Abstract:In this paper, a bilateral prediction and intersection calculation autofocus method for automated microscopy, which obtains the in-focus position by calculating the intersection of the predicted left and right focus measure curves located respectively in the left and right sides of the peak position of the focus measure curve, is proposed and performed. According to the autofocus method, the area including the peak position of the focus measure curve and its left and right neighbourhoods should be determined firstly, and the left and right neighbourhoods are considered as the left and right sampling areas. The left and right focus measure curves are predicted by appropriate predicting models according to the two sample sequences, which comprise the focus values by evaluating the sampled images in the left sampling area and right sampling area, respectively and their corresponding sampling positions. The intersection of the predicted left and right focus measure curves is calculated and can be considered as the in-focus position. The autofocus can be realized by moving the focus plane of the microscope to the intersection of the predicted left and right focus measure curves. The proposed bilateral prediction and intersection calculation autofocus method is experimentally verified in an automated light microscopy for implementing microassembly and micromanipulation. The theoretical analyses have shown that the proposed bilateral prediction and intersection calculation autofocus method can not only effectively avoid the principle error caused by assuming the symmetrical focus measure curve in the autofocus methods based on curve fitting, but also eliminate the possible waver search near the peak position in the modified fast climbing servo method. The experimental results have shown that the proposed bilateral prediction and intersection calculation autofocus method possesses the merits as follows: (1) the focusing accuracy is high and slightly affected by the sampling step size and (2) the focusing speed is higher than those of the 7-point hill-climbing search method and the quadratic curve fitting method with a determinate focusing accuracy.

Adaptive Predictive Scanning Method Based on a High-Precision Automatic Microscopy System.

High-accuracy Differential Autofocus System with an Electrically Tunable Lens.

Image Scanning Fluorescence Emission Difference Microscopy Based On A Detector Array

Machine learning guided rapid focusing with sensor-less aberration corrections.

Method of Improving Autofocus Speed Based on Defocus Estimation

A Sensorless Adaptive Optics Control System for Microscopy Based on Extreme Learning Machine

An Aerial Focusing Method Based On Focusing Window Selection And Variable Threshold Focusing Evaluation Function In Frequency Domain

Bilateral Prediction And Intersection Calculation Autofocus Method For Automated Microscopy

Design of Optimal Fast Scanning Trajectory for the Mechanical Scanner of Measurement Instruments

TSP Solution for Adaptive Scanning Paths in Long-Range SPM Measurements

Study on Auto—focusing of Laser Scanning Confocal Microscopy

Microscopic Vision Based on the Adaptive Positioning of the Camera Coordinate Frame

Learning to High-Performance Autofocus Microscopy with Laser Illumination

An Optimized Scanning-Based AFM Fast Imaging Method

Improving the Performances of Autofocus Based on Adaptive Retina-Like Sampling Model

A Rate Adaptive Control Method for Improving the Imaging Speed of Atomic Force Microscopy.

A fast auto-focusing method of microscopic imaging based on an improved MCS algorithm

An autofocus algorithm for microscopic hyperspectral imaging system with adaptive wavelength variation.

Autofocus Methods For Automated Microscopy

A High Precision Laser-Based Autofocus Method Using Biased Image Plane for Microscopy

DeepFocus: fast focus and astigmatism correction for electron microscopy