Abstract:The interfacial compatibility plays an important role in the performance of fiber-reinforced composite laminates. Aramid fiber is an important class of high performances fibers. However, the inertia of fiber surface is not conducive to the improvement of composite properties. In this work, polyarylene ether nitrile terminated with phthalonitrile (PEN-t-Ph) was supplied to modify the aramid fiber (m-AF). By heat treatment and riveting PEN-tPh to the fiber surface, a rough fiber surface can be obtained, and then the composite material with improved performance can be obtained through the entangling compatibility. Through SEM images, it could be seen that the fiber surface had the best rivet surface morphology when the fiber surface coated with 5 wt% PEN-t-Ph (m(5 wt%)-AF). At the same time, the interfacial adhesion between m(5 wt%)-AF and the resin matrix showed the best peel strength of 1.594 kN/m. Based on these results, modified fiber resin composite laminates (m(5 wt%)-AF/ PEN-t-Ph) were fabricated. The results indicated that the laminates had good interfacial compatibility and the interlaminar shear strength (ILSS) of modified aramid fiber laminates was 112.58 MPa, which is increased by 21.4% than that of original fiber composite laminates. In addition, the flexural strength of m-AF/PEN-t-Ph laminates was 324 MPa, increased by 10% compared to AF/PEN-t-Ph. The results of DMA showed that the energy storage modulus of the m-AF/PEN-t-Ph laminate was greatly improved compared with that of AF/PEN-t-Ph laminate, which was increased by 60% under the initial condition of 100 C. To sum up, through surface treatment, the mechanical properties of fiber-reinforced composite laminates had been greatly improved, making them have great application prospects in bulletproof and other fields.

Enhanced adhesion property of aramid fibers by polyphenol-metal iron complexation and silane grafting

Surface Modification of Aramid Fibers by Catechol/Polyamine Codeposition Followed by Silane Grafting for Enhanced Interfacial Adhesion to Rubber Matrix

Enhanced interfacial adhesion of aramid fiber reinforced rubber composites through bio‐inspired surface modification and aramid nanofiber coating

Nondestructive Grafting of ZnO on the Surface of Aramid Fibers Followed by Silane Grafting to Improve Its Interfacial Adhesion Property with Rubber

Surface Modification of Aramid Fibers by Amino Functionalized Silane Grafting to Improve Interfacial Property of Aramid Fibers Reinforced Composite

Surface Coating of Aramid Fiber by a Graphene/Aramid Nanofiber Hybrid Material to Enhance Interfacial Adhesion with Rubber Matrix

Influence of aramid fibers modified by glycidyl polyhedral silsesquioxane assisted with supercritical carbon dioxide on the properties of aramid fiber‐reinforced styrene butadiene rubber composites

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Polydopamine and Mercapto Functionalized 3D Carbon Nano-Material Hybrids Synergistically Modifying Aramid Fibers for Adhesion Improvement

Synergistic Modification by Mercapto Hyperbranched Polysiloxane and Functionalized Graphene Oxide on the Surface of Aramid Fiber

Surface modification of aramid fiber by crystalline polyarylene ether nitrile sizing for improving interfacial adhesion with polyarylene ether nitrile

Preparation of highly active aramid fiber and effect on the interface property of aramid/epoxy composites

Study on Interfacial Adhesion of the Aramid Fibers/rubber Matrix by Grafting Mercapto Hyperbranched Polysiloxane

Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites

Improved adhesion properties of poly-p-phenyleneterephthamide fibers with a rubber matrix via UV-initiated grafting modification

Enhancing The Interfacial Adhesion With Rubber Matrix By Grafting Polydopamine-Carbon Nanotubes Onto Poly(P-Phenylene Terephthalamide) Fibers

In situ creation of aramid fiber surface coating with polymerizable deep eutectic solvents and their interfacial bonding properties with rubber

Highly efficient mussel-like inspired modification of aramid fibers by UV-accelerated catechol/polyamine deposition followed chemical grafting for high-performance polymer composites

Spider silk inspired bead-like aramid nanofibers via hydrogen-bond donor strategy for synergistic reinforcement of high-performance rubber composite

Surface Modification of Hybrid-Fabric Composites with Amino Silane and Polydopamine for Enhanced Mechanical and Tribological Behaviors

Surface modification of aramid fibers by bio-inspired poly(dopamine) and epoxy functionalized silane grafting.