Abstract:Flow chart for the preparation of PEN‐based composite films. Thermal conductive polymer‐based composites synchronously with stable dielectric and excellent mechanical properties are urgently needed for high‐temperature‐resistant electronic devices. Here, a significant improvement in the thermal conductivity (TC), thermal stability, dielectric, and mechanical performance was simultaneously achieved in the polyarylene ether nitrile (PEN)/divinyl siloxane‐bisbenzocyclobutene (BCB) matrix through the incorporation of boron nitride nanosheets (BNNS) combined together with the post‐solid phase chemical reaction technique. The significant increase in the effective filler‐filler and filler‐crystal contacts in the composites was the main reason for the improvement in TC and dielectric constant. Besides, glass transition temperature (Tg) and mechanicals were enhanced in the presence of cross‐linked networks. By synchronously adding 15 vol% BNNS, the TC of composites after treatment reached up to 5.582 W/m.K, enhanced by 4.4 times higher than untreated. The dielectric constant was down to 2.93 at 1 MHz and the loss remained at a relatively low level. Meanwhile, the composite showed significantly enhanced thermal stability, mechanicals, and hydrophobicity (Tg = 336°C, T5% = 529°C, tensile strength and modulus was 94.5 MPa and 5.3 GPa, respectively, the contact angle was 101.76°). Thus, it promotes an effective strategy for fabricating a high‐performance‐polymer composite, which has the potential used in electronic materials. Highlights Crystallization‐crosslinking strategy optimizes overall performance. Crystals fill gaps between BNNS layers and connect thermal conductive pathway. Crosslinked networks limit molecular chain motion to reduce phonon scattering. The highest TC of the PEN/BCB/BNNS composite is up to 7.451 W/m.K. Thermal property shows significant improvement after crosslinking especially Tg.

Effect of polyarylene ether nitriles on processing and mechanical behaviors of phthalonitrile-epoxy copolymers and glass fiber laminated composites

Cure of Neat Resins and Properties of Composites for Interpenetrating Polymer Networks from the Novel Bismaleimide and Cyanate Containing Naphthalene

Properties of the Glass Fibre/interpenetrating Polymer Network Composites Based on Novel Naphthalene-Contained Bismaleimide and Cyanate Resin

Highly Thermal Conductive Benzoxazine‐epoxy Interpenetrating Polymer Networks Containing Liquid Crystalline Structures

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Synthesis of phenolphthalein/bisphenol A‐based poly(arylene ether nitrile) copolymers: Preparation and properties of films

Poly(arylene ether nitrile) copolymers containing pendant phenyl: Synthesis and properties

Synthesis and characterization of cyano-terminated bisphenol AF-type polyarylene ether nitrile

Study of the Self-Polymerization of Epoxy/Phthalonitrile Copolymers and Their High-Performance Fiber-Reinforced Laminates

Synthesis and Properties of Semicrystalline Poly(ether nitrile ketone) Copolymers

Designing and Preparation of Fiber-Reinforced Composites with Enhanced Interface Adhesion

Investigation on phenolphthalein and bisphenol AF based Poly(arylene ether nitrile) copolymers: Preparation, thermal, mechanical and dielectric properties

Preparation, Curing Properties, and Phase Morphology of Epoxy-Novolac Resin/multiepoxy-Terminated Low-Molecular-weight Poly(phenylene Oxide) Blend

Substantial improvement of thermal conductivity and mechanical properties of polymer composites by incorporation of boron nitride nanosheets and modulation of thermal curing reaction

Effect of ortho‐diallyl bisphenol A on the processability of phthalonitrile‐based resin and their fiber‐reinforced laminates

Preparation and physical properties of intrinsic low-k polyarylene ether nitrile with enhanced thermo-stability

Investigation on the Curing and Thermal Properties of Epoxy/Amine/Phthalonitrile Blend

Studies on the curing behavior, thermal, and mechanical properties of epoxy resin‐co‐amine‐functionalized lead phthalocyanine

Modification on phthalonitrile containing benzoxazine with hydroxy-terminated polyarylene ether nitrile: Curing reaction and thermomechanical properties

Thermal, mechanical and dielectric property enhancement of benzoxazine-containing phthalonitrile resin: The effect of functional oligomeric polyphenyl ether

A New Strategy to Improve the Toughness of Epoxy Thermosets—By Introducing Poly(ether nitrile ketone)s Containing Phthalazinone Structures