Abstract:During the variable spray process, the micro-flow control is often held back by such problems as low initial sensitivity, large inertia, large hysteresis, nonlinearity as well as the inevitable difficulties in controlling the size of the variable spray droplets. In this paper, a novel intelligent double closed-loop control with chaotic optimization and adaptive fuzzy logic is developed for a multi-sensor based variable spray system, where a Bang-Bang relay controller is used to speed up the system operation, and adaptive fuzzy nonlinear PID is employed to improve the accuracy and stability of the system. With the chaotic optimization of controller parameters, the system is globally optimized in the whole solution space. By applying the proposed double closed-loop control, the variable pressure control system includes the pressure system as the inner closed-loop and the spray volume system as the outer closed-loop. Thus, the maximum amount of spray droplets deposited on the plant surface may be achieved with the minimum medicine usage for plants. Multiple sensors (for example: three pressure sensors and two flow rate sensors) are employed to measure the system states. Simulation results show that the chaotic optimized controller has a rise time of 0.9 s, along with an adjustment time of 1.5 s and a maximum overshoot of 2.67% (in comparison using PID, the rise time is 2.2 s, the adjustment time is 5 s, and the maximum overshoot is 6.0%). The optimized controller parameters are programmed into the hardware to control the established variable spray system. The experimental results show that the optimal spray pressure of the spray system is approximately 0.3 MPa, and the flow rate is approximately 0.08 m3/h. The effective droplet rate is 89.4%, in comparison to 81.3% using the conventional PID control. The proposed chaotically optimized composite controller significantly improved the dynamic performance of the control system, and satisfactory control results are achieved.

Motion Control of Spraying Robot System Based on Identification Information of End Sensor

Design and Functional Verification of a Robot Motion Sensor

Control Parameters Design of Spraying Robots Based on Dynamic Feedforward

Kinematics Modeling and Analysis of a Novel Five-DoF Spraying Robot

Research on motion planning for an indoor spray arm based on an improved potential field method

The Kinematics Simulation and Analysis of a New Spraying Robot Based on ADAMS

Semantic Segmentation Based Spraying Trajectory Planning for Complex Product

Rocket Tank Surface Glue Layer Thickness Measurement Robot Trajectory Tracking Control Based on Adaptive Iterative Learning

Variable-Rate Spraying Control System Based on Fuzzy Control

An Engineering-Oriented Motion Accuracy Fluctuation Suppression Method of a Hybrid Spray-Painting Robot Considering Dynamics

Research on the Direct Teaching Method of Robot Based on Admittance Control

An Intelligent Multi-Sensor Variable Spray System with Chaotic Optimization and Adaptive Fuzzy Control

The Angle Adjustment Method of the Cleaning End Effector for the Surface of Rocket Tank Based on Machine Vision

Design and Experiment of the Control System for Automatic Rocket-attaching Module of Auto-docking and Auto-separating Robot for Launch Vehicle Propellant Loading

Control and Dynamic Simulation of Wire-Driven Precise Spray Robotic Arm

Research on the identification method of interactive guiding movement by the end sensor of robot

Coordinated Motion Control of A Dual-Arm Space Robot with Joint-Limit Avoidance and Uncertain Inertial Parameters

Design of Feedback Variable Rate Spraying System Based on ARM

An Integrated System of Detecting End-Effector Motion States and Wafer Stick-Slip on A Wafer Transfer Robot

Embedded Design of Automatic Pesticide Spraying Robot Control System

Research On Control System Of A Wheeled Robot For Fire Inspection Based On Autonomous Vision Navigation