Abstract:This study presents a multi-round shape optimization method based on the aerodynamic reduced order model. In this method, each optimization round employs the first-order Taylor reduced order model to provide aerodynamic characteristics in the local design space around the baseline point. At the end of each optimization round, the baseline point moves toward the optima and a new reduced order model is built at the new baseline point for the next optimization round. In this way, the provided method explores the whole design space. The NACA0012 airfoils in subsonic and transonic flows are used to verify the method with the lift-drag ratio as optimization objective. The design parameters are the shape control parameters of the airfoil. The optimization algorithm is a genetic algorithm. After a total of 20 simulations by two rounds of optimizations, the lift-drag ratios increase from 0 to 25 and from 0 to 8 in the subsonic case and transonic case, respectively. An additional trick was suggested for addressing shockwave effect in the transonic case, in which the influence of the airfoil shape on the aerodynamic forces is divided into the following two parts: the smoothed part to address the influence of the shape on the smooth aerodynamic distribution, and the shockwave part to address the influence of the shape on shockwave strength, shockwave position, and their effect on the aerodynamic distribution. The optimizations of the airfoils in subsonic and transonic flows yield different trends. The results of the subsonic case tend to increase the airfoil curvature to increase the lift-drag ratio. The results of the transonic case tend to move the upper surface shockwave to the trailing edge, while moving the lower surface shockwave to the leading edge. Independent of the case, the provided optimization method can properly address the resulting trends and increase the efficiency of the optimization.

An Effective Approach for Robust Design Optimization of Wind Turbine Airfoils with Random Aerodynamic Variables

Particle Swarm Optimization of Aerodynamic Shapes with Nonuniform Shape Parameter–Based Radial Basis Function

A Gradient-Based Method Assisted by Surrogate Model for Robust Optimization of Turbomachinery Blades

Multi-point robust design optimization of wind turbine airfoil under geometric uncertainty

Robust Design Optimization of an Aerospace Vehicle Prolusion System

Airfoil Robust Optimization Based on Convolutional Neural Network and Polynomial Chaos Method

Robust Design Optimization of a Two-Dimensional Airfoil with Deformable Trailing Edge

An Efficient Robust Aerodynamic Design Optimization Method Based on a Multi-Level Hierarchical Kriging Model and Multi-Fidelity Expected Improvement

Aerodynamic optimization of wind turbine airfoils using response surface techniques

Stochastic parameterized modeling for aerodynamic design of wind turbine airfoil

Robust Aerodynamic Shape Design Based on an Adaptive Stochastic Optimization Framework

Multi-objective Optimization Design for Airfoils with High Lift-to-drag Ratio Based on Geometric Feature Control

Surrogate-based robust design optimization of airfoil using inexpensive Monte Carlo method

Aerodynamic shape optimization by continually moving ROM

Aerodynamic Optimization Design of Low-Speed Airfoil Based on Response Surface Methodology

Multi-objective robust airfoil optimization based on non-uniform rational B-spline (NURBS) representation

Multi-point Aerodynamic Optimization Design Strategy of Rotor Airfoil With Multi-constrain Conditions

Robust Design of NLF Airfoils

Robust design optimization considering inlet flow angle variations of a turbine cascade

Robust design optimization of benchmark aerodynamic case based on polynomial chaos expansion

UNCERTAINTY QUANTIFICATION AND ROBUST DESIGN OF AIRFOIL BASED ON POLYNOMIAL CHAOS TECHNIQUE