Abstract:The large-scale construction of railway tunnels in China is hindered by several challenges, including large depths, large tunnel cross-sections, and fragile geological conditions. In this paper, we explored a new physical and numerical simulation method that improves upon the currently used methods to investigate the deformation and failure modes of weak rocks surrounding a tunnel. We also compared the results from physical tests and numerical simulations with the field measurements to demonstrate the effectiveness of the proposed numerical simulation method. In the physical model test, an artificial speckle field was developed by staining quartz sand particles and mixing the particles with barite powder and petroleum jelly in preset proportions. The artificial speckle field was employed in the digital speckle correlation method (DSCM) to monitor the evolution of the strain field on the surface of the plain strain model for tunneling during loading. A secondary strain-softening constitutive model using the numerical modeling code FLAC3D was developed (degradation constitutive model) by considering the deformation modulus degradation in the numerical simulation. The failure mode of weak rocks surrounding a tunnel in the physical model test was examined using the developed degradation constitutive model. Both the physical and numerical results revealed that the least stable area was the shear wedge along the minimum principal stress, which was confirmed in the damage zone of the surrounding rocks. The results were consistent with previous research findings. The results of the DSCM in the physical model test indicated that the shear wedge in the middle part of the tunnel and the cracks around the arch of the tunnel were induced by shear strain, whereas the collapse of the arch was attributed to a combination of tensile strain and shear strain. A comparison of the physical and numerical simulation results demonstrated that the degradation constitutive model can be used to describe the extent and depth of the excavation damage zone of tunneling. A comparison of the displacements from the numerical simulation and field measurements indicated that the degradation model can be used to capture the displacement of weak rocks surrounding tunnels.

Large-scale Model Experiment and Numerical Simulation on Convergence Deformation of Tunnel Excavating in Composite Strata

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Physical Experiment and Numerical Modelling of Tunnel Excavation in Slanted Upper-Soft and Lower-Hard Strata

A physical and numerical investigation of the failure mechanism of weak rocks surrounding tunnels

Physical modelling of deformation and failure mechanisms and supporting effects for a deep-buried tunnel in inclined layered strata

Model Test Study on the Failure Evolution of Surrounding Rock for Deep Tunnel Engineering

Model Test on Failure and Control Mechanism of Surrounding Rocks in Tunnels with Super Large Sections

Model Test Study on Spatial Deformation Law of Surrounding Rock for Super-Large Section and Shallow Buried Tunnels

Physical Modeling Experimental Study on Failure Mechanism of Surrounding Rock of Deep-Buried Soft Tunnel Based on Digital Image Correlation Technology

Experimental Investigation on Surrounding Rock Stress and Deformation Rule of TBM Tunneling in Deep Mixed Strata

Model test study on large deformation mechanism of thin-bedded metamorphic sandstone tunnel

Experimental Study on Deformation Failure Mechanism of Surrounding Rocks for the Deep-Buried Twin Tunnels in Inclined Layered Strata During the Excavation

A Meso/Macroscale Theoretical Model for Investigating the Large Deformation of Soft Rock Tunnels Considering Creep and Anisotropic Effects

Mechanical Response Features and Failure Process of Soft Surrounding Rock Around Deeply Buried Three-Centered Arch Tunnel

Time-dependent Deformation Analysis of the Surrounding Rock Mass Around a Tunnel

3D Finite Element Simulation of Tunnel Boring Machine Construction Processes in Deep Water Conveyance Tunnel

Numerical modeling of open TBM tunneling in stratified rock masses using a coupled FDM-DEM method

Large Deformation of Tunnels in Longwall Coal Mines

Analysis and countermeasures of large deformation of deep-buried tunnel excavated in layered rock strata:A case study

Numerical Analysis of Surrounding Rock Stability in Super-Large Section Tunnel Based on Hydro-Mechanical Coupling Model