Abstract:A composite gel electrolyte, composed of a liquid electrolyte trapped in a polymer pentaerythritol tetraacrylate‐SiO2 matrix, formed in situ in the cell, is developed for high performance lithium metal batteries (LMBs). The introduction of the inorganic filler, SiO2, promotes Li+ transport and formation of Li+ solvation sheath structures of anionic aggregate domination and thus stable inorganic‐rich solid electrolyte interphase and cathode electrolyte interphase, leading to much improved electrochemical performances of the LMB. Lithium metal (LM) is a promising anode material for next generation lithium ion based electrochemical energy storage devices. Critical issues of unstable solid electrolyte interphases (SEIs) and dendrite growth however still impede its practical applications. Herein, a composite gel polymer electrolyte (GPE), formed through in situ polymerization of pentaerythritol tetraacrylate with fumed silica fillers, is developed to achieve high performance lithium metal batteries (LMBs). As evidenced theoretically and experimentally, the presence of SiO2 not only accelerates Li+ transport but also regulates Li+ solvation sheath structures, thus facilitating fast kinetics and formation of stable LiF‐rich interphase and achieving uniform Li depositions to suppress Li dendrite growth. The composite GPE‐based Li||Cu half‐cells and Li||Li symmetrical cells display high Coulombic efficiency (CE) of 90.3% after 450 cycles and maintain stability over 960 h at 3 mA cm−2 and 3 mAh cm−2, respectively. In addition, Li||LiFePO4 full‐cells with a LM anode of limited Li supply of 4 mAh cm−2 achieve capacity retention of 68.5% after 700 cycles at 0.5 C (1 C = 170 mA g−1). Especially, when further applied in anode‐free LMBs, the carbon cloth||LiFePO4 full‐cell exhibits excellent cycling stability with an average CE of 99.94% and capacity retention of 90.3% at the 160th cycle at 0.5 C.

Improved Li+ Diffusion Enabled by SEI Film in a High-Energy-density Hybrid Magnesium-Ion Battery

High Performance Hybrid Mg-Li Ion Batteries with Conversion Cathodes for Low Cost Energy Storage

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Engineering Stable SEI Film on Mg-Doped Li Metal Anode by Electrolyte Additive with High Donor-Number Anion for Li-S Batteries

Achievement of high-cyclability and high-voltage Li-metal batteries by heterogeneous SEI film with internal ionic conductivity/external electronic insulativity hybrid structure

A Sustainable Solid Electrolyte Interphase for High‐Energy‐Density Lithium Metal Batteries under Practical Conditions

Dynamical SEI Reinforced by Open‐Architecture MOF Film with Stereoscopic Lithiophilic Sites for High‐Performance Lithium–Metal Batteries

An Improved Li–SeS2 Battery with High Energy Density and Long Cycle Life

Manipulating Electrolyte and Solid Electrolyte Interphase to Enable Safe and Efficient Li-S Batteries

Sulfurized Solid Electrolyte Interphases with a Rapid Li+ Diffusion on Dendrite-Free Li Metal Anodes

Self-Formed Hybrid Interphase Layer on Lithium Metal for High-Performance Lithium-Sulfur Batteries.

Engineering a high-capacity and long-cycle-life magnesium/lithium hybrid-ion battery using a lamellar SnSe2/SnSe/SnO2 cathode

MXene and silk fibroin peptide team up to build a 1+1>2 in situ SEI film

Intercalation-conversion hybrid cathodes enabling Li–S full-cell architectures with jointly superior gravimetric and volumetric energy densities

Organosulfide-plasticized Solid-Electrolyte Interphase Layer Enables Stable Lithium Metal Anodes for Long-Cycle Lithium-Sulfur Batteries.

Revealing the electrochemical mechanism of the conversion-type Co3S4 in a novel high-capacity Mg-Li hybrid battery

Inorganic Filler Enhanced Formation of Stable Inorganic‐Rich Solid Electrolyte Interphase for High Performance Lithium Metal Batteries

A Metal__rganic-Framework-Based Electrolyte with Nanowetted Interfaces for High-Energy-Density Solid-State Lithium Battery

0D-2D multifunctional bimetallic MOF derivative-MXene heterojunction for high areal capacity lithium-sulfur batteries

Enhancing the Reversibility of Mg/S Battery Chemistry Through Li(+) Mediation.