Abstract:Stability of a bulk-optical resonator is a very important factor in the cavity analysis. The stability of a resonator depends on the properties and arrangement of the optical components, basically the curvature of reflecting surfaces, other focusing effects, and the distances between the components. When a parameter such as cavity length or the radius of curvature of the focusing element in the resonator is varied, the cavity stability also changes. This paper presents a concise and very simplified design and modeling of a 'L' shaped cavity, with reflecting and refracting elements along with two curved mirrors (cavity mirrors) using ABCD matrix and also the importance of an optical element used in L-cavity. The stability is calculated from the ABCD matrix and analyzed using cavity parameters like cavity length and radius of curvature. The stability of the L-cavity is analyzed by varying the length of the cavity from 100 mm to 1500 mm. The L-cavity is stable up to 1500 mm for mirror as intra cavity element and is stable beyond 1500 mm also for TIR (Total internal reflection) prism as intra cavity element. Similarly, the radius of curvatures of mirror and prism also varied from 100 mm to 2500 mm. The L-cavity is stable from 300 mm in mirror case and further also. The L-cavity is stable from 100 mm in TIR prism case and further also. The power distribution of laser beam is also simulated and analyzed for both mirror and TIR prism L-cavity using ZEMAX tool in non sequential mode. From the stability point and other properties of an optical element used in the L-cavity, the importance of the mirror and TIR prism is also studied and also which optical element is preferred for further ring cavity applications.

Flexible Degenerate Cavity with Ellipsoidal Mirrors.

Degenerate Cavity Supporting More Than 31 Laguerre-Gaussian Modes.

Engineering Waveguide-Cavity Resonant Side Coupling in A Dynamically Tunable Ultracompact Photonic Crystal Filter

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

Polarization Nondegenerate Fiber Fabry-Perot Cavities with Large Tunable Splittings

High-quality-factor planar optical cavities with laterally stopped, slowed, or reversed light

Low Noise Near-Concentric Optical Cavity Design

Tailoring Mode Splitting and Degeneracy in Silicon Triply Resonant Nanobeam Cavities

Generation of a Mode-Tunable Optical Vortex Based on a Mirror Curvature Dynamically Controlled Z-shaped Resonant Cavity

A hemispherical, high-solid-angle optical micro-cavity for cavity-QED studies

Anomalous Optical Whispering-Gallery Mode Induced by Rotational Symmetry Breaking

Chiral Flat-Band Optical Cavity with Atomically Thin Mirrors

Resonant behavior and stability of a linear three-mirror cavity

Design of L-cavity using refractive and reflective elements

Flexure-tuned membrane-at-the-edge optomechanical system

Optimized dielectric mirror coating designs for quasi-harmonic cavity resonance

Non-Hermitian Waveguide Cavity QED with Tunable Atomic Mirrors

Cavity Optomechanical Coupling Assisted by an Atomic Gas

Birefringent whispering gallery cavities designed by linear transformation optics

Chiral Symmetry Breaking in a Microring Optical Cavity by Engineered Dissipation