterization, and application in heavy metal adsorption

Yong Ren,Hayder A. Abbood,Fengbo He,Hong Peng,Kaixun Huang

DOI: https://doi.org/10.1016/j.cej.2013.04.059

IF: 15.1

2013-06-01

Chemical Engineering Journal

Abstract:The aim of this study was to develop a novel magnetic EDTA-modified chitosan/SiO2/Fe3O4 adsorbent (EDCMS) for removal of heavy metals ions from aqueous solution. EDCMS was prepared by surface modification of chitosan/SiO2/Fe3O4 (CMS) with EDTA using water-soluble carbodiimide as the cross-linker in buffer solution. Both EDCMS and CMS were characterized and their adsorption properties for removal of heavy metal ions under varied experimental conditions were also investigated. The results revealed that EDCMS had better tolerance to low pH and exhibited much higher removal efficiency for the metal ions in comparison with CMS. Moreover, the adsorption kinetics for EDCMS and CMS followed the mechanism of the pseudo-second order kinetic model, and their equilibrium data were fitted with the Langmuir isothermal model well. The maximum adsorption capacities of CMS were found to be 0.495, 0.045, 0.040mmolg−1 for Cu(II), Pb(II) and Cd(II) ions at pH 5.0 (25°C), respectively, which showed the selective adsorption of Cu(II) ions, and the values of EDCMS were 0.699, 0.596, 0.563mmolg−1 for Cu(II), Pb(II), and Cd(II) ions under the same conditions, respectively, which were much higher than that of CMS. The adsorption process of EDCMS and CMS was endothermic, and further recycle experiments showed there was about 25% loss in the adsorption capacity of EDCMS for heavy metal ions after 12 times reuse. All the results demonstrate that EDCMS is a potential recyclable adsorbent for hazardous metal ions in waste water.

engineering, chemical, environmental
Magnetic recyclable biosorbents based on cotton cellulose and chitosan for copper(ii) removal from polluted water

Weina Xue,Yanbo Peng,Christopher Peter Chanway,Yuanyuan Shao,Bing Liu,Feiyong Chen,Ruimin Mu,Yongshan Ma,Xuemei Li,Guixia Ma,Yu Tian,Yifan Li,Jinzhu Wu

2021-01-01

Fresenius environmental bulletin

Abstract:Novel low-cost, high efficiency and recyclable adsorbents have been considered more and more attractively. Cellulose and chitosan are the most abundant biopolymers in the nature. In this study, novel magnetic recyclable biosorbents based on cotton cellulose or chitosan (PCCM and PCAM) were synthesized, characterized, and applied for the Cu(II) adsorption in the water treatment. The kinetics study showed that the adsorption process of PCCM/PCAM fit for the second-order kinetics model and the Langmuir isotherm suggested that the overall process was a monolayer adsorption and seemed to mainly contain the coordination and complexation. It was found that the adsorption capacity of PCCM reached 85.0 mg/g. The optimum pH was 5.0 for PCCM. PCCM showed a higher adsorption capacity at stirred situation, even when it was reused for five times. The excellent reusability indicated that PCCM and PCAM were efficient, however their stability adsorption was still needed to test for actual treatment of toxic metal pollution in water.
Magnetic Chitosan/sodium Alginate Gel Bead As a Novel Composite Adsorbent for Cu(II) Removal from Aqueous Solution

Hu-Chun Tao,Shuo Li,Li-Juan Zhang,Yi-Zhen Chen,Li-Ping Deng

DOI: https://doi.org/10.1007/s10653-018-0137-5

2018-01-01

Environmental Geochemistry and Health

Abstract:Using sodium alginate hydrogel as skeleton, in combination with chitosan and magnetic Fe3O4, a new type of magnetic chitosan/sodium alginate gel bead (MCSB) was prepared. Adsorptive removal of Cu(II) from aqueous solutions was studied by using the MCSB as a promising candidate in environmental application. Different kinetics and isotherm models were employed to investigate the adsorption process. Based on Fourier transform infrared spectroscopy, field-emission scanning electron microscope, CHNS/O elements analysis, vibration magnetometer, and various means of characterization, a comprehensive analysis of the adsorption mechanism was conducted. The MCSB had a good magnetic performance with a saturation magnetization of 12.5 emu/g. Elemental analysis proved that the addition of chitosan introduced a considerable amount of nitrogen-rich groups, contributing significantly to copper adsorption onto gel beads. The contact time necessary for adsorption was optimized at 120 min to achieve equilibrium. Experimental data showed that the adsorption process agreed well with the Langmuir isotherm model and the pseudo-second-order kinetics model. The theoretical maximum adsorption capacity of MCSB for Cu(II) could reach as high as 124.53 mg/g. In conclusion, the MCSB in this study is a novel and promising composite adsorbent, which can be applied for practical applications in due course.
Xanthate-Modified Magnetic Fe3O4@SiO2-Based Polyvinyl Alcohol/Chitosan Composite Material for Efficient Removal of Heavy Metal Ions from Water

