Abstract:Comprehensive tests were carried out to study the effect of rotation speed and plunge depth on small diameter (5 mm) 2B06Al-T42/7B04Al-T74 refill friction stir spot welding joints. The cross section microstructures, the effective connection height (ECH), and the effective connection width (ECW) were characterized. In the meantime, the thermal mechanically affected zone/stir zone and the fracture path were also described. The lap joint's hardness, shear strength, and failure mode were analyzed by optical microscope. It was found that the effective connection area (ECA = ECH × ECW) had a good correlation with the tensile shear property. At 1200 rpm, the plunge depth benefit improved the tensile shear strength of the welded joint, while at 1500 rpm, it had the opposite effect. The optimal welding parameters of 5 mm diameter joints were 2100 rpm of rotation speed and 1.0 mm of plunge depth, under those the tensile shear force of the joint was 3196.9 N. The shear-plug type fracture path was different at different rotational speeds. The fracture path of the welded joint at high rotational speed expanded from the stirring zone at 45° finally; while, the fracture path of the welded joint at low rotational speed fractured from the thermal–mechanical affected zone finally. The fracture path at high speed was more complex than at low speed.

Effect of rotation speed on friction behavior and radially non-uniform local mechanical properties of AA6061-T6 rotary friction welded joint

Effect of Rotation Speed on Friction Behavior of Rotary Friction Welding of AA6061-T6 Aluminum Alloy

Influence of Rotation Speed on Microstructure and Mechanical Properties of Friction Stir Lap Welded Joints of AA 6061 and Ti6Al4V Alloys

An Effect of the Rotation Speed on Microstructure and Mechanical Properties of the Friction Stir Welded 2060-T8 Al-Li Alloy

Influences of Rotation Speed on Microstructures and Mechanical Properties of 6061-T6 Aluminum Alloy Joints Fabricated by Self-Reacting Friction Stir Welding Tool

Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy

Structural Response of A286 Superalloy to Rotary Friction Welding at Different Rotation Speed

Effect of Rotational Speed on Mechanical Properties of AA5083/AA6082 Friction Stir Welded T-Joints for Naval Applications

Effect of Welding Speed on Microstructure and Mechanical Properties of Self-Reacting Friction Stir Welded 6061-T6 Aluminum Alloy

Effects of Rotational Speed on the Microstructure and Mechanical Properties of 2198-T8 Al-Li Alloy Processed by Friction Spot Welding

Influence of the rotation speed on the interface microstructure and joining quality of aluminum alloy 6061/CF-PPS joints produced by refill friction stir spot welding

The Effect of Rotational Speed on Microstructure and Mechanical Properties of Al/Ti Dissimilar Joint Produced by Refill Friction Stir Spot Welding

Microstructure and Mechanical Properties As a Function of Rotation Speed in Underwater Friction Stir Welded Aluminum Alloy Joints

Effect of Rotation Speed on Microstructure and Mechanical Properties of Self-Reacting Friction Stir Welded Al-Mg-Si Alloy

Effect of Rotation Speed on Microstructure and Mechanical Properties of Ti–6Al–4V Friction Stir Welded Joints

The Effect Of Welding Speed On Mechanical Properties And Microstructures Of Friction Stir Welded Joint Of Ai-Li Alloy

Effect of Tool Speed on Microstructure Evolution and Mechanical Properties of Friction Stir Welded Joints of Al-Mg-Si Alloy with High Cu Content

Effects of Tool Rotation Speed on Microstructures and Mechanical Properties of AA2219-T6 Welded by the External Non-Rotational Shoulder Assisted Friction Stir Welding

Microstructure Evolution and Mechanical Properties of Rotary Friction Welded TC4/SUS321 Joints at Various Rotation Speeds

Mechanical Properties and Their Relations to Microstructural Characteristics of High-Speed Friction Stir-Welded AA6005A-T6 Aluminum Hollow Extrusions

Mechanical Properties and Fracture Behavior of the Refill Friction Stir Spot Welding Dissimilar Aluminum Alloy Joints