Abstract:ABSTRACTA novel series of composites of polyarylene ether nitrile terminated with phthalonitrile (PEN‐t‐Ph) filled with hybrid Fe3O4 nanospheres (h‐Fe3O4) was prepared via in situ composition. Based on the cross‐linking interactions between the phthalonitrile at the end of PEN‐t‐Ph molecular chains and the phthalonitrile on the surface of h‐Fe3O4 particles to form phthalocyanine ring, it was shown that the PEN‐t‐Ph/h‐Fe3O4 system had superior interfacial compatibility and the h‐Fe3O4 particles were locked in the matrix resin. These results had been confirmed by scanning electron microscope analysis. By orthogonal experiments and statistic analysis, the optimal conditions of cure temperature, type of h‐Fe3O4 and content of h‐Fe3O4 had been determined. Meanwhile, the results of range analysis and variance analysis indicated that the cure temperature had great effects on the thermal properties. Thermal studies revealed that the glass transition temperature of PEN‐t‐Ph/h‐Fe3O4 cured at 320°C was 214.7°C, increased by about 40°C compared to the PEN‐t‐Ph/h‐Fe3O4 without heat treatment, and the temperature corresponding to the weight loss of 5 wt % was increased by about 20°C. Mechanical measurements indicated that PEN‐t‐Ph/h‐Fe3O4 cured at 320°C possesses excellent mechanical properties with tensile strength of 93.33 MPa and tensile modulus of 2414.05 MPa, 9.91 MPa, 355.76 MPa higher than pure PEN‐t‐Ph film cured at 320°C, and 13.26 MPa, 397.90 MPa higher than PEN‐t‐Ph/h‐Fe3O4 without heat treatment. Most importantly, the presence of h‐Fe3O4 particles endows PEN‐t‐Ph/h‐Fe3O4 system with good magnetic property. Thus, PEN‐t‐Ph/h‐Fe3O4 cured at 320°C may have potential applications in field of magnetic materials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40418.

Improving The Thermal And Mechanical Properties Of Poly(Arylene Ether Nitrile) Films Through Blending High- And Low-Molecular-Weight Polymers

Crystallized polyarylene ether nitrile blends with improved thermal, mechanical, dielectric properties, and processability

Plasticization Of Poly(Arylene Ether Nitrile) By The Melt Blending Of Phthalonitrile Prepolymer: A Rheological, Mechanical, And Thermal Study

Self-Toughening And Self-Enhancement Poly(Arylene Ether Nitrile) With Low Dielectric Constant By Solid Crosslinking Reaction

Rheology, Morphology, and Properties of Polyarylene Ether Nitrile Blends

Synthesis of phenolphthalein/bisphenol A‐based poly(arylene ether nitrile) copolymers: Preparation and properties of films

Novel phthalonitrile-terminated polyarylene ether nitrile with high glass transition temperature and enhanced thermal stability

Effect of curing behaviors on the properties of poly(arylene ether nitrile) end-capped with phthalonitrile

Crosslinking behavior of polyarylene ether nitrile terminated with phthalonitrile (PEN-t-Ph)/1,3,5-Tri-(3,4-dicyanophenoxy) benzene (TPh) system and its enhanced thermal stability

Study on the Plasticization and Properties of Polyarylene Ether Nitrile Copolymer Blending with Phthalonitrile Prepolymer

The Relationship Between Processing and Performances of Polyarylene Ether Nitriles Terminated with Phthalonitrile/trifunctional Phthalonitrile Composites

Strong and Tough Semi-Crystalline Poly(aryl Ether Nitrile) with Low Coefficient of Thermal Expansion

Effect of polyarylene ether nitriles on processing and mechanical behaviors of phthalonitrile-epoxy copolymers and glass fiber laminated composites

The influence of cross-linking reaction on the mechanical and thermal properties of polyarylene ether nitrile

Novel high-temperature-resistant single-polymer composites based on self-reinforced phthalonitrile end-capped polyarylene ether nitrile

Effective Thermal Conductivity and Thermal Properties of Phthalonitrile‐terminated Poly(arylene Ether Nitriles) Composites with Hybrid Functionalized Alumina

Synthesis and crosslinking behavior of a soluble, crosslinkable, and high young modulus poly(arylene ether nitriles) with pendant phthalonitriles

Study of Polyarylene Ether Nitrile Terminated with Phthalonitrile/Hybrid Fe3o4 Nanospheres Composites by Orthogonal Experiments

Design and properties of polyarylene ether nitrile copolymers with improved elongation at break

Synthesis and Properties of Crosslinked Poly(arylene Ether Nitriles) Containing Pendant Phthalonitrile

Effect of Polyarylene Ether Nitrile on the Curing Behaviors and Properties of Bisphthalonitrile