Abstract:Nanothermites possess much attentions relying on potential probability to the fields of the military and civilian. Whereas, the practical applications for nanothermites have been limited by the high electrostatic discharge (ESD) sensitivity and little gas generation, which is a pronounced problem in the microthruster particularly. In this work, the two typical nanothermites (Al/CuO and Al/MoO3, as Al/MXOY) were assembled with various contents of CL-20 to be defined Al/MXOY@CL-20. The characteristics of Al/MXOY@CL-20 were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), powder X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The ignition properties of Al/MXOY@CL-20, such as burning rate, the unrestrained combustion, ignition temperature, delay time, pressurization and propulsion properties, were studied. In addition, the energy required for 50% ignition probability (E-50) was applied to evaluating the sensitivity of Al/MXOY@CL-20 to ESD. Results revealed that the total heat release for Al/MXOY@CL-20 was increased on account of CL-20, and CL-20 facilitated the transformation of CuO to Cu2O. The burning rates decreased with the increase of CL-20, whereas the burning rate of Al/MoO3@10%CL-20 was little higher than that of Al/MoO3. Al/CuO@10%CL-20 and Al/MoO3@30%CL-20 exhibited superior performances respectively for the maximum flame area, the lowest ignition temperature, the highest pressurization rate and specific impulse. The particular significance was that CL-20 played a positive role for Al/MXOY@CL-20 on the safety to ESD. For instance, the E-50 of Al/CuO@50%CL-20 was 163.84 mJ meanwhile Al/CuO of that was 0.24 mJ. In conclusion, in the light of the superior specific impulse and the excellent safety to ESD, Al/MXOY@CL-20 (especially Al/CuO@10%CL-20 and Al/MoO3@30%CL20) would possess the remarkable application prospects for practice in the microthruster. (c) 2022 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Incorporation of High Explosives into Nano-Aluminum Based Microspheres to Improve Reactivity

Tailoring Structural Energetics for Enhanced Reactivity of Nano‐Aluminum Particles Based Microspheres

Construction of Hollow Heterogeneous Microspheres Containing Energy Storage Fibers by Electric Spray to Promote Combustion of Nano Aluminum

Nested Core-Shell Electrosprayed Microspheres: A Potential Assembly with Synergetic Interface for Energy Release

High-quality and Homogeneous HMX-based Aluminized Explosives Using Droplet Microfluidic Technology

Using microfluidic technology to prepare octogen high-energy microspheres containing copper-aluminum composite particles with enhanced combustion performance

Preparation and Energy Release Properties of Nb@f2603@cl-20 Microspheres by Electrospray

Microfluidic assisted 90% loading CL-20 spherical particles: Enhancing self-sustaining combustion performance

Facile Preparation and Synergetic Energy Releasing of Nano-Al@rdx@viton Hollow Microspheres

In Situ Preparation of Explosive Embedded CuO/Al/CL20 Nanoenergetic Composite with Enhanced Reactivity

A Promising Strategy to Obtain High Energy Output and Combustion Properties by Self-Activation of Nano-Al

Improved Combustion Performance of Fluororubber-Coated Micro-Nano Composite Aluminum Powder

Improved ignition and combustion performances of aluminum nanoparticles by in-situ partial conversion of native alumina to surface Al-MOF shell

Enhancing the Mechanical and Energy Release Performance of Nano-Aluminum@fluororubber (nal@f2311) Core–shell Microstructured Composite Materials

An Excellent Synergy Between CL-20 and Nanothermites in Flaming and Propelling with High Specific Impulse and Superior Safety to Electrostatic Discharge

Preparation and Characterization of nAl@PVDF@CL-20 Composite Energetic Particles Assembled via Microfluidic Method

Atomic Insight into the Agglomeration Evolution Mechanism of Aluminum Nanoparticles with Core-Shell Structure

Thermal Shock Triggers Microexplosion Combustion in Graded Fuel and Oxidizer Encapsulation Microspheres with Improved Combustion Efficiency

Controlling the Energy Release Behavior of Aluminum Nanoparticles As Metal Fuels by Atomic Layer Deposited Copper Oxide Nanocoatings

Crystal phase control and ignition properties of HNS/CL-20 composite microspheres prepared by microfluidics combined with emulsification techniques

Influence of the Hierarchy Structure of Aluminum Particles on Density, Combustion Efficiency, and Ignition Delay