Shifan Wang,Yuan Liu,Aiwen Yang,Qi Zhu,Hua Sun,Po Sun,Bing Yao,Yunxiao Zang,Xihua Du,Liming Dong

DOI: https://doi.org/10.3390/polym14061107

IF: 5

2022-03-10

Polymers

Abstract:Chitosan has several shortcomings that limit its practical application for the adsorption of heavy metals: mechanical instability, a challenging separation and recovery process, and low equilibrium capacity. This study describes the synthesis of a magnetic xanthate-modified polyvinyl alcohol and chitosan composite (XMPC) for the efficient removal and recovery of heavy metal ions from aqueous solutions. The XMPC was synthesized from polyvinyl alcohol, chitosan, and magnetic Fe3O4@SiO2 nanoparticles. The XMPC was characterized, and its adsorption performance in removing heavy metal ions was studied under different experimental conditions. The adsorption kinetics fit a pseudo-second-order kinetic model well. This showed that the adsorption of heavy metal ions by the XMPC is a chemical adsorption and is affected by intra-particle diffusion. The equilibrium adsorption isotherm was well described by the Langmuir and Freundlich equations. The XMPC reached adsorption equilibrium at 303 K after approximately 120 min, and the removal rate of Cd(II) ions was 307 mg/g. The composite material can be reused many times and is easily magnetically separated from the solution. This makes the XMPC a promising candidate for widespread application in sewage treatment systems for the removal of heavy metals.

polymer science
Removal of cadmium from wastewater by magnetic zeolite synthesized from natural, low-grade molybdenum

Zhen-Dong Peng,Xue-Ming Lin,Yu-Long Zhang,Zheng Hu,Xing-Jian Yang,Cheng-Yu Chen,Hua-Yi Chen,Yong-Tao Li,Jin-Jin Wang,Zhen-dong Peng,Xue-ming Lin,Yu-long Zhang,Xing-jian Yang,Cheng-yu Chen,Hua-yi Chen,Yong-tao Li,Jin-jin Wang

DOI: https://doi.org/10.1016/j.scitotenv.2021.145355

2021-06-01

Abstract:Zeolite has a high adsorption capacity for heavy metals, but it is difficult to separate from the medium because of its small particle size. In this study, magnetic zeolite was synthesized from natural, low-grade molybdenum ore by adding nano ferroferric oxide (saturation magnetization 83.43 emu/g) directly in the hydrothermal synthesis process, which was used to adsorb cadmium from wastewater. The results of scanning electron microscopy showed that the nano ferroferric oxide was adhered to the surface of the zeolite to make it magnetic. The vibrating sample magnetometer showed that the larger the amount of nano ferroferric oxide added, the higher the saturation magnetization of the magnetic zeolite. The saturation magnetization of the magnetic zeolite with a loading proportion of 25% was 18.18 emu/g with a specific surface area of 459.8 m2/g. The adsorption experiments showed that when the pH value is greater than 4, the adsorption capacity of magnetic zeolite is high and stable, and the theoretical maximum adsorption capacity is 204.2 mg Cd/g. Na+ and Ca2+ have different inhibitory functions on the adsorption capacity. The mapping graphs showed that cadmium is captured by the magnetic zeolite after contact with cadmium, and XRD confirmed the presence of cadmium oxide in the magnetic zeolite after adsorption, XPS and EDS results indicated that ion exchange is one of the main mechanisms of cadmium adsorption by magnetic zeolites, and electrostatic adsorption may also have a contribution.

environmental sciences
A novel method for solidification/stabilization of Cd(II), Hg(II), Cu(II), and Zn(II) by activated electrolytic manganese slag

