Combustion and agglomeration characteristics of aluminized propellants containing Al/CuO/PVDF metastable intermolecular composites: A highly adjustable functional catalyst
Wen Ao,Zhan Wen,Lu Liu,Yang Wang,Yu Zhang,Peijin Liu,Zhao Qin,Larry K.B. Li
DOI: https://doi.org/10.1016/j.combustflame.2022.112110
IF: 4.4
2022-07-01
Combustion and Flame
Abstract:In this experimental study, we explore how the combustion and agglomeration characteristics of solid propellants can be modified by replacing aluminum with ternary Al/CuO/PVDF(Polyvinylidene Fluoride) metastable intermolecular composites (MICs). Using thermogravimetric−differential scanning calorimetry, a laser ignition setup, and a high-pressure propellant combustion system, we examine the thermal reactivity, ignition behavior, burning rate, agglomeration, and condensed combustion products of various MICs-inclusion propellants. We find that the use of ternary Al/CuO/PVDF MICs can decrease the onset temperature and increase the oxidation efficiency of Al, as compared with common binary MICs. The ratio of CuO/PVDF is found to have a strong effect on the combustion intensity of the metallic powders, but only a weak effect on their ignition delay. Higher proportion of PVDF is found to have a negative effect on the combustion rate. Specifically, the combustion intensity is found to decrease first and then increase as the PVDF content increases. The exothermic Al/CuO reaction is found to alter the heat transfer of the condensed layer on the propellant surface, while PVDF plays a critical role in the thermal feedback of the gaseous reaction. When combined, these two factors lead to a ± 30% variation in the propellant burning rate. Furthermore, ternary MICs are found to reduce agglomeration during propellant combustion. The two optimal formulations are 2.5 wt.% CuO/2.5 wt.% PVDF and 3.5 wt.% CuO/1.5 wt.% PVDF. The use of these formulations is found to decrease the mean particle size of the condensed combustion products to only 11 μm, as compared with 76 μm for the original Al-inclusion propellant. High-speed microscope images reveal the existence of crack phenomena in the pockets surrounding the AP particles on the burning surface due to the Al/CuO reaction, as well as the floccule breakup mechanism of Al aggregates in the presence of PVDF, both of which reduce agglomeration. Overall, this study shows that replacing Al with ternary Al/CuO/PVDF MICs has significant effects on the agglomeration, combustion and ignition features of aluminized propellants. The findings of this study can be used to aid the development of highly adjustable functional catalysts for solid propellants.
energy & fuels,engineering, chemical, mechanical,thermodynamics, multidisciplinary