Abstract:Engineering Cementitious Composites (ECC) are fibre-reinforced cementitious materials with excellent tensile strain capacity. Recycling powder from building and demolition waste can improve the ecological efficiency of concrete and reduce the cost of raw materials. In this study, recycled glass powder (RGP) was used to partially replace traditional cement. Based on using a 1:1 replacement of recycled brick powder (RBP) and recycled concrete powder (RCP) for fine aggregates, two sets of variables were set: the RGP substitution rate (10 %, 15 %, 20 %, and 25 %) and RGP particle-size range (38-75 mu m, 75-150 mu m, and 150-300 mu m). Comprehensive material testing and mechanical experiments were conducted, including X-ray diffraction analysis, thermogravimetric analysis, shrinkage tests, uniaxial compressive tests, uniaxial tensile tests, and scanning electron microscopy. The results indicated that fully substituting quartz sand with RBP and RCP enhanced the ECC performance. Incorporating RGP significantly improved the ultimate tensile strain and crack-propagation ability of the ECC while reducing the 90-d shrinkage rate. The 28-d compressive strength and tensile strength have some loss, but can meet the strength requirements. SEM showed that incorporating RGP weakened the bonding strength of the fibre matrix, making it easier for the fibres to be pulled out. By evaluating the experimental results, the mix ratio of a 20 % substitution rate and 75-150-mu m size was selected. A material-sustainability indicator (MSI) analysis of the raw materials and production process of RGP-ECC was performed. The embodied energy, carbon emissions, and economic indices were reduced to a certain extent, thereby improving the ecological efficiency of concrete.

Deformability enhancement of fiber-reinforced cementitious composite by incorporating recycled powder

Using Green Supplementary Materials To Achieve More Ductile Ecc

Strategies for Reusing Multiple Recycled Powders: Evaluating the Mechanical Performance and Sustainability of Engineered Cementitious Composites (ECC)

Micro-structural and Mechanical Properties of Ultra-High Performance Engineered Cementitious Composites (UHP-ECC) Incorporation of Recycled Fine Powder (RFP)

Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

Crack Development and Fracture Performance of Recycled Powder Engineered Cementitious Composites (ECC): Experimental Investigation

Development of Sustainable Engineered Cementitious Composites by Incorporating Local Recycled Fine Aggregate

Effect of Fiber Content on the Mechanical Properties of Engineered Cementitious Composites with Recycled Fine Aggregate from Clay Brick

Preliminary Analysis of the Ductility and Crack-Control Ability of Engineered Cementitious Composite with Superfine Sand and Polypropylene Fiber (SSPP-ECC)

An Investigation on the Performance Enhancement and Cost Reduction of Engineered Cementitious Composites Developed with Local PVA and PET Fibers

The Effect of Recycled Sand on the Tensile Properties of Engineered Cementitious Composites

Mechanical Performance of High-Strength Engineering Cementitious Composites (ECC) with Hybriding PE and Steel Fibers

Mechanical Properties of SAC-ECC Reinforced with Fiber-Reinforced Polymer Mesh

Influence of Rubber Powder on the Mechanical Behavior of Engineered Cementitious Composites

Preparation and mechanical characterization of engineered cementitious composites with high-volume fly ash and waste glass powder

Mechanical Properties of Ecological High Ductility Cementitious Composites Produced with Recycled Crumb Rubber and Recycled Asphalt Concrete

Investigation of the Mechanical Properties of Engineered Cementitious Composites with Low Fiber Content and with Crumb Rubber and High Fly Ash Content

Fully Recycled Engineered Geopolymer Composite: Mechanical Properties and Sustainability Assessment

Effect of engineered cementitious composite on the bond behavior between fiber-reinforced polymer and concrete

Use of high volumes of fly ash to improve ECC mechanical properties and material greenness

Study of Mechanical Properties of an Eco-Friendly Concrete Containing Recycled Carbon Fiber Reinforced Polymer and Recycled Aggregate