Jirong Lan,Yiqie Dong,Yan Sun,Lu Fen,Min Zhou,Haobo Hou,Dongyun Du

DOI: https://doi.org/10.1016/j.jhazmat.2020.124933

IF: 13.6

2021-05-01

Journal of Hazardous Materials

Abstract:This study was aimed at removing and stabilizing heavy metals (HgII, ZnII, CuII, and CdII). A novel material (named A-EMS) for heavy metal removal was proposed by ball grinding activated electrolytic manganese slag (EMS) with low content of sodium hydroxide. For different application scenarios, the two physical properties of the materials were developed: the powdery A-EMS (powder) was used to remove heavy metals from wastewater. In addition, the blocky A-EMS (porous brick) was used to build barrier walls for tailings ponds to prevent heavy metals from flowing out. The maximum removal amount of Hg(II) Cd(II), Zn(II), and Cu(II) by A-EMS were 475.35, 77.72, 259.70, and 203.20 mg/g in 30 min. The heavy metals ions were removed and fixed on A-EMS mainly through ion exchange and some forms of electrostatic adsorption and hydroxyl complexation. After consolidating the heavy metals, the compressive strength of the materials can reach 20 Mpa and the leaching toxicity met the national standard of China (GB/T 3838-2002) in 60 days. These excellent properties made A-EMS widely used to remove heavy metals in wastewater and to intercept and solidify heavy metals in mine wastewater.

environmental sciences,engineering, environmental
Removal of hexavalent chromium from aqueous solution using low-cost magnetic microspheres derived from alkali-activated iron-rich copper slag

Yu Wei,Liang He,Zhongqiu Luo,Xintao Zhou,Zhijie Zhang,Yunlong Luo,Qin Liu

DOI: https://doi.org/10.1016/j.jece.2023.110436

IF: 7.7

2023-07-08

Journal of Environmental Chemical Engineering

Abstract:The utilization of iron-rich copper smelting waste residues is a promising method to treat chromium (Cr(VI)) contaminated wastewater. Improving its recoverability and adsorption efficiency in the adsorption process is the key to their effective utilization. Based on this, magnetic copper slag-based alkali-activated microspheres (CS-AAMs) with controllable particle size were prepared under the activation of sodium silicate by mechanical dispersion-suspension solidification method and used as an efficient low-cost magnetic adsorbent for Cr(VI) removal. The capability of CS-AAMs for Cr(VI) removal was investigated under different conditions. A maximum adsorption capacity of 32.5 mg/g was achieved at the pH of 1. The adsorption capacity can keep 89.25% after four cycles adsorption-desorption experiments. The adsorption process follows pseudo-first-order kinetics and occurs spontaneously with an endothermic nature. Both intraparticle diffusion and chemical complexation controlled the adsorption process. Notably, the electrostatic attraction between Cr(VI) and CS-AAMs played a key role in the adsorption of Cr(VI). The adsorbed Cr(VI) was complexed and partially reduced under the action of active Fe(II) species in CS-AAMs. The findings indicate that the CS-AAMs prepared in this study can efficiently adsorb Cr(VI) from industrial effluents.

engineering, chemical, environmental
Magnetic Biochar Derived from Fenton Sludge/CMC for High-Efficiency Removal of Pb(II): Synthesis, Application, and Mechanism

Zongwu Wang,Juan Guo,Junwei Jia,Wei Liu,Xinding Yao,Jinglan Feng,Shuying Dong,Jianhui Sun

DOI: https://doi.org/10.3390/molecules28134983

IF: 4.6

2023-06-25

Molecules

Abstract:Magnetic biochar composites (MBC) were developed by a simple one-step pyrolysis method using Fenton sludge waste solid and carboxymethyl cellulose sodium. Detailed morphological, chemical, and magnetic characterizations corroborate the successful fabrication of MBC. Batch adsorption experiments show that the synthesized MBC owns high-efficiency removal of Pb(II), accompanied by ease-of-separation from aqueous solution using magnetic field. The experiment shows that the equilibrium adsorption capacity of MBC for Pb(II) can reach 199.9 mg g−1, corresponding to a removal rate of 99.9%, and the maximum adsorption capacity (qm) reaches 570.7 mg g−1, which is significantly better than that of the recently reported magnetic similar materials. The adsorption of Pb(II) by MBC complies with the pseudo second-order equation and Langmuir isotherm model, and the adsorption is a spontaneous, endothermic chemical process. Investigations on the adsorption mechanism show that the combination of Pb(II) with the oxygen-containing functional groups (carboxyl, hydroxyl, etc.) on biochar with a higher specific surface area are the decisive factors. The merits of reusing solid waste resource, namely excellent selectivity, easy separation, and simple preparation make the MBC a promising candidate of Pb(II) purifier.

chemistry, multidisciplinary,biochemistry & molecular biology
Enhanced adsorption performance of alginate/MXene/CoFe2O4 for antibiotic and heavy metal under rotating magnetic field

