Abstract:Owing to their excellent mechanical and tribological properties, like the well-known extreme hardness, low coefficient of friction and high chemical inertness, chemical vapor deposition (CVD) diamond films have found applications as a hard coating for drawing dies. The surface roughness of the diamond films is one of the most important attributes to the drawing dies. In this paper, the effects of different surface roughnesses on the friction properties of diamond films have been experimentally studied. Diamond films were fabricated using hot filament CVD. The WC-Co (Co 6[Formula: see text]wt.%) drawing dies were used as substrates. A gas mixture of acetone and hydrogen gas was used as the feedstock gas. The CVD diamond films were polished using mechanical polishing. Polished diamond films with three different surface roughnesses, as well as the unpolished diamond film, were fabricated in order to study the tribological performance between the CVD diamond films and different metals with oil lubrication. The unpolished and polished CVD diamond films are characterized with scanning electron microscope (SEM), atomic force microscope (AFM), surface profilometer, Raman spectrum and X-ray diffraction (XRD). The friction examinations were carried out by using a ball-on-plate type reciprocating friction tester. Low carbide steel, stainless steel, copper and aluminum materials were used as counterpart balls. Based on this study, the results presented the friction coefficients between the polished CVD films and different metals. The friction tests demonstrate that the smooth surface finish of CVD diamond films is beneficial for reducing their friction coefficients. The diamond films exhibit low friction coefficients when slid against the stainless steel balls and low carbide steel ball, lower than that slid against copper ball and aluminum ball, attributed to the higher ductility of copper and aluminum causing larger amount of wear debris adhering to the sliding interface and higher adhesive strength between the contacting surfaces.

Interfacial Friction Properties in Diamond Polishing Process and Its Molecular Dynamic Analysis

Insight into the mechanism of low friction and wear during the chemical mechanical polishing process of diamond: A reactive molecular dynamics simulation

Atomistic understanding of rough surface on the interfacial friction behavior during the chemical mechanical polishing process of diamond

Behaviors of Carbon Atoms Induced by Friction in Mechanical Polishing of Diamond

Preparation, Characterization and Investigation of Molecular Films Coated on Diamond-Like Carbon Substrate

Molecular Dynamics Simulations on the Frictional Behavior of a Perfluoropolyether Film Sandwiched Between Diamond-Like-carbon Coatings.

Molecular Dynamics Study of the Frictional Behaviors of Diamond-Like Carbon Films

Insights into the Atomistic Behavior in Diamond Chemical Mechanical Polishing with OH Environment Using ReaxFF Molecular Dynamics Simulation

FRICTION PROPERTIES OF POLISHED CVD DIAMOND FILMS SLIDING AGAINST DIFFERENT METALS

Multiscale Analysis of Friction Behavior at Fretting Interfaces

Diamond Nanoscale Surface Processing and Tribochemical Wear Mechanism

Influence of Surface Morphology of Diamond Films on Their Frictional Behaviors in Dry and Water Environments

Adhesion, Friction and Tribochemical Reactions at the Diamond-Silica Interface

Progress and prospect of diamond dynamic friction polishing technology

EFFECT OF POLISHING ON THE FRICTION BEHAVIORS AND CUTTING PERFORMANCE OF BORON-DOPED DIAMOND FILMS ON WC-Co INSERTS

Polishing of Polycrystalline Diamond by the Technique of Dynamic Friction—part 5: Quantitative Analysis of Material Removal

Effect of Surface Morphology on the Frictional Behaviour of Hot Filament Chemical Vapour Deposition Diamond Films

Molecular Dynamics Investigations On The Atomic-Scale Frictional Behavior Of Diamond Films

Nanotribological Properties of Oxidized Diamond/Silica Interfaces: Insights into the Atomistic Mechanisms of Wear and Friction by Ab Initio Molecular Dynamics Simulations

Probing the friction mechanism of diamond-like carbon films in aqueous environments based on molecular dynamics simulations

Wear Process of Single Crystal Diamond Affected by Sliding Velocity and Contact Pressure in Mechanical Polishing