Abstract:A novel approach is proposed for the path tracking of a Wheeled Mobile Robot (WMR) in the presence of an unknown lateral slip. Much of the existing work has assumed pure rolling conditions between the wheel and ground. Under the pure rolling conditions, the wheels of a WMR are supposed to roll without slipping. Complex wheel-ground interactions, acceleration and steering system noise are the factors which cause WMR wheel slip. A basic research problem in this context is localization and slip estimation of WMR from a stream of noisy sensors data when the robot is moving on a slippery surface, or moving at a high speed. DecaWave based ranging system and Particle Filter (PF) are good candidates to estimate the location of WMR indoors and outdoors. Unfortunately, wheel-slip of WMR limits the ultimate performance that can be achieved by real-world implementation of the PF, because location estimation systems typically partially rely on the robot heading. A small error in the WMR heading leads to a large error in location estimation of the PF because of its cumulative nature. In order to enhance the tracking and localization performance of the PF in the environments where the main reason for an error in the PF location estimation is angular noise, two methods were used for heading estimation of the WMR (1): Reinforcement Learning (RL) and (2): Location-based Heading Estimation (LHE). Trilateration is applied to DecaWave based ranging system for calculating the probable location of WMR, this noisy location along with PF current mean is used to estimate the WMR heading by using the above two methods. Beside the WMR location calculation, DecaWave based ranging system is also used to update the PF weights. The localization and tracking performance of the PF is significantly improved through incorporating heading error in localization by applying RL and LHE. Desired trajectory information is then used to develop an algorithm for extracting the lateral slip along X- and Y-axis from the PF estimated position of the WMR, the lateral slip along X- and Y-axis is then used to take some corrective measures. Lateral slip information is also used to find the direction along which WMR has to move to get back along the desired trajectory. Simulation results show that our proposed LHE and RL heading estimation methods significantly improve the PF localization and tracking performance on a slippery surface in both indoor and outdoor environments. The simulation results also show that the accurate locations of WMR and desired path information are used to estimate and compensate the lateral slip.

An Integrated System of Detecting End-Effector Motion States and Wafer Stick-Slip on A Wafer Transfer Robot

End-effector Contact Force Estimation for the Industrial Robot in Automated Fiber Placement Processes with Dynamic End-Load Variations

Robust Force Tracking Impedance Control of an Ultrasonic Motor-actuated End-effector in a Soft Environment.

Adaptive Control of Vertical Stage of A Robot Arm for Wafer Handling

A New Friction Estimation Approach for Precision Positioner

A Robust Localization, Slip Estimation, and Compensation System for WMR in the Indoor Environments

Online Path Correction under End Point Nonholonomic Constraints – Implementation with Visual Sensing in Robotic Fiber Placement

Beyond End-Effector: Utilizing High-Resolution Tactile Signals for Physical Human–Robot Interaction

A Novel Tactile Sensor with Electromagnetic Induction and Its Application on Stick-Slip Interaction Detection

Flexible Tactile Sensor Array for Distributed Tactile Sensing and Slip Detection in Robotic Hand Grasping

Flexible Tactile Sensor Array for Slippage and Grooved Surface Recognition in Sliding Movement

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Slip Detection in Prosthetic Hand Grasping by Using the Discrete Wavelet Transform Analysis

Contact Detection by Probabilistic Model Fusion for Hydraulic Quadruped Robots

A Robust Incipient Slip Detection Method with Vision-Based Tactile Sensor Based on Local Deformation Degree

Incipient Slip Detection by Vibration Injection into Soft Sensor

Multifunctional biomimetic tactile system via a stick-slip sensing strategy for human–machine interactions

Incipient Slip Detection Method With Vision-Based Tactile Sensor Based on Distribution Force and Deformation

Adaptive EKF enhanced fault diagnosis and fault tolerant control for space manipulators with position measurements only

Automatic precision robot assembly system with microscopic vision and force sensor

Slip Detection and Recovery for Quadruped Robots Via Orthogonal Decomposition