Jianran Ren,Zhiliang Zhu,Yanling Qiu,Fei Yu,Tao Zhou,Jie Ma,Jianfu Zhao

DOI: https://doi.org/10.1016/j.chemosphere.2021.131284

IF: 8.8

2021-12-01

Chemosphere

Abstract:Improving the adsorption performance with simple and strong applicability has always been a research hotspot in water treatment. This study introduces sodium alginate/MXene/CoFe2O4 (SA/MX/CFO) as functional composite materials by sodium alginate cross-linking and as adsorbents in the removal of contaminations with an external magnetic field (MF). SA/MX/CFO beads exhibited excellent mechanical properties, with fracture stress of 1.64 MPa at 73.4%, and an elastic modulus of 2.23 MPa. The isotherm fitting chose Cu2+ and CIP as the model pollutants, the isotherm fitting shows that the adsorption capacity of CIP is significantly improved by 24.2%.The magnetic effect of the adsorption capacity of Cu2+ is not obvious, which indicated the selectivity for adsorption; however, the adsorption rates of CIP and Cu2+ are greatly improved by 359.76% and 371% respectively. Promoting materials transfer rate, changing of hydrogen bond, and surface functional group reactivity is the key to determine the adsorption enhancement with a rotating magnetic field (RMF). The combination of the external magnetic field and the inherent magnetic properties of the adsorbent can adjust the adsorption process and the selectivity of pollutants. It also provides an innovative and practical method for MF to remediate contaminants in the magnetically enhanced adsorption system.

environmental sciences
Synthesis and adsorption performance of carboxyl-functionalized magnetic agarose gel microspheres for Cu(II) removal

Mingze Ma,Guanglin Liang,Yi Ru,Jun Chen,Yonghui Zhang,Huifen Weng,Anfeng Xiao,Qiong Xiao

DOI: https://doi.org/10.1016/j.jece.2024.112582

IF: 7.7

2024-04-10

Journal of Environmental Chemical Engineering

Abstract:Succinic anhydride modified magnetic agarose microspheres (SA-MAM) were synthesized to develop a novel, high-performance, and highly efficient adsorbent for heavy metal ions. Fe 3 O 4 magnetic nanoparticles (MNPs) were prepared via chemical co-precipitation. Magnetic agarose microspheres (MAMs) with different particle sizes and fast magnetic separation rates were prepared using an emulsion embedding method. MAMs with high specific surface area (10 μm, MAM-10) and high magnetic responsiveness (125 μm, MAM-125) were surface functionalized with carboxyl groups by using succinic anhydride (SA) in a non-homogeneous system. The results demonstrated that SA-MAM-10 exhibited a maximum Cu(II) adsorption capacity of 128.8 mg/g. This value was 60.4% higher than that of MAM-10 (80.3 mg/g), approximately 67.1% higher than that of commercial Magarose-COOH (10–30 μm, 77.1 mg/g), and comparable with that of commercial Magarose-NH 2 (10–30 μm, 133.1 mg/g). By contrast, SA-MAM-125 maintained high magnetic responsiveness while achieving a maximum adsorption capacity of 76.3 mg/g, which was 21.7% higher than that of MAM-125 (62.7 mg/g) and surpassed the performance of Magarose-COOH (30–150 μm, 66.7 mg/g). Complete separation was achieved within 3 s under the influence of an external magnetic field. Overall, these two types of MAMs exhibited excellent performance in removing Cu(II) from water, highlighting their potential as adsorbents for wastewater purification.

engineering, chemical, environmental
Highly Efficient Co-Removal of Heavy Metals in Wastewater from Chemical Oxygen Demand Testing Instrument by Cysteine-Functionalized Magnetic Nanoparticles

Botai Cai,Pei Gu,Lixi Zeng,Ying Zhou,Qingju Liu,Xun Li,Longfei Yuan,Yujian He

DOI: https://doi.org/10.1007/s40242-014-3484-5

2014-01-01

Abstract:Wastewater discharged from chemical oxygen demand(COD) testing instrument was generally difficult to treat due to its high content of heavy metals and very low pH. In this study, a kind of cysteine-functionalized magnetic nanoparticles(MNPs-Cys) was synthesized and used to treat the wastewater. The synthesized MNPs-Cys as the adsorbent for heavy metal removal from aqueous solutions were systematically investigated. The adsorption dynamic process fit the Langmuir isotherms well with a maximum adsorption capacity of 76.92 mg/g for Cu(II). The adsorbent could be easily regenerated by 0.1 mol/L HNO3, which exhibited a high adsorption performance within 10 cycles. This adsorbent, combined with a developed pretreatment approach, could make Cr(III), Hg(II) and Ag(I) in the wastewater discharged from COD testing instrument effectively removed and the removal efficiency is more than 99%. This work gave a new insight into the design and synthesis of high-performance materials for treating wastewater with heavy metals.
Selective removal of Cu(II) ions by magnetic mesoporous silica with surface ion-imprinted quaternized Schiff base coating

