Non-monotonic evolution of microstructure and fatigue properties of round bar–plate rotary friction welding joints in 304 austenitic stainless steel
Kejin Zhang,Xusheng Qian,Jieshi Chen,Junmei Chen,Hao Lu
DOI: https://doi.org/10.1016/j.matdes.2022.111400
2022-01-01
Abstract:In this study, the structure and fatigue properties of a new type asymmetric round bar-plate rotary fric-tion welding (RFW) joints with three kinds of welding time, 0.8 s, 1.2 s and 3.6 s, were investigated. The results show that the RFW processing evolves from the heat stage to the quasi-steady stage with a trade-off of dynamic recrystallization (DRX) and grain boundary sliding (GBS). From 0 s for the base metal (BM) to 3.6 s, the DRX intensity changes from strong to weak relative to the GBS intensity, resulting in the non -monotonic evolution of the microstructure, e.g., the texture, the average grain size and the geometrically necessary dislocation, with welding time. The evolution results in non-monotonic evolution of the fatigue properties: specimens with welding time of 0.8 s, 1.2 s and 3.6 s, have fatigue lives of approximately 150,000, 200,000, and 100,000 cycles, respectively. The microstructure evolves with the welding time through the texture strength, grain size, and dislocation density, affecting the dislocation and slip mobil-ity. This evolution not only directly affects the rates of crack initiation and extension, but also makes the initiation point of fatigue crack change on the fillet, which affects the fatigue life.(c) 2022 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).