Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Facile Fabrication of Durable Superhydrophobic Materials from Mineral Soil with Wear-Resistance

Fabrication of Recyclable and Durable Superhydrophobic Materials with Wear/corrosion-Resistance Properties from Kaolin and Polyvinylchloride

Fabrication of durable polytetrafluoroethylene superhydrophobic materials with recyclable and self-cleaning properties on various substrates

Bioinspired durable superhydrophobic materials with antiwear property fabricated from quartz sands and organosilane

Facile Design and Fabrication of Superwetting Surfaces with Excellent Wear-Resistance

Substrate-versatile Approach to Fabricate Mechanochemically Robust and Superhydrophobic Surfaces from Waste Fly Ash

Preparation of Durable Superhydrophobic Coatings Based on Discrete Adhesives

Substrate-versatile approach to multifunctional superamphiphobic coatings with mechanical durable property from quartz sand

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Ecofriendly fabrication of superhydrophobic coating with high chemical/mechanical durability and enhanced heat resistance by 1D/2D hybridization strategy

Facile Fabrication of a Mechanical, Chemical, Thermal, and Long‐Term Outdoor Durable Fluorine‐Free Superhydrophobic Coating

Fabrication of Recyclable Superhydrophobic Materials with Self-Cleaning and Mechanically Durable Properties on Various Substrates by Quartz Sand and Polyvinylchloride

Concrete inspired superhydrophobic nanocomposite coating with high robustness

Investigation on fabrication of durable superhydrophobic surface based on multi-adhesive strategy

Facile preparation of robust superhydrophobic ceramic surfaces with mechanical stability, durability, and self-cleaning function

Preparation of superhydrophobic coatings with excellent mechanical and chemical stability by one-step spraying method with selected fluorine-free modifiers

Rational fabrication of high-durability superhydrophobic coatings based on the excellent compatibility between nanoparticles and polymers

An all-water-based system for robust superhydrophobic surfaces

Fabrication of durable underoil superhydrophobic surfaces with self-cleaning and oil-water separation properties

Design robust, degradable and recyclable superhydrophobic materials

Superhydrophobic Composite Coating with Excellent Mechanical Durability