Qiongxin Gou,Yiying Xiong,Yunqiong Yang,Yuqi Wu,Yuanyuan Zhang

DOI: https://doi.org/10.1007/s10971-024-06309-9

2024-02-24

Journal of Sol-Gel Science and Technology

Abstract:The highly selective capture and efficient utilization of recovered Cu(II) ions using a multifunctional material holds substantial practical significance. In this study, a novel type of magnetic adsorbent, MSBA-IIA, was successfully synthesized by grafting a Cu(II) ion-imprinted quaternized salicylaldehyde Schiff base coating onto the surface of magnetic mesoporous silica, aiming to enhance the recognition and separation selectivity for target ions during the adsorption process. Batch Cu(II) ion adsorption experiments demonstrated a dependence of adsorption efficiency on the solution pH level. The Cu(II) adsorption behavior onto MSBA-IIA followed the pseudo-second-order adsorption kinetic model and Langmuir isothermal model. MSBA-IIA exhibited a maximum adsorption capacity of 32.7 mg/g, surpassing that of the non-ion-imprinted counterpart MSBA-NIIA. Thermodynamic study unveiled the spontaneous and exothermic nature of the adsorption process. The relative separation factors α' of MSBA-IIA for Cu(II) were determined to be much more than 1, suggesting that the imprinted adsorbent exhibited superior selectivity for Cu(II) ions in the presence of other co-existing metal ions when compared to the MSBA-NIIA. Due to its magnetic collection and regenerable nature, the proposed approach holds promise for the selective removal of Cu(II) ions from water.

materials science, ceramics

A Magnetic Activated Sludge for Cu(ii) and Cd(ii) Removal: Adsorption Performance and Mechanism Studies

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

Preparation of smart magnetic fluids and application in sewage treatment: Copper adsorption, kinetic and isotherm study

Design of Magnetic Nanoparticles with High Magnetic Separation Efficiencies and Durability for Cu2+ Adsorption

Efficient Removal of Cu(II) and Citrate Complexes by Combined Permanent Magnetic Resin and Its Mechanistic Insights

Using deep eutectic solvent dissolved low-value cotton linter based efficient magnetic adsorbents for heavy metal removal

Highly selective and ultrafast removal of cadmium and copper from water by magnetic core-shell microsphere

Low-Cost magnetic adsorbent for efficient Cu(II) removal from water

Solvent-Free Synthesis of Magnetic Sewage Sludge-Derived Biochar for Heavy Metal Removal from Wastewater

Magnetic EDTA-modified chitosan/SiO2/Fe3O4 adsorbent: Preparation, characterization, and application in heavy metal adsorption

Magnetic recyclable biosorbents based on cotton cellulose and chitosan for copper(ii) removal from polluted water

Magnetic Chitosan/sodium Alginate Gel Bead As a Novel Composite Adsorbent for Cu(II) Removal from Aqueous Solution

Xanthate-Modified Magnetic Fe3O4@SiO2-Based Polyvinyl Alcohol/Chitosan Composite Material for Efficient Removal of Heavy Metal Ions from Water

Removal of cadmium from wastewater by magnetic zeolite synthesized from natural, low-grade molybdenum

A novel method for solidification/stabilization of Cd(II), Hg(II), Cu(II), and Zn(II) by activated electrolytic manganese slag

Removal of hexavalent chromium from aqueous solution using low-cost magnetic microspheres derived from alkali-activated iron-rich copper slag

Magnetic Biochar Derived from Fenton Sludge/CMC for High-Efficiency Removal of Pb(II): Synthesis, Application, and Mechanism

Enhanced adsorption performance of alginate/MXene/CoFe2O4 for antibiotic and heavy metal under rotating magnetic field

Synthesis and adsorption performance of carboxyl-functionalized magnetic agarose gel microspheres for Cu(II) removal

Highly Efficient Co-Removal of Heavy Metals in Wastewater from Chemical Oxygen Demand Testing Instrument by Cysteine-Functionalized Magnetic Nanoparticles

Selective removal of Cu(II) ions by magnetic mesoporous silica with surface ion-imprinted quaternized Schiff base coating