Abstract:Suspension effect poses a big threat to the integrity and safety of corroded pipelines. In this work, a finite element (FE) based multi-physics field coupling model was developed to determine the mechano-electrochemical (M-E) interaction at an external corrosion defect on a suspended X100 steel pipe and predict its failure pressure. Theoretical calculations were used for model validation. Parameter effects including the defect location on the pipe, geometry of the defect, suspension length and pipe burial depth were determined. Results demonstared that, generally, the M-E effect at corrosion defect caused an increased stress concentration and anodic current density (i.e., corrosion rate), decreasing the failure pressure of the pipeline. The effect became more apparent when the pipe was in suspension. Both the stress and the anodic current density at the corrosion defect were dependent on the defect geometry, especially the defect depth. When the depth was up to 40% of pipe wall thickness, the von Mises stress exceeded the yield stress of the steel, causing local plastic deformation. A critical defect length of <math>20Dt</math> (D is the outer diameter of the pipe and t is pipe wall thickness) existed, below which the von Mises stress and the anodic current density at the corrosion defect increased with increased defect length. When the defect length exceeded the critical value, the effect was not obvious. An increased suspension length of the pipe would elevate the local stress and anodic current density at the corrosion defect, reducing the failure pressure of the pipe. A critical pipe burial depth of 2.5 m was identified, exceeding which the failure pressure of the pipe decreased rapidly with the increased burial depth. When the burial depth was smaller than 2.5 m, the effect was marginal. The location of the corrosion defect on the pipe did not affect the local stress, anodic current density and failure pressure at an appreciable level, and could be ignored in defect assessment on suspended pipelines.

Ratcheting Behavior of Pressurized Corroded Straight Pipe Subjected to Cyclic Bending

Bending Ratcheting Behavior of Pressurized Straight Z2CND18.12N Stainless Steel Pipe

Ratcheting Behavior of Pressurized Lateral Nozzle of Cylinder with Local Wall Thinning under Different Loading Paths

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Double Circular Arc Model Based on Average Shear Stress Yield Criterion and Its Application in the Corroded Pipe Burst

Ratcheting Limit Assessment of Straight Pipes Subjected to Combinedinternal Pressure and Reversed Bending Moments.pdf

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

Investigation of ratcheting fatigue behavior and failure mechanism of 1Cr18Ni10Ti pressure pipe under different force amplitudes and internal fluid pressure

On Instability Failure of Corroded Rings under External Hydrostatic Pressure

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Chen, Weihang and Chen, Haofeng and Li, Tianbai and Ure, James Michael (2011) Limit, shakedown and ratchet analyses of defective pipeline under internal pressure and cyclic thermal loading. In: ASME Pressure Vessels

Study of Ratchet Limit and Cyclic Response of Welded Pipe

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

Limit, Shakedown and Ratchet Analyses of Defective Pipeline under Internal Pressure and Cyclic Thermal Loading

Analytical prediction of failure pressure for pipeline with long corrosion defect

Comprehensive Numerical Study on Shakedown and Ratchetting Behaviours of a Deteriorated 90° Back-to-back Pipe Bends

The Whole-Life Ratcheting Behavior of Internal Pressurized Elbow Subjected to Force and Displacement Cycling with a Damage-Coupled Kinematic Hardening Model

Effect of chord-cut defects on the collapse response of thick-walled pipelines

Experimental study on the compression mechanical behaviour of steel pipes with mechanically induced pitting corrosion

Modeling of mechano-electrochemical interaction at a corrosion defect on a suspended gas pipeline and the failure pressure prediction

Behaviour of reinforced thermoplastic pipe under combined bending and external pressure