Abstract:Wearable electronics are one of the most rapidly growing industries, due to their extended use in everyday applications resulting in an increased demand for portable energy storage devices. Despite immense success in commercialization of Lithium-ion batteries (LIBs), conventional LIBs suffer from issues of cost and safety. The expanding need for cheaper, and safer energy storage devices led explorations towards alternatives. After careful considerations, Zinc (Zn)-Manganese dioxide (MnO 2 ) based alkaline system was chosen to be investigated in this work due to its low cost, inherent safety, and high theoretical energy density. However, challenges associated with making the aforementioned system rechargeable and highly performing still remains. The work in this study is directed towards enhancing the overall performance of the Zn-MnO 2 alkaline battery in addition to making it suitable for flexible and wearable applications. A highly ionically conducting polymer electrolyte ({5}CP) with excellent physical and electrochemical stability primarily comprising biopolymer chitosan is prepared by using a time and energy-efficient technique. Incorporation of this polymer electrolyte with Zn anode and MnO 2 cathode enabled the successful preparation of a physically flexible cell. To obtain high cyclability and performance of the system; issues of inactive phase formations (Mn x O y , ZnMn x O y ), low active material availability, pronounced shape changes at the anode surface, and zincate ion transfer towards cathode were overcome by enhancing the electrochemically active layers in the system. The assembled cell comprising the enhanced fabricated layers; (i.e. a Zinc/Stainless steel mesh composite anode, a hierarchical binder-free bismuth and copper additives based MnO 2 cathode, and a chitosan-based polymer electrolyte with calcium hydroxide additive) indicated excellent rate capabilities (486 mAh/g @ 0.1 A/g, 78% of the theoretical 2-electron capacity on MnO 2 ), long cycling stabilities (70% retention over 1000 cycles), and good energy densities (155 – 400 Wh/kg @ 0.1 – 1 A/g). Moreover, a number of destructive tests such as being bent, hammered, pressurized, and punctured were conducted on the pouch cell fabricated using the above-mentioned layers to analyze the cells' safety, reliability, and robustness. Results indicated not much deterioration in capacities. Additionally, when the cell was bent and tested for long performance; a stable discharge capacity (270 mAh/g @ 1 A/g) was obtained after 250 cycles, thus attesting to excellent cycling stability. The successful working of the fabricated cell was validated by lighting up an LED. The successful findings presented in this study can chart new pathways to the development of safe, flexible, cost-effective, and more environmentally responsible alternative energy storage sources for wearables.

A High-Performance Flexible Aqueous Al Ion Rechargeable Battery with Long Cycle Life

Rechargeable quasi-solid-state aqueous hybrid Al3+/H+ battery with 10,000 ultralong cycle stability and smart switching capability

(Invited) Flexible and Safe Zinc Alkaline Solid-State Rechargeable Battery for Wearable Applications

Paper-based aqueous Al ion battery with water-in-salt electrolyte

Flexible quasi-solid-state sodium-ion full battery with ultralong cycle life, high energy density and high-rate capability

Wearable Bipolar Rechargeable Aluminum Battery

High-Performance flexible Quasi-Solid-State aqueous Nickel-Iron battery enabled by MOF-Derived N -Doped carbon hollow nanowall arrays

Tailoring Interface to Boost the High‐Performance Aqueous Al Ion Batteries

A Class of Liquid Anode for Rechargeable Batteries with Ultralong Cycle Life.

A Bio-Inspired Multifunctional Hydrogel Network with Toughly Interfacial Chemistry for Highly Reversible Flexible Zinc Batteries

Flexible Aqueous Li-Ion Battery with High Energy and Power Densities

Long-Life flexible mild Ag-Zn fibrous battery with bifunctional gel electrolyte

High Areal Capacity and Long Cycle Life Flexible Mild Quaolid‐State Ag‐Zn Battery with Dendrite‐Free Anode

Flexible Aqueous Lithium‐Ion Battery with High Safety and Large Volumetric Energy Density

Alkaline Double-Network Hydrogels with High Conductivities, Superior Mechanical Performances, and Antifreezing Properties for Solid-State Zinc-Air Batteries

A Non-Flammable Flexible Aluminum-Lithium Dual-Ion Battery with a Wide Temperature Range Based on Ionic Liquid Electrolytes

A Rechargeable Zn–Air Battery with High Energy Efficiency and Long Life Enabled by a Highly Water‐Retentive Gel Electrolyte with Reaction Modifier

Recent advances in flexible alkaline Zinc-based batteries: Materials, structures, and perspectives

High-Strength agarose gel electrolyte enables long-endurance wearable Al-air batteries with greatly suppressed self-corrosion

Multi-functional Flexible Aqueous Sodium-Ion Batteries with High Safety

Architecting a Stable High-Energy Aqueous Al-Ion Battery