Abstract:Background: Metallic implants such as titanium are much harder than the neighboring bone. This high difference may generate larger stress at the bone-implant interface during load transfer which leads to implant failure. The use of biocompatible polymer such as CRF-polyether ether ketone (PEEK) with strength comparable with the bone might lead to lower and better stress distribution to the supporting peri-implant bone. Purpose: The aim of this study is to investigate the effect of using carbon reinforced PEEK composite material for fixture/abutment on stress distribution in peri-implant bone. Materials and methods: Three-dimensional (3D) model of dental implant placed in the first mandibular molar is constructed from computed tomography scan. Five distinct models using a combination of titanium, CRF-PEEK, lithium disilicate for implant/abutment materials are studied. 3D finite element analysis (FEA) is used to evaluate the stress distribution at implant-bone interface under excessive oblique load. The physical interaction between several contacting bodies is numerically investigated. The effect of friction coefficients between the indenter and occlusal surface and between the implant and peri-implant bone is determined. Results: FEA results show that there is no significant difference in the distribution pattern of stress at implant-bone interface among the different material models studied. The highest maximum and lowest minimum principal stresses were always located in the cortical bone and never in the cancellous bone which is consistent with the existing literature. Off-axis loading can result in unfavorable forces on the implant, jeopardizing the long-term success because of excessive lateral loads. Current FEA results agree with previously published work. Conclusion: Substitution of titanium implant by PEEK implant does not provide any advantages in regards to better stress distribution to the peri-implant bone. The strain thresholds of Frost's mechanostat theory that are suitable for long bone could not be applied for alveolar bone.

Effect of PEEK and PTFE coatings in fatigue performance of dental implant retaining screw joint: An in vitro study

Effect of different biocompatible implant materials on the mechanical stability of dental implants under excessive oblique load

Influence of surface coatings on the stress distribution by varying friction contact at implant-bone interface using finite element analysis

The Effects of using PEEK Coping and Different Restorative Materials on the Stress Distribution in Tooth and Implant- supported Prostheses under Static Loading: 3D FEA

Biomechanical Effects of Titanium and Carbon Fiber Reinforced PEEK as Dental Implant Material: A Finite Element Analysis

Patient outcome following inpatient vs outpatient treatment of rheumatoid arthritis.

Evaluation of the use of PEEK material in implant-supported fixed restorations by finite element analysis

Effect of surface modification on the long-term stability of dental implant abutment screws by plasma nitriding treatment

Fretting Wear Study of PEEK-Based Composites for Bio-implant Application

Biological and Biomechanical Behavior of Titanium Implants with Fluoridated Hydroxyapatite Coatings

A Three – Dimensional Finite Element Analysis of Polyetheretherketone PEEK in Dental Implant Prosthesis: A Novel Implant System

Study on the Tribological Behaviors of Different PEEK Composite Coatings for Use As Artificial Cervical Disk Materials

Diamond-Like Carbon Coating Reduces Connection Screw Head Stripping After Multiple Tightening Instances

Climatic Fluctuations Due to Deep Ocean Circulation

Carbon fiber-reinforced PEEK in implant dentistry: A scoping review on the finite element method

Influence of prosthetic index structures and implant materials on stress distribution in implant restorations: a three-dimensional finite element analysis

Three-Dimensional Finite Element Analysis of Stress Distribution in Dental Implant Prosthesis and Surrounding Bone Using PEEK Abutments

Wear Resistance, Cytotoxicity and Antibacterial Properties of Polyetheretherketone Composite Modified by Carbon Fiber and Black Phosphorus

The effects of design parameters on mechanical failure of Ti-6Al-4V implants using finite element analysis

Distribution of serotonin-, Gamma-Aminobutyric Acid- and substance P-like immunoreactivity in the central and peripheral nervous system of Mytilus galloprovincialis.

Mechanical performance of PEEK-Ti6Al4V interpenetrating phase composites fabricated by powder bed fusion and vacuum infiltration targeting large and load-bearing implants