Abstract:Ternary extractive distillation (TED) is an effective and sustainable separation process for treating pharmaceutical wastewater containing ethyl acetate/isopropanol/water, corresponding to three binary azeotropes, to realize the recovery of ethyl acetate and isopropanol. Visual Basic software was used to optimize the extractive distillation process using a single solvent and mixed solvent in different proportions based on a sequential iterative optimization method, and the optimal mixture proportion (30% DMSO+70% EG) of the mixed solvent was determined. The economic and environmental performance of the extractive distillation process with a mixed solvent combined with partial thermal coupling technology was studied. The heat recovery within the separation process was further improved by the energy-efficient heat exchanger network synthesis (HENs) option. The economic and environmental performance of the mixed solvent extractive distillation process combined with heat pump technology was also explored. The results show that for the ternary extractive distillation process, the use of mixed solvent can significantly reduce energy consumption, which can lead to lower total annual cost (TAC) and CO2 emission. Compared with a conventional separation process with mixed solvent, the extractive distillation process combined with partial thermal coupling and heat pump technology further improves the economic and environmental performance. The TAC and CO2 emission of the mixed solvent separation process combined with partial thermal coupling technology were reduced by 12.183% and 19.869%, respectively. The TAC and CO2 emission of the mixed solvent separation process combined with heat pump distillation technology were reduced by 34.782% and 37.156%, respectively, which indicates the feasibility of using these two energy-saving processes for continuously updated cleaner production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c02225?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c02225</a>.Capital and energy calculation formulas, binary interaction parameters for the NRTL model for the separation system, and optimization results: (Table S1) interaction parameters of the NRTL model, (Table S2) basis of economics and equipment sizing, (Figure S1) distillation optimization software based on sequential iteration method, (Table S3) optimal process parameters for extractive distillation process using DMSO, EG, and mixed solvent, and (Table S4) economic and energy consumption results of all processes (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c02225/suppl_file/ie0c02225_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Energy-saving Investigation of Hybrid Reactive Distillation for N-Butyl Acetate Production from Two Blending Feedstocks

Molecular Dynamics-Assisted Process Design and Multi-Objective Optimization for Efficient Production of N-butyl Acetate by Reactive-Extractive Distillation/pervaporation

Hybrid Reactive Distillation Using Polyoctylmethylsiloxane Membrane for Isopentyl Acetate Production from Mixed PVA by Products

Economic, Environmental, Energy, Exergy (4E) and Inherent Safety Analysis of Hybrid Extractive-Heteroazeotropic Distillation for Sustainable Treatment of Crude N-Butanol Waste Liquor

Development of novel hybrid pre-separation/extractive reactive distillation processes for the separation of methanol/methyl acetate/ethyl acetate

Simulation Study on a Reactive Distillation Process of Methyl Acetate Hydrolysis Intensified by Reaction of Methanol Dehydration

Process design and optimization of the efficient production of butyl acrylate by reactive azeotropic distillation/pervaporation using different feed ratios

Process Development, Assessment, and Control of Reactive Dividing-Wall Column with Vapor Recompression for Producing N-Propyl Acetate

Design and comparison of energy-saving double column and triple column reactive-extractive hybrid distillation processes for ternary multi-azeotrope dehydration

Energy-saving hybrid processes combining pressure-swing reactive distillation and pervaporation membrane for n-propyl acetate production

Energy-saving investigation of ester hydrolysis to alcohol by reaction extractive distillation process: from molecular insight to process integration

Dual-objective optimization and energy efficiency enhancement of natural decantation assisted extractive distillation process for n -butanol/isobutanol/water separation

Partial heat-integrated reactive distillation process for producing n-propyl acetate using a heat exchanger network

Cost-saving and Control Investigation for Isopentyl Acetate Ionic Liquid Catalyzed Synthesis Through Conventional and Dividing-Wall Reactive Distillation

Towards on Energy-Saving and Cost-Reducing Heterogeneous Azeotropic Distillation Process for Separating N-Butanol/isobutanol/water

Design and Optimization of Energy-Saving Heterogeneous Azeotropic Distillation Processes for the Separation of Ternary Mixture of Ethyl Acetate/n-Propanol/water

Energy-efficient heterogeneous triple-column azeotropic distillation process for recovery of ethyl acetate and methanol from wastewater

Energy-Saving Exploration of Mixed Solvent Extractive Distillation Combined with Thermal Coupling or Heat Pump Technology for the Separation of an Azeotrope Containing Low-Carbon Alcohol

Energy-saving heat integrated extraction-azeotropic distillation for separating isobutanol-ethanol-water

Energy-saving Design of Azeotropic Distillation for the Separation of Methanol–methyl Methacrylate Azeotrope from Industrial Effluent

Coupled Reaction/Distillation Process for Hydrolysis of Methyl Acetate