Abstract:A robust multi-objective wing design optimization procedure using CFD is presented in this work. Instead of directly applying CFD to wing design optimization, a Kriging aerodynamic model that approximates CFD result is proposed to save computational cost. By introducing 6 sigma robust approach as a sub-objective function, multi-objective wing design problems can be solved with aerodynamic robustness. Non-Uniform Rational B-Spline curves (NURBS) are introduced to depict the wing geometry in design optimization process. The most important parameters of the wing geometry can then be screened by design of experiment and treated as design variables due to the local variation property of NURBS. Under this formulation, a multi-objective genetic algorithm based on non-dominated sorting is employed to handle multiple flight conditions in wing design. The optimum wing geometry is selected according to trade-off among design objects on the non-dominated front. To validate the proposed approach, two robust design optimization cases are studied for ONERA-M6-Wing. It turns out that the drag coefficient is insensitive to Mach number between Ma0.8-Ma0.9 after robust optimization. The result also verifies the effectiveness of our method in boosting performance and robustness of multiple flight conditions: the lift curve slope (Ma0.3) of optimum wing and the 6 sigma objective function of transonic drag (Ma0.8-Ma0.9) increase by 11.9% and 25.4%, respectively. Observations in the optimization cases are concluded as follows: 1) For wing aerodynamic design problems, the multi-objective robust optimization can both improve the performance at different flight conditions and provide robustness. 2) The Kriging aerodynamic model derived from CFD result can satisfy the precision requirement of wing design. 3) Even though the optimization result is subject to the weights of the 6 sigma function in sub-object, the influence is not comparable to the trade-off among design objects. 4) The optimum solution obtained by proposed approach is superior to gradient based optimization method, while the computational cost is acceptable.

Multi-point robust design optimization of wind turbine airfoil under geometric uncertainty

A Gradient-Based Method Assisted by Surrogate Model for Robust Optimization of Turbomachinery Blades

Aerodynamic Shape Optimization Of A Turbine Blade Considering Geometric Uncertainty Using An Adjoint Method

Multi-objective Optimization Design for Airfoils with High Lift-to-drag Ratio Based on Geometric Feature Control

Robust Design Optimization of a Two-Dimensional Airfoil with Deformable Trailing Edge

Multi-objective robust airfoil optimization based on non-uniform rational B-spline (NURBS) representation

Multi-point Aerodynamic Optimization Design Strategy of Rotor Airfoil With Multi-constrain Conditions

An Efficient Robust Aerodynamic Design Optimization Method Based on a Multi-Level Hierarchical Kriging Model and Multi-Fidelity Expected Improvement

MULTI OBJECTIVE OPTIMIZATION METHODOLOGY FOR AIRFOIL ROBUST DESIGN UNDER GEOMETRY UNCERTAINTY

Multidisciplinary Probabilistic and Robust Design Optimization for Turbine Blade

Robust Design Optimization of an Aerospace Vehicle Prolusion System

Robust Multi-Objective Wing Design Optimization Via Cfd Approximation Model

Robust optimization design of a flying wing using adjoint and uncertainty-based aerodynamic optimization approach

Airfoil Robust Optimization Based on Convolutional Neural Network and Polynomial Chaos Method

MULTIPOINT OPTIMIZATION WIND TURBINE AIRFOILS BASED ON PARETO GENETIC ALGORITHM

A data-driven robust design optimization method and its application in compressor blade

Surrogate-based aerodynamic shape optimization with application to wind turbine airfoils

Effective Robust Design of High Lift Nlf Airfoil under Multi-Parameter Uncertainty

Aerodynamic shape optimization by continually moving ROM

Aerofoil Optimization for Improving the Power Performance of a Vertical Axis Wind Turbine Using Multiple Streamtube Model and Genetic Algorithm.

Surrogate-based robust design optimization of airfoil using inexpensive Monte Carlo method