Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Fabrication of Durable and Roughness-Regeneration Superhydrophobic Composite Materials by Hot Pressing

Abrasion‐Resistant, Hot Water‐Repellent and Self‐Cleaning Superhydrophobic Surfaces Fabricated by Electrophoresis of Nanoparticles in Electrodeposited Sol–Gel Films

Facile Fabrication of Durable Superhydrophobic Materials from Mineral Soil with Wear-Resistance

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Compression Molding Processed Superhydrophobic CB/CeO2/PVDF/CF Nanocomposites with Highly Robustness, Reusability and Multifunction

Facile Design and Fabrication of Superwetting Surfaces with Excellent Wear-Resistance

Fabrication of Mechanical Durable Polysiloxane Superhydrophobic Materials

Fabrication of durable polytetrafluoroethylene superhydrophobic materials with recyclable and self-cleaning properties on various substrates

Concrete inspired superhydrophobic nanocomposite coating with high robustness

Superhydrophobic Composite Coating with Excellent Mechanical Durability

Fabrication and Wear-Resistance of Abrasion-Enhanced Superhydrophobic Materials

A Versatile and Efficient Method to Fabricate Recyclable Superhydrophobic Composites Based on Brucite and Organosilane

Preparation of Durable Superhydrophobic Coatings Based on Discrete Adhesives

Fabrication of Robust and Repairable Superhydrophobic Coatings by an Immersion Method

Fabrication of Superhydrophobic Composite Coating Based on Fluorosilicone Resin and Silica Nanoparticles

Preparation of Robust Superhydrophobic Coatings Using Hydrophobic and Tough Micro/Nano Particles

Substrate-versatile Approach to Fabricate Mechanochemically Robust and Superhydrophobic Surfaces from Waste Fly Ash

Mechanically Durable Superhydrophobic Surfaces Prepared by Abrading

A Versatile and Efficient Method to Fabricate Durable Superhydrophobic Surfaces on Wood, Lignocellulosic Fiber, Glass, and Metal Substrates

Fabrication of Robust Superhydrophobic Surfaces with Dual-Curing Siloxane Resin and Controlled Dispersion of Nanoparticles

Fabrication of a Scratch & Heat Resistant Superhydrophobic SiO2 Surface with Self-Cleaning and Semi-Transparent Performance